Get Convenience features -> Lighting Guide for Hyundai Bayon SUV Second Generation (2021-2024)

Convenience features

LIGHTING

Exterior lights

Lighting control

OBC3053029L

AUTO headlight (if equipped)

OBC3053081L

When the light switch is in the AUTO

position, the position light and headlight

will be turned ON or OFF automatically

depending on the amount of light out-

side the vehicle.

To operate the lights, turn the knob at

the end of the control lever to one of the

following positions:

(1) OFF (O)

Even with the AUTO light feature in

operation, it is recommended to manu-

ally turn ON the lights when driving at

night or in a fog, or when you enter dark

areas, such as tunnels and parking

facilities.

(2) AUTO light (if equipped)

(3) Position light

(4) Headlight

NOTICE

• Do not cover or spill anything on

the sensor (1) located on the

instrument panel.

• Do not clean the sensor using a

window cleaner, the cleanser may

leave a light film which could inter-

fere with sensor operation.

• If your vehicle has window tint or

other types of metallic coating on

the front windscreen, the AUTO

headlight system may not work

properly.

5-38

High beam operation

OBC3053082L

OBC3053083L

Position light (

)

The position light, license plate light

and instrument panel light are turned

ON.

To turn on the high beam headlight,

push the lever away from you.

The high beam indicator will light when

the headlight high beams are switched

on.

To turn off the high beam headlight, pull

the lever towards you. The low beams

will turn on.

WARNING

Do not use high beam when there are

other vehicles approaching you.

Using high beam could obstruct the

other driver’s vision.

OBC3053084L

Headlight (

)

The headlight, position light, license

plate light and instrument panel light

are turned ON.

Information

The ignition switch must be in the ON

position to turn on the headlight.

OBC3053085L

To flash the high beam headlight, pull

the lever towards you, then release the

lever. The high beams will remain ON

as long as you hold the lever towards

you.

5-39

Convenience features

Turn signals and lane change

signals

Front fog light (if equipped)

OBC3053073L

OBC3053086L

Fog lights are used to provide improved

visibility when visibility is poor due to

fog, rain or snow, etc.

1. Turn on the park light.

2. Move the light switch (1) to the front

fog light position.

3. To turn off the front fog light, turn the

light switch to the front fog light posi-

tion again or turn off the Parking

(Position) light

To signal a turn, push down on the

lever for a left turn or up for a right turn

in position (A). To signal a lane change,

move the turn signal lever slightly and

hold it in position (B).

The lever will return to the OFF position

when released or when the turn is com-

pleted.

If an indicator stays on and does not

flash or if it flashes abnormally, one of

the turn signal bulbs may be burned out

and will require replacement.

NOTICE

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor.

One-touch turn signal function

To activate a one-touch turn signal

function, move the turn signal lever

slightly and then release it. The lane

change signals will blink 3, 5 or 7 times.

You can activate or deactivate the One

Touch Turn Signal function or choose

the number of blinks (3, 5, or 7) from

the User Settings Mode on the cluster

display. For more details, refer to

“Cluster Display Modes” in chapter

5-40

Rear fog light (if equipped)

Battery saver function

The purpose of this feature is to prevent

the battery from being discharged. The

system automatically turns off the posi-

tion light when the driver turns the

engine off and opens the driver-side

door.

With this feature, the position lights will

turn off automatically if the driver parks

on the side of road at night.

However, the position lights stay ON

even when the driver-side door is

opened if the headlight switch is turned

to the position light or AUTO (if

equipped) position after the engine is

turned off.

If necessary, to keep the lights on turn

the position lights OFF and ON again

using the headlight switch on the steer-

ing column after the engine is turned

off.

OBC3053073L

Vehicle with front fog light

To turn on the rear fog light:

Position the light switch in the Position

light position, turn the light switch to the

front fog light position, and then turn the

light switch (1) to the rear fog light posi-

tion.

Headlight delay function

(if equipped)

If you place the ignition switch in the

ACC or LOCK/OFF position with the

headlights ON, the headlights (and/or

position lights) remain on for about 5

minutes. However, with the engine off if

the driver’s door is opened and closed,

the headlights (and/or position lights)

are turned off after 15 seconds.

OBC3053075L

The headlights (and/or position lights)

can be turned off by pressing the lock

button on the remote key or smart key

twice or turning the light switch to the

OFF or AUTO position. However, if you

turn the light switch to the AUTO posi-

tion when it is dark outside, the head-

lights will not be turned off.

