Seats and headrests
●
●
●
The headrest must lock correctly in one
Unlock the backrest page 132 .
›››
Seat functions
position.
Move the headrest upwards until it arrives
to the top.
Memory function
●
1
Press button Fig. 105
, while simulta-
›››
Removing and fitting the headr-
ests
2
neously pressing on the security hole
with
a flat screwdriver a maximum of 5 mm wide,
and remove the headrest.
●
Move the backrest until it engages properly
in Folding down and raising the rear
›››
seat backrest on page 133.
Fitting the rear headrests
Fig. 106 On the outer side of the driver's
seat: memory buttons.
To mount the external headrests, the corre-
sponding backrest must be partially folded
forward.
Memory buttons
●
●
Unlock the backrest page 132 .
›››
The memory buttons can be used to save
and turn on settings for the driver seat and
the exterior mirrors.
Fig. 105 Rear headrest: removal.
Insert the headrest bars into the guides
until they perceptibly engage. It should not
be possible to remove the headrest from the
backrest.
Removing and fitting the front headrests
●
Move the headrest upwards until it arrives
to the top.
Save the settings of the driver seat and the
exterior mirrors while driving forward
●
Move the backrest until it engages properly
●
1
Press the side button Fig. 103
and
›››
in Folding down and raising the rear
›››
●
Apply the electronic parking brake.
remove the headrest.
seat backrest on page 133.
●
●
●
Move the gearshift to the neutral position.
Switch the ignition on.
●
To refit, insert the headrest into the holes
in the backrest, pushing it down until it en-
gages.
WARNING
Adjust the driver seat and the exterior mir-
Remove the rear headrests only when it is
necessary to fit a child seat. After removing
a child seat, refit the headrest immediately.
rors.
Removing the rear headrests
●
Press for longer than 1 second
Fig. 106.
›››
●
To remove the headrest, the corresponding
backrest must be partially folded forward.
Press the memory button in which to store
»
the settings within approx. 10 seconds. A
131