Get Starting and Driving -> Charging Guide for Fiat 600 SUV Second Generation (2023-2026)

The Sport mode is selected.

Maintaining thermal comfort in the

passenger compartment (heating, air

conditioning, demisting/defrosting).

NOTE The heating and air conditioning

systems only operate when the engine

is running. Temporarily deactivate the

corresponding system to maintain

a comfortable temperature in the

passenger compartment. For more

information, refer to the corresponding

section.

E-AUTO MODE

CHARGING

(for Hybrid versions)

(Electric versions)

The petrol engine stops when low

power or torque is required and in

stabilised conditions.

GENERAL INFORMATION

222) 223) 224)

101) 102) 103) 104) 105) 106) 107) 108)

The petrol engine is restarted by the

belt starter.

The e-Auto mode can switch off the

petrol engine in the following cases:

When the operating strategies

permit.

Vehicle speed up to 130 Km/h (80

mph).

When the driver releases the

accelerator pedal in stabilised

conditions or in deceleration.

During the stop phases.

Deactivation/Reactivation

By default, the function is activated

when the ignition is switched on.

The settings are changed via the

Driving/Vehicle touch screen menu.

The display of a message on the

instrument panel confirms the change

of state.

227

F6S0091

Restarting is only achieved by the

belt starter until the torque demand

is available, if the traction battery is

sufficiently charged. When the torque

demand is insufficient, the petrol engine

restarts.

Charging the vehicle's high-voltage

battery depends upon several factors:

high-voltage battery of the vehicle

internal onboard charger (OBC)

external charging device

Function deactivated, this indicator

lights up in the instrument panel.

You can also deactivate the function

from the Uconnect™ 10.25" display

by choosing OFF from the Stop and

Start menu.

charging cable

NOTE Using the steering wheel

paddles also causes the restarting of

petrol engine.

The charging cable connects the

vehicle's high-voltage battery with an

external charging device providing

electric power. This may be a wall box

or a public charging station.

NOTE If high traction is required, the

driver can deactivate the e-Auto mode

using the touch screen menu.

The e-Auto mode cannot switch off the

petrol engine in the following cases:

The state of charge is less than 30%

of the traction battery energy.

There is a need for vacuum brake

assist depending on the altitude.

The high-voltage battery can be

charged with direct current (DC) only.

When charging from a wall box or

an alternating current (AC) charging

station, AC has to be converted into

185

DC. This is done by the vehicle's

onboard charger. The onboard charger

(where provided) is available with 7.4

kW (single-phase) and 11 kW (3-phase)

(for versions/markets, where provided).

If the vehicle is charged at a public DC

charging station, no DC conversion is

required. The high-voltage battery can

be directly charged with DC provided

by the DC charging station.

refer to the descriptions and

figures in this supplement

228

F6S0092

The speed of charging the vehicle's

high-voltage battery depends upon the

weakest element of the charging chain.

To achieve the maximum charging

speed, charging cable and charging

device have to be attuned to each

other.

On the inside of the charging port

229

F6S0187

flap there are labels with the following

warnings and indications that must be

checked and observed when charging

the high-voltage battery.

Further charging status indicators

are located on the control box of the

"Mode 2" charging cable. See "Power

sources that can be used" chapter.

On the label, fig. 229, there are the

following symbols related to the light

(1):

Power sources for

electric charging.

Identification of

WARNING Make sure that the charging

cable used fits to the vehicle's onboard

charger.

: when the light is fixed blue the

programmable charging is active

vehicle compatibility.

Graphic symbol for

consumer information

in accordance with

EN17186:2019.

: when the light flashes green the

charging is in process

CHARGING PORT ON

THE CAR

: when the light is fixed green the

charging is complete

To access the charging port, open the

charging flap fig. 228 on the left side

by pressing the area indicated by the

arrow.

: when the light is fixed red there is a

charging fault

The symbols shown below make

it easier to recognise the correct

power source type to use when

charging your car.

Fixed white: welcome lighting when

charging port flap is opened

Other symbols on the label remind of:

Before charging, check the symbol

(where provided) inside the charging

port flap and compare it with the

risk of shock

186

symbol on the charging cable (where

provided).

CHARGING INFO ON

CLUSTER

Symbol on the cable charging

connector (car side) for Mode 2 and

Mode 3 cables and on the charging

port flap

231

F1A0725

AC (alternating current) charging at a

charging station (≤ 480 V RMS).

