Puncture
refitting the repaired wheel
Refitting the repaired wheel is the same as
fitting the spare wheel; don't forget to refit
the wheel trim.
The spare wheel is not designed to be used
over long distances. Have the tightening of
the bolts and pressure of the spare wheel
checked by a CITROËN dealer or a qualified
workshop without delay.
Also, have the original wheel repaired and
refitted by a CITROËN dealer or a qualified
workshop as soon as possible.
-
-
Fit the long socket A, the wheelbrace d
and bar B to the securing screw.
Refer to the "Technical data -
Identification markings" section for the
location of the tyre pressure label.
Turn the assembly clockwise to fully
draw in the cable and raise the wheel
under the vehicle.
-
-
Check that the wheel is positioned
horizontally flat against the floor of
the vehicle and that the cut-out for the
carrier system is visible.
Stow the tools and the trim (depending
on version).
English 
