2020-2024 Cupra Formentor SUV Operation -> Roof carrier User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Operation -> Roof carrier for Your Cupra Formentor SUV First Generation (2020-2024)

Operation  
Close the rear lid.  
WARNING  
Never use the hooks to hang luggage or  
other objects. In case of sudden braking or  
an accident, the hooks could break.  
Closing the tailboard  
Lift the tailboard cover until it engages. The  
red mark on the luggage compartment side  
should never be visible.  
Close the rear lid.  
Trapdoor for transporting long  
objects  
Lift the centre armrest if necessary.  
Note  
Fig. 122 In the luggage compartment:  
opening the trapdoor.  
The tailboard can also be opened from the  
luggage compartment. To do so, press the  
release lever down, in the direction of the  
On the rear seat, behind the central armrest,  
there is a tailboard for transporting long  
items in the interior, such as skis.  
arrow, and the cover upwards Fig. 122 .  
›››  
To avoid soiling the interior, dirty objects  
should be wrapped (e.g. in a blanket) before  
they are inserted through the tailboard.  
Roof carrier  
When the armrest is down, nobody may trav-  
el in the centre rear seat.  
Introduction  
Fig. 121 In the rear seat backrest: opening  
the trapdoor.  
The vehicle roof has been designed to opti-  
mise aerodynamics. For this reason, cross  
bars or conventional roof carrier systems  
cannot be secured to the roof water drains.  
Opening the tailboard  
Lower the centre armrest.  
Pull the release lever in the direction of the  
As the roof water drains are integrated in the  
roof to reduce air resistance, only CUPRA-  
approved cross bars and roof carrier systems  
can be used.  
arrow and push the tailboard cover  
1
Fig. 121  
down and forwards.  
›››  
Open the rear lid.  
Insert the long objects through the gap  
from the luggage compartment.  
Secure the objects with the seat belt.  
140  
Transport and practical equipment  
Cases in which cross bars and the roof car-  
rier system should be disassembled.  
or boats on the roof. The appropriate acces-  
sories can be purchased at specialised CU-  
PRA dealers or any SEAT dealership.  
fere with the roof aerial or hamper the path  
of the panoramic sun roof and the rear lid.  
When they are not used.  
On opening the rear lid make sure that it  
does not knock into the roof load.  
Always secure the crossbars and the roof  
carrier system properly. Always take the as-  
sembly instructions that come with the  
crossbars and the roof carrier system in  
question into account.  
When the vehicle is washed in a car wash.  
When the vehicle height exceeds the max-  
For the sake of the environment  
imum height, for example, in some garages.  
When cross bars and a roof carrier system  
are installed, the increased air resistance  
means that the vehicle uses more fuel.  
WARNING  
The crossbars are assembled on the roof  
Always secure the load properly using  
railings. The distance between crossbars  
belts or retaining straps that are suitable  
and in a good condition.  
A
Fig. 123  
should be between 70 and 90  
›››  
cm and the distance between the crossbars  
Bulky, heavy, long or flat loads have a  
Securing the crossbars and the  
roof carrier system  
B
and the brackets of the roof railings  
be 15 cm.  
must  
negative effect on aerodynamics, the cen-  
tre of gravity and driving performance.  
Avoid sudden braking and manoeuvres.  
Adapt your speed and driving style at all  
WARNING  
Incorrect attachment and use of the cross-  
bars and the roof carrier system may cause  
the whole system to detach from the roof  
and cause an accident and injuries.  
times to suit visibility, weather, road and  
traffic conditions.  
CAUTION  
Always take the manufacturer assembly  
instructions into account.  
Remove the cross bars and the roof carri-  
er system before entering a car wash.  
Check threaded joints and attachments  
travelling and if necessary tighten them af-  
ter you have travelled a short distance.  
When making long trips, check the threa-  
ded joints whenever you stop for a rest.  
Vehicle height is increased by the instal-  
lation of cross bars or a roof carrier system  
and the load secured on them. For this pur-  
pose, check that your vehicle's height does  
not surpass the headspace limit, for exam-  
ple, for underpasses or for entering garage  
doors.  
Fig. 123 Attachment points for the roof  
railings for the roof carrier system.  
Do not modify or repair the crossbars or  
»
roof carrier system.  
The crossbars are the basis of a series of  
special roof carrier systems. For safety rea-  
sons, special fixtures must be used to safely  
transport luggage, bicycles, skis, surf boards  
Cross bars, the roof carrier system and  
the load secured on them should not inter-  
141  

Related Topics

Popular Owner Manuals