Symbol on the cable charging

connector (car side) for the Mode 4

cable and on the charging port flap

233

F6S0243

While charging the cluster displays the

following information:

The battery level in percentage (1)

The estimated driving range (2)

The estimated timing to reach 100%

(3)

230

F1A0717

AC (alternating current) charging in the

home or at a charging station (≤ 480 V

RMS).

The estimated driving range per hour

of recharging (4)

Symbol on the cable charging

connector (charging station side)

for the Mode 3 cable and on the

charging station

IMPORTANT

222) In order to reduce the risk of electric

shock or damage to the device, special

care should be taken when cleaning:

ALWAYS unplug the device from the

domestic power supply socket and car

ports.

232

F1A0718

DC (direct current) charging at a

charging station (50–500 V).

223) The safety and suitability of the

domestic system for charging through the

domestic mains are primary and are under

the Customer’s responsibility.

187

224) In case of impact, even light, against

the charging flap, do not use it. Do

not dismantle or modify the charging

connector - risk of electrocution and/or

fire! Contact a Fiat Dealership.

107) Charging the high-voltage battery

may take longer if the temperature of the

high-voltage battery is high or low.

108) During charging, especially with fast

charging, high-voltage battery cooling

components may be voltage activated.

Therefore, it is normal to hear noises

during this operation.

WARNING

101) Do not charge if the external

temperature is -30°C or lower, as charging

is likely to take longer and the charging

device may be damaged.

102) In cold temperatures, the charging

cable may become stiff. Therefore, be

careful not to apply excessive force to the

charging cable as it may be damaged.

103) Do not use personal generators to

charge the high-voltage battery. This may

cause fluctuations in charging and the

voltage may be insufficient, resulting in

damage to the car system.

104) Charging the high-voltage battery

using incorrect or damaged sockets, or

charging cables and not following the

prescribed charging procedures may

cause short circuits, fire and potential risk

of damage to the electrical system of the

car.

105) Avoid leaving the high-voltage battery

for several days with the charge indicator

at or near zero. The high-voltage battery

may be damaged.

POWER SOURCES

THAT CAN BE USED

235

F6S0197

A wallbox is a charging unit for private

households. It provides a charging

cable which has to be connected to

the vehicle's charging port. Some

wallboxes do not provide a charging

cable. In this case, a separate charging

cable is required which has to be

connected to both the wallbox and the

charging port of the vehicle.

225) 226) 227) 228) 229) 230) 231) 232) 233) 234) 235)

236) 237) 238) 239) 240) 241) 242) 243) 244) 245) 246)

CHARGING TYPES

There are different types of charging

the vehicle's high-voltage battery.

Charging at wallboxes

Charging time may take

approximatively:

about 16 hours 10 min with a

charging power of 3.7 kW

about 8 hours 15 min with a charging

power of 7.4 kW

about 5 hours 45 min with a charging

power of 11 kW (where provided)

234

JJ000228

106) You do not need to wait until

the high-voltage battery level is low

to recharge. The performance of the

high-voltage battery is optimal when it is

charged regularly.

Charging at charging stations

Charging stations may provide

alternating current (AC) or direct

current (DC). Charging time may vary

depending on the charging station, DC

charging stations provide the fastest

188

charging. To charge the vehicle's

battery, the charging cable of the

charging station has to be connected

to the charging port of the vehicle.

238

JJ000230

236

JJ000229

240

JJ000426

Basic domestic cables (mode 2) are

used for charging at domestic electrical

outlets. A basic domestic cable (mode

2) consists of a vehicle plug, a control

box and a plug for the domestic

electrical outlet. The control box has

an intergrated charge controller and

several LEDs indicating the charging

status.

239

F6S0199

DC charging station. Charging cable:

this allows charging from public

charging sockets marked as DC

(direct current). Up to approx. 80% of

battery capacity may be charged in

approximately:

237

F6S0198

Enhanced domestic cables (mode 2)

are similar to basic domestic cables

(mode 2). However, the charging

performance of enhanced domestic

cables (mode 2 charging) is better than

the charging performance of basic

domestic cables (mode 2).

