Get Convenience features -> Automatic climate control system Guide for Hyundai Bayon SUV Second Generation (2021-2024)

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

OAI3059101I

1. Fan speed control knob

6. Front windscreen defroster button

2. A/C (Air conditioning) button

3. Recirculation mode/Fresh mode

4. Mode selection button

5. Rear window defroster button

(if equipped)

7. OFF button

8. Temperature control knob

9. AUTO (automatic control) button

10. Climate control screen

5-61

Convenience features

• To turn the automatic operation off,

select any button of the following:

- Mode selection button

Automatic heating and air

conditioning

- Front windscreen defroster button

(Press the button one more time to

deselect the front windscreen

defroster function. The ‘AUTO’ sign

will illuminate on the information

screen once again.)

- Fan speed control toggle switch

The selected function will be con-

trolled manually whilst other functions

operate automatically.

OAI3059110I

• For your convenience, use the AUTO

button and set the temperature to

22°C (72°F).

1. Press the AUTO button.

The modes, fan speeds, air intake and

air-conditioning will be controlled auto-

matically according to the temperature

setting you select.

OAI3059112I

Information

OAI3059111I

Never place anything near the sensor

to ensure better control of the heating

and cooling system.

2. Turn the temperature control knob to

set the desired temperature. If the

temperature is set to the lowest set-

ting (Lo), the air conditioning system

will operate continuously.

5-62

3. Set the temperature control to the

Manual heating and air

conditioning

desired position.

4. Set the air intake control to fresh

mode.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn the

air conditioning system on.

7. Press the AUTO button in order to

convert to full automatic control of

the system.

The heating and cooling system can be

controlled manually by pushing buttons

other than the AUTO button. In this

case, the system works sequentially

according to the order of buttons select-

ed. When pressing any button except

the AUTO button whilst using automatic

operation, the functions not selected

will be controlled automatically.

1. Start the engine.

2. Set the mode to the desired position.

To improve the effectiveness of

heating and cooling, select the mode

according to the following:

- Heating :

- Cooling :

Mode selection

OAC3053100R

5-63

Convenience features

Floor & Defrost (A, C, D)

Most of the air flow is directed to the

floor and the windscreen with a small

amount directed to the side window

defrosters.

OAI3059113I

The mode selection button controls the

direction of the air flow through the ven-

tilation system.

The air flow outlet direction is cycled as

follows:

OAI3059114I

Defrost-Level (A, D)

Most of the air flow is directed to the

windscreen with a small amount of air

directed to the side window defrosters.

Face-Level (B, D)

Air flow is directed toward the upper

body and face. Additionally, each outlet

can be controlled to direct the air dis-

charged from the outlet.

Bi-Level (B, C, D)

Air flow is directed towards the face and

the floor.

OAC3053103R

Instrument panel vents

Floor-Level (A, C, D)

The instrument panel vent air flow can

be directed up/down or left/right using

the vent adjustment lever.

To close the vent adjustment lever,

rotate it to the outer side till the end. To

open the vent, rotate it to the inner side.

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windscreen and

side window defrosters.

5-64

Temperature control

Air intake control

OAI3059111I

OAI3059106I

The temperature will increase by turn-

ing the knob to the right.

This is used to select the outside (fresh)

air position or recirculated air position.

The temperature will decrease by turn-

ing the knob to the left.

To change the air intake control posi-

tion, push the control button.

The temperature will increase or

decrease by 0.5°C (1°F) for each incre-

mental location. When set to the lowest

temperature setting, the air conditioning

will operate continuously.

Recirculated air position

With the recirculated air

position selected, air from

the passenger compart-

ment will be drawn

through the heating sys-

tem and heated or cooled

according to the function

selected.

Temperature conversion

If the battery has been discharged or

disconnected, the temperature mode

display will reset to Centigrade.

To change the temperature unit from °C

to °F or °F to °C :

- Automatic climate control system

Press the AUTO button for 3 seconds

whilst pressing the OFF button.

- Instrument cluster

Outside (fresh) air position

With the outside (fresh) air

position selected, air

enters the vehicle from

outside and is heated or

cooled according to the

function selected.

