2020-2024 Cupra Formentor SUV Operation -> Using the instrument panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Operation -> Using the instrument panel for Your Cupra Formentor SUV First Generation (2020-2024)

Operation  
fixed key symbol may appear on the in-  
strument panel for a few seconds, along with  
one of the following messages:  
The service interval display can only be re-  
Using the instrument panel  
set through the Service menu page 69 .  
›››  
Introduction  
Do not restart the indicator between the  
service intervals, otherwise the information  
displayed will be incorrect.  
Service now!  
With the ignition switched on, it is possible to  
read the different functions of the display by  
scrolling through the menus.  
Please have your vehicle inspec-  
ted.  
If the oil change service is reset manually,  
the service interval display changes to a fixed  
service interval, also in vehicles with Flexible  
oil change service.  
Oil change service due!  
The multifunction display can only be con-  
trolled from the buttons on the multi-func-  
tion steering wheel.  
Oil change service and inspection  
due!  
Note  
Some menu options can only be read when  
the vehicle is at a standstill.  
Consult a service notification  
The service message disappears after a  
With the ignition switched on, the engine off  
and the vehicle at a standstill, the current  
service notification can be read:  
few seconds, when the engine is started or  
when the  button is pressed on the multi-  
function steering wheel.  
WARNING  
Distracting the driver in any way can lead to  
an accident and cause injuries.  
In vehicles with the LongLife system in  
Check the date of the current service on the  
infotainment system  
which the battery has been disconnected  
for a long period of time, it is not possible to  
calculate the date of the next service.  
Therefore the service interval display may  
not be correct. In this case, bear in mind  
the maximum service intervals permitted  
Never use the menus on the instrument  
panel display while the vehicle is in motion.  
Press Settings.  
Select the Data connection menu option  
to display information about services.  
Note  
After loading or changing the 12-volt bat-  
tery, check the system settings. If the pow-  
er supply is interrupted, the system settings  
might be incorrect or deleted.  
Checking the date on the digital instrument  
panel  
page 350.  
›››  
If you reset the display manually, the next  
The date of the service can only be read  
service interval will be indicated as in vehi-  
cles with fixed service intervals. For this  
reason we recommend that the service in-  
terval display be reset by an authorised  
dealer.  
through the Service menu page 69 .  
›››  
Resetting service interval display  
If the service was not carried out by a speci-  
alised CUPRA dealer or any dealer in the  
SEAT network, the display can be reset as  
follows:  
80  
Instruments and warning/control lamps  
a few seconds until the menu or the informa-  
tive display opens automatically.  
Operation using the multifunc-  
tion steering wheel  
Button for the driver assistance  
systems  
Changing menu settings  
In the menu displayed, turn the right  
thumbwheel of the multifunction steering  
wheel Fig. 60 until the desired option of  
›››  
the menu is highlighted. The option appears  
framed.  
Press the button  Fig. 60 to make the  
›››  
required modifications. A mark indicates that  
the system or function is activated.  
Fig. 61 On the turn signal and main beam  
lever: button for driver assistance systems  
(depending on versions).  
Fig. 60 Right side of the multifunction  
steering wheel: buttons for using the in-  
strument cluster’s menus and information  
displays (depending on versions).  
Back to menu selection  
Press the button or Fig. 60 .  
›››  
As long as a priority 1 page 71 warning is  
›››  
active, it will not be possible to access any  
menu. Some warnings can be confirmed and  
hidden with the button  of the multifunc-  
tion steering wheel Fig. 60 .  
›››  
Select a menu or an informative display  
Switch the ignition on.  
If a message or vehicle symbol is displayed,  
Fig. 62 Left side of the multifunction  
steering wheel: button for driver assistance  
systems (depending on versions).  
press the button  Fig. 60 ; if necessary,  
several times.  
›››  
»
To change menus, use buttons or   
Fig. 60.  
›››  
To open the menu or the information dis-  
played, press the button  Fig. 60 or wait  
›››  
81  

Related Topics

Popular Owner Manuals