AC charging station. Charging time

may take approximately:

if the battery is at least 20%, it takes

approximately 27 minutes with a

charging power of 100 kW

about 16 hours 10 mini with a

charging power of 3.7 kW

about 8 hours 15 min with a charging

power of 7.4 kW

about 5 hours 45 min with a charging

power of 11 kW (where provided)

"MODE 2" CHARGING

CABLE

(where provided)

1. Vehicle plug

2. Status indicators

3. Wall plug

189

socket first. For more information, refer

to the control unit handbook.

mild detergent solution, then wipe dry

with a dry cloth. Do not use abrasive

products or flammable substances

(e.g. alcohol, petrol or their derivatives).

Do not wash the device with water,

hazard of fire or electric shock with the

risk of serious injury or death.

Charge status control unit

POWER Green: electrical

connection established; charging can

begin.

Important information about

portable electric vehicle charging

Charging an electric vehicle can

stress a building's electrical system

more than a typical household

appliance.

CHARGE Flashing green:

charging in progress or temperature

pre-conditioning activated. Fixed green:

charging complete.

WARNING Only clean the device

when it is DISCONNECTED from both

the domestic charging port and the

charging port located on the car.

FAULT Red: fault; charging

Before you plug in to any electrical

outlet, have a qualified electrician

inspect and verify the electrical system

(electrical outlet, wiring, junctions and

protection devices) for heavy-duty

service at a 10 A continuous load.

Electrical outlets may wear out with

normal usage or be damaged over

time, making them unsuitable for

electric vehicle charging.

not permitted or must be stopped

immediately. Check that everything

is connected correctly and that the

electrical system is not faulty.

If the indicator lamp does not go off,

contact a Fiat Dealership.

LABEL ON THE DOMESTIC PLUG

END OF CABLE

Upon plugging the charging cable into

a domestic socket, all of the indicator

lamps come on briefly.

Refer to the handbook before

use.

Check the electrical outlet / plug

while charging and discontinue use if

the electrical outlet / plug is hot, then

have the electrical outlet serviced by a

qualified electrician.

When outdoors, plug into an

electrical outlet that is weatherproof

while in use.

If no indicator lamps come on, check

the domestic socket's circuit-breaker:

if the circuit-breaker has tripped,

contact a professional to check that the

electrical system is compatible and/or

carry out any necessary repairs

if the circuit-breaker has not tripped,

stop using the charging cable and

contact a Fiat Dealership

Mount the charging cable to reduce

strain on the electrical outlet / plug.

241

F6S0113

Manual reset procedure

Charging system/ maintenance/

cleaning

The control unit can be reset by

simultaneously disconnecting the

charging connector and the wall

socket. Then, reconnect the wall

1. Incorrect use of this charging cable

may result in fire, property damage and

serious injury or death by electrocution!

The device is maintenance-free. If

you need to clean the device, use a

soft cloth slightly dampened with a

190

2. Always use a correctly earthed

power socket, protected by a 30 mA

residual current device.

12. Only use this charging cable with

Stellantis vehicles.

IMPORTANT

13. Never plug the cable into the wall

socket (or unplug it) with wet hands.

14. Do not force the connector if it is

locked into the vehicle.

Symbol label on the rear of control

unit

225) Improper use of portable charging

cables may cause a fire, electrical shock,

or burns, and may result in damage to

property, serious injury, or death. Do not

use multi-outlet power strips, splitters,

plug adapters, grounding adaptors, surge

protectors, extension cables or similar

devices. Do not use an electrical socket

that is worn or damaged, or one that will

not hold the plug firmly in place. Do not

use an electrical socket that is on a circuit

with other electrical loads.

226) If you use electrical medical devices

(e.g., cardiac pacemakers), make sure in

advance that charging the high-voltage

battery does not affect the operation

of these devices. In some cases,

3. Always use an electrical socket

protected by a circuit-breaker

appropriate for the electrical circuit’s

current rating.

4. The weight of the control unit must

not be borne by the electrical socket,

plug and cables.

5. Never use this charging cable if it is

defective or in any way damaged.

6. Never attempt to repair or open

this charging cable. It contains no

repairable parts - replace the charging

cable if it is damaged.

7. Never immerse this charging cable in

water.

electromagnetic waves generated by the

charger may affect the operation of such

medical devices. Consult a doctor for

possible precautions.

8. Never use this charging cable with

an extension cable, a multi-plug

socket, a conversion adaptor or on a

damaged electrical socket.

227) Read all the safety warnings and

instructions before using this product.

Failure to follow the warnings and the

instructions may result in electric shock,

fire, and / or serious injury. Never leave

children unattended near the vehicle while

the vehicle is charging and never allow

children to play with the charging cable. If

the plug provided does not fit the electrical

outlet, do not modify the plug. Do not put

fingers into the electric vehicle connector.

