05
• To prevent interior fog on the wind-
System operation
Ventilation
1. Select the Face Level
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
screen, set the air intake control to
fresh mode and fan speed to the
desired position, turn on the air condi-
tioning system, and adjust the tem-
perature control to desired tempera-
ture.
mode.
4. Set the fan speed control to the
desired speed.
Air conditioning
HYUNDAI Air Conditioning Systems
are filled with R-134a or R1234yf refrig-
erant.
Heating
1. Start the engine.
1. Select the Floor Level
mode.
2. Push the air conditioning button.
2. Set the air intake control to fresh
mode.
3. Select the Face Level
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If desired, turn the air conditioning
ON with the temperature control
knob set to heat in order to dehumid-
ify the air before it enters into the
cabin.
4. Set the air intake control to Recircu-
lation mode temporarily to allow the
cabin to cool quickly. When the
desired temperature in the cabin is
reached, change the air intake con-
trol back to Fresh mode.
5. Adjust the fan speed control and
temperature control to maintain
maximum comfort.
If the windscreen fogs up, select the
NOTICE
Floor & Defrost
Front Defrost
mode or press the
mode.
• The refrigerant system should
only be serviced by trained and
certified technicians to insure
proper and safe operation.
Operation Tips
• To keep dust or unpleasant fumes
from entering the vehicle through the
ventilation system, temporarily set
the air intake control to the recircula-
tion mode. Be sure to return the con-
trol to fresh mode position when the
irritation has passed to keep fresh air
in the vehicle. This will help keep the
driver alert and comfortable.
• The refrigerant system should be
serviced in a well-ventilated place.
5-57
English 
