Interiorequipment -> Removing and installing glove compartment cover for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Disconnect electrical connector -3-.  
– Turn restrictor -2- in direction of -arrow- in mounting of glove  
compartment on front passenger side -1-.  
– Remove restrictor -2-.  
Installing  
Install in reverse order.  
2.10  
Glove compartment, service position  
Moving to service position  
– Open glove compartment -2-.  
– Push buffer stops -1- in direction of -arrow A-, and fold  
out glove compartment -2- as far as stop in direction of  
-arrow B-.  
– Unclip push rod from restrictor at side on glove compart‐  
ment.  
Moving from service position  
– Slowly close glove compartment until cover can be heard to  
engage.  
2.11  
Removing and installing glove com‐  
partment cover  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
12  
Rep. gr.68 - Interior equipment  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove dash panel end cover on front passenger side  
⇒ Rep. gr. 70 ; Removing and installing dash panel end  
cover, front passenger side .  
– Remove lower centre dash panel trim ⇒ Rep. gr. 70 ; Re‐  
moving and installing lower centre dash panel trim .  
– Unscrew bolts -1-, -3- and -4-.  
lk  
– Perform ⇒ Rep. gr. 68 ; Service position of glove compart‐  
ment .  
– Unscrew bolt -2-.  
– Detach glove compartment cover -1- to gain access to elec‐  
trical connectors.  
– Disconnect electrical connector of right footwell light - W10-  
and glove compartment light - W6- .  
Installing  
Install in reverse order of removal, observing the following:  
2. Compartments/covers  
13  

Related Topics