Starting and Driving -> Advanced Driver Assistance Systems (ADAS) for Your Fiat 600 SUV Second Generation (2023-2026)

ADVANCED DRIVER  
ASSISTANCE  
SYSTEMS  
RECOMMENDATIONS  
(ADAS)  
178) The use of mats or pedals covers  
not approved by the Manufacturer may  
interfere with the operation of the speed  
limiter or cruise control. To avoid any risk  
of jamming the pedals ensure that the mat  
is secured correctly and never fit one mat  
on top of another.  
IMPORTANT  
174) Advanced Driver Assistance System  
(ADAS) are developed to support the  
driver and not to replace the driver's  
attention. The driver accepts full  
responsibility when driving the vehicle.  
Driving and manoeuvring aids cannot, in  
any circumstances, replace the need for  
vigilance on the part of the driver. The  
driver must comply with the Highway  
Code, must remain in control of the vehicle  
in all circumstances and must be able  
to retake control of it at all times. The  
driver must adapt the speed to climatic  
conditions, traffic and the state of the  
road. It is the driver's responsibility to  
constantly monitor traffic conditions,  
assess the distance and relative speed  
of other vehicles, and anticipate their  
manoeuvres before using the direction  
indicator and changing lanes. These  
systems do not make it possible to exceed  
the laws of physics.  
175) You should hold the steering wheel  
with both hands, always use the door and  
interior mirrors, always leave your feet  
close to the pedals and take a break every  
2 hours.  
176) The driver must always check the  
surroundings of the vehicle before and  
during the whole manoeuvre, in particular  
using the mirrors.  
174) 175) 176) 177) 178)  
56) 57) 58) 59) 60)  
WARNING  
56) The operation of the radar(s), along  
with any associated functions, may be  
affected by the accumulation of dirt (e.g.  
mud, ice), in poor weather conditions (e.g.  
heavy rain, snow), or if the bumpers are  
damaged. If the front bumper is to be  
repainted, contact a Fiat Dealership;  
certain types of paint could interfere with  
the operation of the radar(s).  
57) This camera and its associated  
functions may be impaired or not work if  
the windscreen area in front of the camera  
is dirty, misty, frosty, covered with snow,  
damaged or masked by a sticker. In humid  
and cold weather, demist the windscreen  
regularly. Poor visibility (inadequate street  
lighting, heavy rain, thick fog, snowfall),  
dazzle (headlamps of an oncoming  
vehicle, low sun, reflections on a damp  
road, leaving a tunnel, alternating shade  
and light) can also impair detection  
performance. In the event of a windscreen  
replacement, contact a Fiat Dealership  
to recalibrate the camera; otherwise, the  
operation of the associated driving aids  
may be disrupted.  
177  
F6S0061  
NOTE Ensure that the units of speed  
displayed in the instrument panel (mph  
or km/h) are those for the country you  
are driving in. If this is not the case,  
when the vehicle is stationary, set  
the display to the required units of  
speed so that it complies with what is  
authorised locally. In case of doubt,  
contact a Fiat Dealership.  
177) The usage of a license plate support  
on the front bumper may affect the proper  
radar unit functionality. When using a  
license plate support, follow the markings  
and indications on the front bumper  
58) The images from the camera(s)  
displayed on the touch screen or on the  
instrument panel may be distorted by  
150  
empty symbol: the function is  
deleted from the shortcuts  
check the modification in the  
"Shortcuts" tab.  
SHORTCUTS FOR  
ADVANCED DRIVER  
ASSISTANCE  
the terrain. In the presence of areas in  
shade, or in conditions of bright sunlight  
or inadequate lighting, the image may  
be darkened and with lower contrast.  
Obstacles may appear further away than  
they actually are.  
SYSTEMS  
QUICK DEACTIVATION  
Press and hold the Advanced Driver  
Assistance System (ADAS) button to  
deactivate the selected functions until  
next vehicle start, fig. 179.  
59) The operation of the sensors, as well  
as any associated functions, may be  
disrupted by noise pollution such as that  
emitted by noisy vehicles and machinery  
(e.g. lorries, pneumatic drills), by the  
accumulation of snow or dead leaves  
on the road or in the event of damaged  
bumpers and mirrors. When reverse gear  
is engaged, an audible signal (long beep)  
indicates that the sensors may be dirty.  
A front or rear impact to the vehicle can  
upset the sensors’ settings, which is not  
always detected by the system: distance  
measurements may be distorted. The  
sensors do not systematically detect  
obstacles that are too low (pavements,  
studs) or too thin (trees, posts, wire  
fences). Certain obstacles located in the  
sensors’ blind spots may not be detected  
or may no longer be detected during the  
manoeuvre. Certain materials (fabrics)  
absorb sound waves: pedestrians may not  
be detected.  
Advanced Driver Assistance System  
(ADAS) can be accessed directly to  
quickly activate/deactivate them.  
By default, driving aids are already  
stored in the system (e.g. Stop-Start,  
Lane Keeping Assist)  
Other driving aids can be added or  
deleted from the page.  
It is configured in the  
"ADAS">"Functions" touch screen  
application.  
press the button (1) fig. 178  
1
179  
A6S0123  
60) Clean the bumpers and door mirrors  
and the field of vision of the cameras  
regularly. When washing your vehicle at  
high pressure, direct the spray from at  
least 30 cm away from the radar, sensors  
and cameras.  
178  
F6S0014  
press the button corresponding  
to the Advanced Driver Assistance  
System concerned:  
full symbol: the function is  
added to the shortcuts  
151