Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
– Position pliers - T10558A- centrally in retaining clips -3-.
– Detach foremost (when seen in direction of travel) retaining
clip -3- in sun visor bracket -1- using pliers - T10558A- .
– To prevent front retaining clip -3- from engaging, pull sun
visor -2- lightly downwards.
– Detach rearmost (when seen in direction of travel) retaining
clip -3- in sun visor bracket -1- using pliers - T10558A- .
– Pull sun visor -2- downwards.
NOTICE
Risk of damage to electrical wiring by pulling too forcefully.
– Carefully pull electrical wiring out of opening.
lk
– Disconnect electrical connector.
– Remove clamping plate.
– Remove sun visor.
Installing
Install in reverse order of removal, observing the following:
– Wrap electrical connector with one layer of foam tape.
– Reach with a finger into recess of vanity mirror light and pull
moulded headliner down slightly.
– Position electrical connector between moulded headliner
and roof cross member.
– Engage foremost (when seen in direction of travel) retaining
clip.
– Engage rearmost (when seen in direction of travel) retaining
clip.
– Ensure that both retaining clips are properly engaged.
24
Rep. gr.68 - Interior equipment
English 
