Puncture
-
Start the engine.
PuncturE rEPAIr KIt
repairing the tyre
-
Insert the connector G into the nearest
power socket on the vehicle.
This temporary puncture repair kit stowed
in a bag located in one of the front door
pockets.
-
Apply the parking brake.
-
Unscrew the tyre valve cap, remove the
filling hose B and screw the ring E onto
the valve.
-
-
Switch on the compressor by placing the
switch F in position "I" (on),
It consists of:
Inflate the tyre to a pressure of 5 bar.
-
a cartridge A, containing the sealant
fluid, equipped with:
To obtain a more accurate reading, you are
advised to check the pressure value on the
pressure gauge H, with the compressor off.
● a filling hose B,
● a sticker c indicating "max. 80 km/h",
which the driver must affix in full
view (on the dashboard) after
repairing the tyre,
-
a quick guide to use of the repair kit,
-
a compressor d equipped with a
pressure gauge and unions,
-
adaptors, for the inflation of various
items.
-
Check that the switch F on the
compressor is in position "0" (off).
8
English 
