Interiorequipment -> Centre console for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
4
Centre console  
lk  
4.1  
Assembly overview - centre console  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
1 - Centre console  
❑ ⇒ Rep. gr. 68 ; Re‐  
moving and installing  
centre console  
2 - Bolt  
❑ Qty. 8  
❑ 1.5 Nm  
3 - Front storage compart‐  
ment on centre console  
❑ ⇒ Rep. gr. 68 ; Re‐  
moving and installing  
front centre console  
storage compartment  
4 - Brake  
❑ Renew only with centre  
console  
5 - Spring  
❑ Renew only with centre  
console  
6 - Pin  
❑ Renew only with centre  
console  
7 - Bolt  
❑ Renew only with centre  
console  
8 - Support  
❑ Renew only with centre  
console  
9 - Cup holder  
❑ Renew only with centre  
console  
36  
Rep. gr.68 - Interior equipment  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
4.2  
Removing and installing front centre  
console storage compartment  
Removing  
– Use commercially available plastic wedge to unclip centre  
console front compartment -1-, and remove it.  
Installing  
Install in reverse order of removal.  
4.3  
Removing and installing centre console  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Remove glove compartment cover ⇒ Rep. gr. 68 ; Remov‐  
ing and installing glove compartment cover .  
– Remove dash panel trim on driver side ⇒ Rep. gr. 68 ;  
Removing and installing dash panel trim on driver side .  
– Remove footwell cover on driver side ⇒ Rep. gr. 68 ; Re‐  
moving and installing footwell cover on driver side .  
– Remove footwell cover on front passenger side ⇒ Rep.  
gr. 68 ; Removing and installing footwell cover on front pas‐  
senger side .  
– Unscrew bolts -1-.  
4. Centre console  
37  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolts -1-.  
– Open cup holder.  
– Unscrew bolts -1-.  
– Unscrew bolts -2-.  
– Pull off centre console -3- far enough to gain access to  
electrical connectors.  
– Disconnect electrical connectors.  
– Remove centre console -3-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 68 ; Assembly overview - centre console  
38  
Rep. gr.68 - Interior equipment  

Related Topics