Amarok 2011 ➤, Amarok 2017 ➤
Electrical system - Edition 12.2020
7
Number plate light
⇒ a7.1 nd installing number plate light”, page 178
⇒ a7.2 nd installing bulb for number plate light”, page 179
7.1
Removing and installing number plate
light
Note
♦ When removing and installing components that are in view
(switches, covers, trim and so on), mask off areas in which
tools (assembly wedge -T10039/1-, screwdriver) are used
to lever out those components using commercially available
masking tape.
♦ The removal and installation procedure for both number
plate lights is carried out in the same way and is only descri‐
bed for one light.
Removing:
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Using a screwdriver, lever number plate light out of bumper
cover -arrow-.
– Release and disconnect connector -arrow-.
– Remove number plate light.
Installing:
Install in the reverse order of removal. When doing this, note
the following:
178
Rep. gr.94 - Lights, bulbs, switches - exterior
English 