Vehicle without front fog light

To turn on the rear fog light:

Position the light switch in the headlight

position, and then turn the light switch

(1) to the rear fog light position.

To turn the rear fog lights off, do one of

the following:

• Turn the light switch to the rear fog

light position again.

• When the light switch is in the Posi-

tion light position, if you turn off the

front fog light.

5-41

Convenience features

Headlight levelling device

NOTICE

If the driver exits the vehicle through

another door besides the driver

door, the battery saver function does

not operate and the headlight delay

function does not turn OFF automat-

ically.

This may cause the battery to dis-

charge. To avoid battery discharge,

turn OFF the headlights manually

from the headlight switch before

exiting the vehicle.

OAC3053028R

To adjust the headlight beam level

according to the number of the passen-

gers and loading weight in the luggage

area, turn the beam levelling switch.

The higher the number on the switch

position, the lower the headlight beam

level. Always keep the headlight beam

at the proper levelling position, or head-

lights may dazzle other road users.

Daytime running light (DRL)

(if equipped)

The Daytime Running Lights (DRL) can

make it easier for others to see the front

of your vehicle during the day, espe-

cially after dawn and before sunset.

The DRL system will turn the dedicated

light OFF when:

1. The parking brake is applied.

2. The engine is turned off.

Listed below are examples of appropri-

ate switch settings for varying loads.

For loading conditions other than those

listed, adjust the switch position to the

most similar situation.

Switch position

Loading condition

Driver only

Driver + Front pas-

senger

Full passengers

(including driver)

Full passengers

(including driver) +

Maximum permissible

Driver + Maximum

permissible loading

5-42

Low Beam Assist-Static light

(if equipped)

Interior lights

Whilst driving a corner, for greater visi-

bility and safety, either the left or right

side Low Beam Assist-Static light will

turn on automatically. The Low Beam

Assist-Static light will turn on when one

of the following conditions occur.

NOTICE

Do not use the interior lights for

extended periods when the engine is

turned off or the battery will dis-

charge.

• Vehicle speed is less than 6 mph (10

km/h) and steering wheel angle is

turned about 80 degrees with the low

beam on.

• Vehicle speed is between 6 mph (10

km/h) to 56 mph (90 km/h) and steer-

ing wheel angle is turned about 35

degrees with the low beam on.

• When the vehicle is in reverse with

one of the conditions above satisfied,

the light opposite to the direction the

steering wheel is turned will turn on.

Interior light AUTO cut

The interior lights will automatically go

off about 20 minutes after the engine is

turned off and the doors are closed. If a

door is opened, the light will go off 25

minutes after the engine is turned off. If

the doors are locked by the remote key

or smart key and the vehicle enters the

armed stage of the theft alarm system,

the lights will go off five seconds later.

5-43

Convenience features

Front Room lamp

Luggage compartment lamp

OAC3053029TU

OAC3059063TU

: The front or rear room lamp

come on when the front or rear

doors are opened if the engine

is running or not. When doors

are unlocked by the remote key

or smart key, the front and rear

lights come on for about 30 sec-

onds as long as any door is not

opened. The front and rear

room lamps go out gradually

after about 30 seconds if the

door is closed. However, if the

ignition switch is in the ON posi-

tion or all doors are locked, the

front and rear lights will turn off.

If a door is opened with the igni-

tion switch in the ACC position

or the LOCK/OFF position, the

front and rear lights stay on for

about 10 minutes.

The luggage compartment lamp comes

on when the tailgate is opened.

NOTICE

The luggage compartment comes on

as long as the tailgate lid is open. To

prevent unnecessary charging sys-

tem drain, close the tailgate lid

securely after using the tailgate.

Glove box lamp (if equipped)

: With the Front Room lamp in

this position, the front and rear

room lamps remain on at all

times.

: With the Front Room lamp in

this position the front and rear

room lamps remain off at all

times.

OAC3059030R

The glove box lamp comes on when the

glove box is opened.

The parking lights or headlights must

be ON for the glove box lamp to func-

tion.

5-44

Foot lamp

OAC3053115R

Foot lamp (A): The light turns on when

a door is opened and turns off when the

door is closed.

5-45

Convenience features -> Lighting for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals