Get Quick help -> Changing a wheel Guide for Citroen Relay Van 2014-2024

Failed bulb or lamp

-

Remove the bulb holder by squeezing

the two tabs.

number plate lamps

third brake lamp

type c, C5W - 5W

type A, W5W - 5W (x 4)

-

Remove the failed bulb by pulling it out.

Change the bulb.

-

Press the point, indicated by the arrow,

then remove the plastic lens.

-

Remove the two lamp fixing screws.

Remove the lamp by pulling it towards

you.

Remove the failed bulb by moving aside

the two contacts.

With the new bulb in place, ensure

that it is secured correctly between the

two contacts.

-

Replace the plastic lens and press on it

to lock it in place.

Worn wiper blade

cHAnGInG A WIPEr BLAdE

The steps, located in the front bumper,

enable you to reach the blades and the

screenwash jets.

changing a front wiper blade

Raise the wiper arm.

Unclip the blade by pressing the button and

remove it by pulling it outwards.

Check that the screenwash or

Fit the new blade and ensure that it is

headlamp wash jets are not blocked.

secured correctly.

Return the wiper arm to the normal position.

8

Puncture

Pneumatic suspension

cHAnGInG A WHEEL

tools

If you vehicle is fitted with this system, you

must first activate vehicle lifting mode.

Parking the vehicle

These are stowed in a box located under the

front passenger seat.

Press the two controls simultaneously for

at least 5 seconds; their indicator lamps

come on.

Where possible, park the vehicle on level,

stable and non-slippery ground.

-

Turn the button a quarter of a turn then

pull the box.

Apply the parking brake, switch off the

ignition and engage first gear.

-

After use, press the button then turn it a

This mode is deactivated automatically after

changing a wheel, once the speed of the

vehicle has exceeded 3 mph (5 km/h).

quarter of a turn to secure the box.

Wear a high visibility vest and position the

warning triangle on the road.

A. Long socket.

B. Bar.

You must ensure that the occupants get out

of the vehicle and wait in a safe location.

c. Jack.

The jack and the tool kit are specific to

your vehicle. Do not use them for other

purposes.

d. Wheelbrace.

E. Screwdriver (handle and bits).

F. Removable towing eye.

G. Oil filler funnel.

Never go underneath a vehicle supported

only by a jack (use an axle stand).

Puncture

Spare wheel

The spare wheel retaining bolt is located

below the bumper on the right.

●

For versions with steel wheels, unscrew

the grip H.

●

For versions with alloy wheels, remove

the three fixing screws j from the

strap K.

-

Install the long socket A, the

wheelbrace d and the bar B on the

retaining bolt.

Remove the carrier I from the outer part

of the steel wheel.

Remove the assembly from inside the

alloy wheel.

-

Turn the assembly anti-clockwise to

lower the wheel.

-

Release the spare wheel and place it

near the wheel to be changed.

Turn to the full extent, indicated by an

increase in the force required.

-

If possible, place a chock against the

wheel diagonally opposed to the wheel

to be changed.

Having fully unwound the cable, take out

the spare wheel under the vehicle.

8

Puncture

removing the wheel to be repaired

-

Remove the trim (depending on version)

using the screwdriver E as a lever.

-

Position the jack c at one of the four

locations provided on the underbody

near the wheels.

-

Extend the jack using the wheelbrace d

and the bar B until the wheel is a few

centimetres off the ground.

-

Release the bolts using the

wheelbrace d and the bar B.

If your vehicle has a folding foot board, the

jack must be positioned at 45°.

-

Unscrew the bolts fully and remove the

wheel to be repaired.

Quick help -> Changing a wheel for Your Citroen Relay Van 2014-2024

Related Topics

Quick help

Popular Owner Manuals

Latest Owner Manuals