228) There is a risk of electric shock that

may cause personal injury or death. Do

not use the charging cable if any part of

the charging cable is damaged. If the

charging cable is damaged, replace it. Do

not open or remove the charging cable

9. Do not unplug the plug from the wall

as a means of stopping charging.

10. Immediately stop charging, by

locking and then unlocking the vehicle

using the remote control key, if the

charging cable or wall socket feel

burning hot to the touch.

242

JJ000653

11. This charging cable includes

components liable to cause electrical

arcing or sparks. Do not expose to

flammable vapours.

191

personal injury or even death. Always go to

a Fiat Dealership.

244) Incorrect connection between

connector and charging terminals

constitutes a fire hazard!

245) Do not insert fingers or objects in the

cable charging connector.

246) Keep the charging flap closed when

the charging port is not in use.

cover. Service by qualified personnel only.

Connect the charging cable to a properly

grounded outlet with cables that are not

damaged.

229) Do not connect the charging cable

connector if there is dust and/or water on

the charging port. Making the connection

in the presence of water or dust on the

connector cable and the plug may cause

a fire or electric shock. Use of worn-out

electrical sockets may result in fire and

injury.

230) Stop the charge immediately if you

notice any abnormal symptoms (e.g. smell,

smoke, etc.).

231) When connecting or removing the

charging cable, be sure to grasp the

handle of the charging connector and the

charging plug. If you pull the cable directly

(without using the handle) the internal

conductors may disconnect or damage:

this may cause a shock or fire.

replace the protective covers (if present)

on both sides of the cable correctly. Avoid

prolonged exposure of the charging cable

to sunlight. Avoid dropping the charging

cable from above: violent shocks could

damage the cable. Always keep charging

connector and charging plug clean and

dry. Take care to keep the charging cable

away from water or moisture. Do not use

chemicals or solvents.

237) Position the charging cable in such a

way that it is not crushed by other cars,

trampled on by people, or positioned in

way that people in the vicinity of the car

may stumble, resulting in damage or

personal injury.

238) Disconnect the charging cable from

the domestic socket or charging station or

wallbox charging station before cleaning it.

239) Never disconnect the charging cable

from the domestic power socket or public

charging station during charging. Always

interrupt charging, then disconnect the

cable, first from the car-side charging port

and then from the domestic socket or

public charging station.

232) The charging cable is a high-voltage

conductor. Contact with high-voltage can

cause serious personal injury or death.

Similarly, do not touch the orange high-

voltage cables.

240) Never use a visibly worn or damaged

electrical socket. It could cause fire or

serious damage.

233) Do not charge when the connector

and charging plug are wet.

241) The high-voltage battery should only

be charged with the maximum allowable

current or other lower current specified in

local and national recommendations for

charging high-voltage batteries.

234) Do not charge in adverse weather

conditions (e.g. during thunderstorms) at

charging stations.

235) Be sure to use the designated

charging cable to charge the car. Using

any other charger may cause personal

injury or damage to the car.

242) The device is to be used exclusively

for charging the car.

243) Never attempt to make a repair

and/or perform maintenance on the

charge cables, this may result in serious

236) How to use the charging cables.

Treat the charging cable with care: avoid

folding and/or bending it on sharp

surfaces. After using the charging cable,

192

CHARGING SYSTEM FAILURE

State of the indicator lamp:

Off

(green)

(red) On

(green)

(red) Flashing

ꢀ

POWER

CHARGE

FAULT

Symbol

Description

Not connected to the power supply or power is not available

from the infrastructure.

The control unit is currently performing a self-test.

(green)

(red)

Connected only to the infrastructure or to the infrastructure and

to the Electric Vehicle (EV) but no charging in progress.

Connected to the power supply and to the Electric Vehicle

(EV). The EV is on charge or in a temperature preconditioning

sequence.

(green)

Connected to the power supply and to the Electric Vehicle

(EV). The EV is waiting for charging or the charging of the EV is

completed.

Control unit malfunction. No charging allowed. If an error

indicator reappears after a manual reset, the control unit must

be checked by a Fiat Dealership before the next charge.

(red)

The control unit is in diagnostic mode.

(green)

193

"MODE 3" CHARGING

CABLE

"MODE 4" CHARGING

CABLE

(where provided)

WARNING Only use DC charging

cables shorter than 30 metres.

