Starting and Driving -> Panoramic Camera for Your Fiat 600 SUV Second Generation (2023-2026)

SELECTING THE SYSTEM  
DESELECTING THE  
SYSTEM  
PANORAMIC  
CAMERA  
press the button (1) successively  
again until the OFF mode is displayed  
on the instrument panel  
after a few seconds, the Highway  
Driver Assist mode is deselected  
(where provided)  
The Panoramic Camera assists the  
driver when reversing by displaying a  
view of the area behind the vehicle.  
It allows views of the vehicle's  
surroundings to be displayed as a  
nearly 180° picture in the Uconnect™  
10.25"/10.25" NAV, like a bird's eye  
view.  
_
IMPORTANT  
209  
JJ000623  
211) The system assists the driver by  
acting on the steering, acceleration and  
braking within the physical limits and  
capacities of the vehicle. Certain road  
infrastructure elements or vehicles in  
the surroundings may not be properly  
seen or may be poorly interpreted by  
the camera and radar, resulting in an  
unexpected change in direction, a lack of  
steering correction and/or inappropriate  
management of acceleration or braking.  
212) 213)  
Press the button (1) fig. 209  
The system uses:  
successively until the Highway Driver  
Assist mode is displayed on the  
instrument panel  
after a few seconds, the Highway  
Driver Assist mode is selected. The  
Driving aids miniview is displayed on  
the instrument panel:  
The colour of the symbols, representing  
the steering wheel and the side lines,  
depends on the operating state of the  
system:  
210  
F6S0020  
rear view camera, mounted above  
the number platefig. 210  
ultrasonic parking sensors in the rear  
bumper  
(grey) One or more operating  
conditions is not met; the system is  
paused.  
(green) All operating conditions are  
met; the system is active.  
(orange) System malfunction.  
174  
WARNING The view from above  
doesn't show the live situation of the  
surroundings. The images shown come  
from a recording made by the rearview  
camera when driving backwards.  
The vertical lines represent the width of  
the vehicle with mirrors unfolded. The  
direction of the lines changes with the  
position of the steering wheel.  
The first horizontal line represents  
a distance of about 30 cm beyond  
the edge of vehicle's rear bumper.  
The upper horizontal lines represent  
distances of about 1 m and 2 m.  
Trajectory lane of the vehicle is shown  
in accordance with the steering angle.  
Zoom view: the rear view camera  
records the vehicle's surroundings  
during the manoeuvre in order to  
reconstruct a view from above the rear  
or the front of the vehicle in its near  
surroundings (2).Thus, the vehicle can  
be manoeuvred around obstacles  
nearby.  
ACTIVATION  
Panoramic Camera is activated when  
reverse gear is engaged.  
DEACTIVATION  
The Panoramic Camera is deactivated  
when:  
towing an electrically connected  
trailer, bicycle carrier, etc.  
the forward speed of 10 km/h is  
exceeded  
by pressing the icon "X" in the left  
upper corner of the touch screen  
211  
F6S0260  
The screen in the Uconnect™  
10.25"/10.25" NAV fig. 211 may vary  
according to the view selected by  
pressing the following icons:  
SETTINGS  
By pressing the icon , the following  
settings can be adjusted:  
Standard view: only the area behind  
the vehicle (1) is displayed in the  
screen. The vertical lines represent  
the width of the vehicle with mirrors  
unfolded. The direction of the lines  
changes with the position of the  
steering wheel.  
The first horizontal line represents  
a distance of about 30 cm beyond  
the edge of vehicle's rear bumper.  
The upper horizontal lines represent  
distances of about 1 m and 2 m.  
Auto mode: the screen is divided  
into two parts: on the right there is a  
view from above the vehicle (2) and  
on the left there is the view from the  
rear displayed (1). The parking sensors  
complete the information on the view  
from above the vehicle.  
Acoustic messages volume  
(where provided)  
Brightness (where provided)  
Contrast (where provided)  
SYSTEM LIMITATIONS  
89)  
The Panoramic Camera may not  
operate properly when:  
180° view: only the view from the  
rear is displayed fullscreen (180° view)  
The display is immediately updated  
with the type of view selected.  
surrounding is dark  
sun or beam of headlights is shining  
directly into camera lenses  
weather limits visibility, such as fog,  
rain, or snow  
camera lenses are blocked by snow,  
ice, slush, mud, dirt. Clean the lens,  
rinse with water, and wipe with a soft  
cloth  
WARNING The area displayed by the  
Panoramic Camera is limited. The  
distance of the image that appears  
on the display differs from the actual  
distance.  
175  
vehicle is towing an electrically  
connected trailer, bicycle carrier, etc.  
vehicle had a rear end accident  
there are extreme temperature  
changes  
cleaning it. Avoid using dry, rough or hard  
cloths. The camera must be washed using  
clean water, with the addition of vehicle  
shampoo if necessary. In washing stations  
which use steam or high-pressure jets,  
clean the camera quickly, keeping the  
nozzle more than 10 cm away from the  
sensors. Also, do not apply stickers to the  
camera.  
IMPORTANT  
212) The Panoramic Camera does not  
replace driver vision. Note that objects  
that are outside the camera's field of view  
and the parking assist sensors, e.g. below  
the bumper or underneath the vehicle, are  
not displayed. Do not reverse or park the  
vehicle using only the Panoramic Camera.  
Always check the surrounding of the  
vehicle before and during driving.  
CLOSE OBSTACLE  
DETECTION  
212  
F6S0021  
The system operates with ultrasonic  
parking sensors in the rear bumper.  
(where provided)  
GENERAL INFORMATION  
214) 215)  
Indication  
As soon as an obstacle gets closer to  
90) 91) 92) 93) 94) 95) 96) 97)  
the vehicle,  
telltale flashes (if  
213) Parking and other potentially  
provided) and you will hear acoustic  
warning signals coming from the  
direction where the closest obstacle  
is. The interval between the sounds  
becomes shorter as the vehicle gets  
closer to that obstacle. The sound  
becomes continuous if the obstacle  
approaches the red area.  
dangerous manoeuvres are, however,  
always the driver’s responsibility. While  
carrying out these manoeuvres, always  
make sure that no people (especially  
children) or animals are in the area  
concerned. The camera is an aid for the  
driver, but the driver must never allow  
his/her attention to lapse during potentially  
dangerous manoeuvres, even those  
executed at low speeds. Always keep a  
slow speed, so as to promptly brake in the  
case of obstacles.  
WARNING For more information, refer  
to the "Advanced Driver Assistance  
Systems (ADAS) recommendations"  
chapter in this section.  
REAR CLOSE OBSTACLE  
DETECTION (VERSIONS  
WITH 4 SENSORS)  
Via Uconnect™ 10.25"/10.25" NAV  
the sound volume can be regulated  
and it can be temporarily muted (where  
the function is provided) when an  
obstacle is detected. If the sound is  
muted, it's automatically unmuted  
during the next manoeuvre.  
The system warns the driver with  
acoustic signals and display indication  
on Uconnect™ 10.25"/10.25" NAV  
screen against potentially hazardous  
obstacles behind the vehicle while  
reverse gear is engaged.  
WARNING  
89) It is vital, for correct operation, that the  
camera is always kept clean and free from  
any mud, dirt, snow or ice. Be careful not  
to scratch or damage the camera while  
The sound volume can be regulated  
and muted (where the function is  
176