Go to User Settings > Other Features

> Temperature Unit.

The temperature unit on both the clus-

ter display and the climate control

screen will change.

5-65

Convenience features

Fan speed control

Information

Operating the system primarily in

Fresh mode is recommended. Use

Recirculation mode temporarily only

when needed.

Prolonged operation of the heater in

Recirculation mode and without the

A/C ON can cause fogging of the wind-

screen.

In addition, prolonged use of the A/C

ON in Recirculation mode may result

in excessively dry, dehumidified air in

the cabin and may promote formation

of musty vent odor due to stagnant air.

OAI3059115I

Turn the knob to the right to increase

the fan speed and airflow. Turn the

knob to the left to decrease fan speed

and airflow.

WARNING

NOTICE

• Continued use of the climate con-

trol system operation in Recircula-

tion mode for a prolonged period

of time may cause drowsiness to

the occupants in the cabin. This

may lead to loss of vehicle control

which may lead to an accident.

Operating the fan speed when the

ignition switch is in the ON position

could cause the battery to discharge.

Operate the fan speed when the

engine is running.

• Continued use of the climate con-

trol system operation in Recircula-

tion mode with the A/C OFF may

allow humidity to increase inside

the cabin.

This may cause condensation to

accumulate on the windscreen and

obscure visibility.

• Do not sleep in your vehicle or

remain parked in your vehicle with

the windows up and either the

heater or the air conditioning ON

for prolonged periods of time.

Doing so may increase the levels

of carbon dioxide in the cabin

which may lead to serious injury or

death.

5-66

Air conditioning

System operation

Ventilation

1. Select the Face Level

mode.

2. Set the air intake control to fresh

mode.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Select the Floor Level

OAI3059107I

mode.

Push the A/C button to manually turn

the air conditioning system on (indica-

tor light will illuminate).

Push the button again to turn the air

conditioning system off.

2. Set the air intake control to fresh

mode.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If desired, turn the air conditioning

ON with the temperature control

knob set to heat in order to dehumid-

ify the air before it enters into the

cabin.

OFF mode

If the windscreen fogs up, select the

Floor & Defrost

Front Defrost

mode or press the

mode.

OAI3059116I

Push the OFF button of the front to turn

off the air climate control system. How-

ever, you can still operate the mode

and air intake buttons as long as the

ignition switch is in the ON position.

5-67

Convenience features

NOTICE

Operation Tips

• To keep dust or unpleasant fumes

from entering the vehicle through the

ventilation system, temporarily set

the air intake control to the recircula-

tion mode. Be sure to return the con-

trol to fresh mode position when the

irritation has passed to keep fresh air

in the vehicle. This will help keep the

driver alert and comfortable.

• To prevent interior fog on the wind-

screen, set the air intake control to

fresh mode and fan speed to the

desired position, turn on the air condi-

tioning system, and adjust the tem-

perature control to desired tempera-

ture.

• The refrigerant system should

only be serviced by trained and

certified technicians to insure

proper and safe operation.

• The refrigerant system should be

serviced in a well-ventilated place.

Information

• When using the air conditioning sys-

tem, monitor the temperature gauge

closely whilst driving up hills or in

heavy traffic when outside tempera-

tures are high. Air conditioning sys-

tem operation may cause engine

overheating. Continue to use the

blower fan but turn the air condi-

tioning system off if the temperature

gauge indicates engine overheating.

• When opening the windows in humid

weather, air conditioning may create

water droplets inside the vehicle.

Since excessive water droplets may

cause damage to electrical equip-

ment, air conditioning should only

be used with the windows closed.

Air conditioning

HYUNDAI Air Conditioning Systems

are filled with R-134a or R1234yf refrig-

erant.

1. Start the engine.

2. Push the air conditioning button.

3. Select the Face Level

mode.

4. Set the air intake control to Recircu-

lation mode temporarily to allow the

cabin to cool quickly. When the

desired temperature in the cabin is

reached, change the air intake con-

trol back to Fresh mode.

5. Adjust the fan speed control and

temperature control to maintain

maximum comfort.

