Get Convenience features -> Infotainment system Guide for Hyundai Bayon SUV Second Generation (2021-2024)

INFOTAINMENT SYSTEM

Antenna

Information

• If you install an aftermarket HID

headlight, your vehicle’s audio and

electronic device may malfunction.

• Prevent chemicals such as perfume,

cosmetic oil, sun cream, hand clean-

er, and air freshener from contacting

the interior parts because they may

cause damage or discolouration.

OAC3059054TU

USB port

The roof antenna receives DAB (if

equipped) and both AM and FM broad-

cast signals. Rotate the roof antenna in

a counterclockwise direction to remove

it. Rotate it in a clockwise direction to

reinstall it.

NOTICE

• Before entering a place with a low

height clearance, be sure that the

antenna is removed.

OAC3053071R

• Be sure to remove the antenna

before washing the vehicle in an

automatic car wash or it may be

damaged.

You can use an USB port to plug in an

USB.

Information

• When reinstalling your antenna, it

is important that it is fully tightened

and adjusted to the upright posi-

tion to ensure proper reception.

But it could be removed when

parking the vehicle.

When using a portable audio device

connected to the power outlet, noise

may occur during playback. If this

happens, use the power source of the

portable audio device.

NOTICE

Installation of aftermarket antenna

may result in water leakage, wind

noise, rattling & improper radio

operation. We recommend to use the

antenna available with a HYUNDAI

authorised repairer.

5-87

Convenience features

Steering wheel audio control

(if equipped)

Information

Some models do not have audio (plas-

tic blanking cover) system, and will not

supply radio main cable. Thus if you

want to insert Aftermarket audio or

OEM audio to listen radio broadcast-

ing service, we recommend to use the

Type A

feeder cable available with

HYUNDAI authorised repairer.

OAC3053065TU

OAC3053066TU

OAC3053067TU

Type B

Type C

The steering wheel audio control

switches are installed for your conve-

nience.

NOTICE

Do not operate audio remote control

buttons simultaneously.

5-88

VOLUME (

• Press the up button (+) to increase

volume.

) (1)

MODE ( ) (3)

Press the MODE button to select

RADIO/MEDIA/Bluetooth Audio, etc.

• Press the down button (-) to decrease

volume.

MUTE ( ) (4, if equipped)

• Press the button to mute the sound.

• Press the button again to activate the

sound.

SEEK/PRESET (

) (2)

If the SEEK/PRESET toggle switch is

moved up or down and held for 0.8 sec-

ond or more, it will function in the fol-

lowing modes.

Information

Detailed information for audio control

buttons are described in the following

pages in this chapter.

RADIO mode

It will function as the AUTO SEEK

select switch. It will SEEK until you

release the switch.

Audio / Video / Navigation

system (if equipped)

Detailed information for the navigation

system is described in a separately

supplied manual.

MEDIA mode

It will function as the FF/REW switch.

If the SEEK/PRESET toggle switch is

moved up or down, it will function in the

following modes.

Information

The infotainment system may change

after software updates. For more infor-

mation, refer to the manual provided

in the infotainment system and the

quick reference guide.

RADIO mode

It will function as the PRESET STA-

TION UP/DOWN switch.

MEDIA mode

It will function as the TRACK UP/

DOWN switch.

5-89

Convenience features

Bluetooth^®Wireless

Technology hands-free

(if equipped)

How vehicle radio works

FM reception

OJF045308L

OAC3053068TU

AM and FM radio signals are broadcast

from transmitter towers located around

your city. They are intercepted by the

radio antenna on your vehicle. This sig-

nal is then received by the radio and

sent to your vehicle speakers.

When a strong radio signal has reached

your vehicle, the precise engineering of

your audio system ensures the best

possible quality reproduction. However,

in some cases the signal coming to

your vehicle may not be strong and

clear.

This can be due to factors, such as the

distance from the radio station, close-

ness of other strong radio stations or

the presence of buildings, bridges or

other large obstructions in the area.

OAH2048050

You can use the phone wirelessly by using

the Bluetooth^®Wireless Technology.

(1) Call / Answer button

(2) Call end button

(3) Microphone

• Audio: For detailed information, refer

to “AUDIO” in this chapter.

• Navigation: Detailed information for

the Bluetooth^®Wireless Technology

hands-free is described in the manu-

al supplied separately.

5-90

AM (MW, LW) reception

FM radio station

OJF045309L

OJF045310L

AM broadcasts can be received at

greater distances than FM broadcasts.

This is because AM radio waves are

transmitted at low frequencies. These

long, low frequency radio waves can

follow the curvature of the earth rather

than travelling straight out into the

atmosphere. In addition, they curve

around obstructions so that they can

provide better signal coverage.

FM broadcasts are transmitted at high

frequencies and do not bend to follow

the earth’s surface. Because of this, FM

broadcasts generally begin to fade at

short distances from the station. Also,

FM signals are easily affected by build-

ings, mountains, or other obstructions.

These can result in certain listening

conditions which might lead you to

believe a problem exists with your

radio. The following conditions are nor-

mal and do not indicate radio trouble :

5-91

Convenience features

JBM004

OJF045311L

• Fading - As your vehicle moves away

from the radio station, the signal will

weaken and sound will begin to fade.

When this occurs, we suggest that

you select another stronger station.

• Flutter/Static - Weak FM signals or

large obstructions between the trans-

mitter and your radio can disturb the

signal causing static or fluttering nois-

es to occur. Reducing the treble level

may lessen this effect until the distur-

bance clears.

• Station Swapping - As a FM signal

weakens, another more powerful sig-

nal near the same frequency may

begin to play. This is because your

radio is designed to lock onto the

clearest signal. If this occurs, select

another station with a stronger signal.

• Multi-Path Cancellation - Radio sig-

nals being received from several

directions can cause distortion or flut-

tering. This can be caused by a direct

and reflected signal from the same

station, or by signals from two sta-

tions with close frequencies. If this

occurs, select another station until

the condition has passed.

5-92

Using a mobile phone or a two-

way radio

When a mobile phone is used inside

the vehicle, noise may be produced

from the audio system. This does not

mean that something is wrong with the

audio equipment. In such a case, use

the mobile phone at a place as far as

possible from the audio equipment.

NOTICE

When using a communication sys-

tem such as a mobile phone or a

radio set inside the vehicle, a sepa-

rate external antenna must be fitted.

When a mobile phone or a radio set

is used with an internal antenna

alone, it may interfere with the vehi-

cle’s electrical system and adversely

affect safe operation of the vehicle.

WARNING

Do not use a mobile phone whilst

driving. Stop at a safe location to

use a mobile phone.

5-93

Convenience features -> Infotainment system for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals