STEERING-MOUNTED
CONTROLS
pressing button (4) temporarily
pauses the function
CRUISE CONTROL
(where provided)
pressing (4) or (1) OK again will
reactivate cruise control (green).
Cruise control operation is also
temporarily interrupted (pause):
by pressing the brake pedal
automatically, if the electronic
stability control (ESC) system is
triggered
182) 183)
WARNING For more information, refer
to the "Advanced Driver Assistance
Systems (ADAS) recommendations"
chapter in this section.
_
This system automatically maintains
the vehicle’s speed at the value
programmed by the driver (speed
setting), without the use of the
accelerator pedal.
by shifting to neutral or engaging
reverse gear
183
JJ000759
by using the electric parking brake
NOTE You can temporarily exceed
the speed setting by pressing the
accelerator pedal (the programmed
speed flashes). To return to the speed
setting, release the accelerator pedal
(when the set speed is reached again,
the displayed speed stops flashing).
(1) Activation of cruise control in
progress. Use the speed suggested by
the Traffic Sign Recognition
Cruise control is switched on manually.
It requires a minimum vehicle speed of
40 km/h (25 mph).
(2) Increase/Decrease the speed
setting (if cruise control activated).
Activation of cruise control in progress
(if cruise control deactivated)
With an automatic gearbox, mode D or
second gear or higher in mode M must
be engaged.
MODIFYING THE SPEED
SETTING
(3) Cruise control ON/OFF
NOTE Cruise control remains active
after changing gear on engines fitted
with Stop-Start.
(4) Switch on/pause cruise control at
the previously saved speed setting
The cruise control must be active.
To change the speed setting using the
vehicle’s current speed:
SWITCHING ON/PAUSING
Press button (3) fig. 183 to select
the cruise control mode; the function is
paused (grey)
press (2) upwards/downwards, or
press (1) OK to activate the cruise
control and save a speed setting as
soon as the vehicle speed reaches the
desired level (green)
NOTE Switching off the ignition cancels
any speed setting.
for steps of +/- 1 km/h (1 mph),
make successive short presses
upwards/ downwards on (2) to
increase/decrease.
for steps of +/- 5 km/h (5 mph),
press and hold upwards/ downwards
on (2) to increase/decrease.
154
English 