This can be used to charge from DC

(direct current) public charging sockets.

The charging cable is connected to

the charging station. The charging

procedure can be faster than with AC

charging stations.

244

F6S0092

remove any dust that may have

243

JJ000427

accumulated on the charging

connector and charging port

remove the protective cover (1)

fig. 245

1. Vehicle plug

2. Plug for wall box / AC charging

station

PROCEDURE FOR

CHARGING FROM A

DOMESTIC POWER

SOCKET (AC)

Mode 3 charging cables are used

for charging at wall boxes and AC

charging stations. A mode 3 charging

cable provides a vehicle plug and a

plug for the wall box / AC charging

station. Wall boxes / AC charging

stations may provide an integrated

mode 3 charging cable. For more

information on the mode 3 charging

cable, refer to the manual of the

charging cable manufacturer.

CHARGING PROCEDURE

Shift the PRND command into P and

switch off the vehicle

engage the electric parking brake

take the charging kit located in the

boot

push the charging port flap on the

mark fig. 244 to release it

245

JJ000675

unroll the charging cable and

connect it from the control unit to the

domestic socket. When the connection

is made, all of the indicator lamps on

the control unit light up, then only the

194

POWER indicator lamp remains on in

green

indicator at the charging port fig. 248.

See "Charging status" paragraph for

further information.

grasp the charging connector

by the handle (1) fig. 246, remove

the protective cover and insert the

connector into the charging port

fig. 247 until you hear the click

indicating that it has been locked

If this is not the case, charging has not

started; restart the procedure, ensuring

that all of the connections are properly

established.

The red indicator lamp next to the

charging port comes on to indicate that

the connector is locked.

249

JJ000472

Once charging, the vehicle plug will be

locked to the charging port and cannot

be disconnected while charging is

1

active. indicator fig. 249 illuminates.

CANCELLING THE

CHARGING PROCESS

WARNING At public charging stations,

the cancelling and subsequent

resuming of the charging process may

cause additional costs.

246

JJ000375

248

F6S0187

Once the charging process has

started, only the driver's door can

be unlocked without cancelling the

charging process. Therefore, activate

the driver's door only function in the

vehicle personalisation.

247

JJ000470

Press on the remote control to

cancel the charging process at any

time.

The start of charging is indicated by the

the flashing of the CHARGE indicator

lamp in green on the control unit

and the green flashing of the status

195

Press twice to to cancel the

charging process at any time if the

driver's only function is activated.

the domestic electrical outlet; avoid any

entry of fluids into the charging port of the

vehicle, the vehicle plug of the charging

cable and the domestic electrical outlet.

STOP CHARGING

247)

CHARGING

PROCEDURE

FROM WALLBOX

CHARGING STATION

Before disconnecting the plug from

the charging connector: if the vehicle

is locked, unlock it; if the vehicle is

unlocked, lock it and then unlock it

fig. 250.

251

JJ000473

Shift the PRND command into P and

switch off the vehicle

engage the electric parking brake

take the charging kit located in the

boot

Disconnect the vehicle plug of the

charging cable from the charging

port fig. 251 within 30 seconds after

unlocking.

push the charging port flap on the

mark fig. 252 to release it

The end of charging is confirmed when

the green CHARGE indicator lamp on

the control unit comes on fixed and the

green light next to the charging port

come on fixed.

250

F6S0188

After disconnection, replace the

protective cover over the connector

and close the charging flap.

The red indicator lamp next to the

charging port goes out to confirm that

the connector is unlocked.

Disconnect the control unit's charging

cable from the domestic socket.

252

F6S0092

IMPORTANT

remove any dust that may have

accumulated on the charging

connector and charging port

follow the accelerated charging unit

(Wallbox) user instructions

247) After the end of the charging

progress: disconnect the charging cable

from the charging port of the vehicle; make

sure the charging port flap is closed;

always disconnect the charging cable from

196

remove the protective cover (1)

fig. 253

If this is not the case, charging has not

started; restart the procedure ensuring

that all connections are properly

established.

The red indicator lamp next to the

charging port comes on to indicate that

the connector is locked.

CANCELLING THE

CHARGING PROCESS

WARNING At public charging stations,

the cancelling and subsequent

resuming of the charging process may

cause additional costs.

255

F6S0188

The red indicator lamp next to the

charging port goes out to confirm that

the connector is unlocked.

253

JJ000675

grasp the charging connector

by the handle (1) fig. 259, remove

Once the charging process has

started, only the driver's door can

be unlocked without cancelling the

charging process. Therefore, activate

the driver's door only function in the

vehicle personalisation.

the protective cover and insert the

connector into the charging port

fig. 254 until you hear the click

indicating that it has been locked

Press on the remote control to

cancel the charging process at any

time.

Press twice to to cancel the charging

process at any time if the driver's only

function is activated.

256

JJ000473

Disconnect the vehicle plug of the

charging cable from the charging

port fig. 256 within 30 seconds after

unlocking.

STOP CHARGING

248)

254

JJ000470

Before disconnecting the plug from

the charging connector: if the vehicle

is locked, unlock it; if the vehicle is

unlocked, lock it and then unlock it

fig. 255.

The start of charging is confirmed by

the flashing of the green light next to

the charging port.

The end of charging is confirmed by

the accelerated charging unit (Wallbox)

and when the green light close to the

charging port come on fixed.

197

After disconnection, replace the

connector on to the charging unit and

close the charging flap.

take the charging kit located in the

boot

push the charging port flap on the

mark fig. 257 to release it

unroll the charging cable, grasp the

charging connector by the handle (1)

fig. 259 and insert it into the charging

port fig. 260 until you hear the click

indicating that it has been locked;

IMPORTANT

248) After the end of the charging

progress: disconnect the charging cable

from the charging port of the vehicle; make

sure the charging port flap is closed;

always disconnect the charging cable from

the domestic electrical outlet; avoid any

entry of fluids into the charging port of the

vehicle, the vehicle plug of the charging

cable and the domestic electrical outlet.

1

257

F6S0092

259

JJ000375

remove any dust that may have

accumulated on the charging

connector and charging port

remove the protective cover (1)

fig. 258 in case of AC charge and both

covers (1) and (2) in case of DC charge

CHARGING

PROCEDURE FROM

PUBLIC CHARGING

STATION (AC/DC)

When charging at a public AC charging

station / public DC charging station,

follow the instructions for the use of the

respective charging station. Public AC

charging stations may not provide an

integrated charging cable. In this case,

a portable mode 3 charging cable is

required.

260

JJ000470

charging starts automatically.

If necessary, the public charging

station must be enabled; follow the

manufacturer's instructions and

warnings when using the charging

station.

Shift the PRND command into P and

switch off the vehicle

engage the electric parking brake

258

JJ000674

198

green light next to the charging port

come on fixed.

CANCELLING THE

CHARGING PROCESS

WARNING At public charging stations,

the cancelling and subsequent

resuming of the charging process may

cause additional costs.

After disconnection, replace the

protective cover over the connector

and close the charging flap.

Disconnect the control unit's charging

cable from the domestic socket.

Once the charging process has

started, only the driver's door can

be unlocked without cancelling the

charging process. Therefore, activate

the driver's door only function in the

vehicle personalisation.

Accelerated charging via wallbox

(mode 3)

261

F6S0188

The end of charging is confirmed by

the accelerated charging unit (Wallbox)

and when the green light close to the

charging port come on fixed.

After disconnection, replace the

connector on to the charging unit and

close the charging flap.

The red indicator lamp next to the

charging port goes out to confirm that

the connector is unlocked.

Press on the remote control to

cancel the charging process at any

time.

Press twice to to cancel the charging

process at any time if the driver's only

function is activated.

IMPORTANT

STOP CHARGING

249)

249) After the end of the charging

progress: disconnect the charging cable

from the charging port of the vehicle; make

sure the charging port flap is closed;

always disconnect the charging cable from

the domestic electrical outlet; avoid any

entry of fluids into the charging port of the

vehicle, the vehicle plug of the charging

cable and the domestic electrical outlet.

Before disconnecting the plug from

the charging connector: if the vehicle

is locked, unlock it; if the vehicle is

unlocked, lock it and then unlock it

fig. 261.

262

JJ000473

Disconnect the vehicle plug of the

charging cable from the charging

port fig. 262 within 30 seconds after

unlocking.

Domestic charging (mode 2)

The end of charging is confirmed when

the green CHARGE indicator lamp on

the control unit comes on fixed and the

199

Starting and Driving -> Charging for Your Fiat 600 SUV Second Generation (2023-2026)

Related Topics

Starting and Driving

Popular Owner Manuals

Latest Owner Manuals