Failed bulb or lamp
-
Identify the failed bulb then open the
rear doors.
-
-
-
Remove the six bulb holder fixing
screws.
rear lamps
For more information on the bulbs,
refer to the table "Types of bulb or
lamp".
-
Remove the corresponding access
cover by removing the seven fixing
screws (van)
Spread the three retaining tongues and
remove the bulb holder from its housing.
Change the bulb.
or
Carry out these operations in reverse order
to fit the new bulb.
Remove the corresponding access cover
by pulling on its grip to unclip it (combi).
1. Brake lamps
-
Disconnect the electrical connector by
type B, P21W - 21W
2. Brake/sidelamps
type B, P21/5W - 21W and 5W
3. direction indicators
type B, PY 21W - 21W
4. reversing lamps
type A, W16W - 16W
5. Foglamp
pressing on its central tongue.
-
-
Remove the two fixing nuts of the lens.
Pull the lens from the outside.
8
type A, W16W - 16W
English 