5-68

Air conditioning system operation

tips

• If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time to

let the hot air inside the vehicle

escape.

System maintenance

Climate control air filter

• After sufficient cooling has been

achieved, switch back from recircula-

tion mode to fresh mode.

• To help reduce moisture inside of the

windows on rainy or humid days,

decrease the humidity inside the

vehicle by operating the air condition-

ing system with the windows and

sunroof closed.

• During air conditioning system opera-

tion, you may occasionally notice a

slight change in engine speed as the

air conditioning compressor cycles.

This is a normal system operation

characteristic.

• Use the air conditioning system every

month only for a few minutes to

ensure maximum system perfor-

mance.

• When using the air conditioning sys-

tem, you may notice clear water drip-

ping (or even puddling) on the ground

under the passenger side of the vehi-

cle. This is a normal system opera-

tion characteristic.

OIK047401L

[A] : Outside air, [B] : Recirculated air

[C] : Climate control air filter, [D] : Blower

[E] : Evaporator core, [F] : Heater core

The climate control air filter installed

behind the glove box filters the dust or

other pollutants that come into the vehi-

cle from the outside through the heating

and air conditioning system. If dust or

other pollutants accumulate in the filter

over a period of time, the air flow from

the air vents may decrease, resulting in

moisture accumulation on the inside of

the windscreen even when the outside

(fresh) air position is selected.

If this happens, we recommend that the

climate control air filter be replaced by a

HYUNDAI authorised repairer.

• If you operate the air conditioner

excessively, the difference between

the temperature of the outside air and

that of the windscreen could cause

the outer surface of the windscreen to

fog up, causing loss of visibility. In

this case, set the mode selection but-

ton to the

position and set the

fan speed control knob to the lowest

speed setting.

5-69

Convenience features

Information

WARNING

• Replace the filter according to the

Maintenance Schedule.

If the car is being driven in severe

conditions such as dusty, rough

roads, more frequent climate control

air filter inspections and changes are

required.

• When the air flow rate suddenly

decreases, we recommend that the

system be checked by a HYUNDAI

authorised repairer.

Vehicles equipped with R-134a

Since the refrigerant is

operated at very high

pressure, the air condi-

tioning system should

only be serviced by

trained and certified technicians.

All refrigerants should be reclaimed

with proper equipment.

Venting refrigerants directly to the

atmosphere is harmful to individuals

and environment. Failure to heed

these warnings can lead to serious

injuries.

Checking the amount of air con-

ditioner refrigerant and com-

pressor lubricant

When the amount of refrigerant is low,

the performance of the air conditioning

is reduced. Overfilling also has a bad

influence on the air conditioning sys-

tem.

Therefore, if abnormal operation is

found, we recommend that the system

be inspected by a HYUNDAI authorised

repairer.

WARNING

Vehicles equipped with R-1234yf

Since the refrigerant is

mildly flammable and

operated at high pres-

sure, the air conditioning

system should only be

serviced by trained and

certified technicians. It is

important that the correct

type and amount of oil

and refrigerant are used.

NOTICE

It is important that the correct type

and amount of oil and refrigerant is

used. Otherwise, damage to the

compressor and abnormal system

operation may occur. To prevent

damage, the air conditioning system

in your vehicle should only be ser-

viced by trained and certified techni-

cians.

All refrigerants should be reclaimed

with proper equipment.

Venting refrigerants directly to the

atmosphere is harmful to individuals

and environment. Failure to heed

these warnings can lead to serious

injuries.

5-70

Example

• Type A

OHYK059004

OAC3013020TU

• Type B

Air Conditioning refrigerant label

(if equipped)

You can find out which air conditioning

refrigerant is applied to your vehicle on

the label located inside of the bonnet.

OHYK059001

Each symbols and specification on the

air conditioning refrigerant label is rep-

resented as below:

1. Classification of refrigerant

2. Amount of refrigerant

3. Classification of compressor lubri-

cant

4. Caution

5. Flammable refrigerant

6. To require registered technician to

service air conditioning system

7. Service manual

5-71

Convenience features -> Automatic climate control system for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals