Convenience features
EXTERIOR FEATURES
Bonnet
Opening the bonnet
OAC3059019TU
4. Pull out the stay-rod from the bon-
net.
OAC3059017R
5. Hold the bonnet opened with the
stay rod.
1. Make sure the shift lever is in N
(Neutral, for Automated manual
transmission) or first gear or R
(Reverse, for Manual transmission)
and set the parking brake.
2. Pull the release lever to unlatch the
bonnet. The bonnet should pop up
slightly.
Closing the bonnet
1. Before closing the bonnet, check the
following:
• All filler caps in engine compart-
ment must be correctly installed.
• Gloves, rags or any other combus-
tible material must be removed
from the engine compartment.
2. Return the support rod to its clip
location for preventing it from rat-
tling.
3. Lower the bonnet halfway (lifted
about 1 ft. (30 cm) from the closed
position) and push down to securely
lock in place. Then double check to
be sure the bonnet is secure.
OAC3053018TU
If the bonnet can be raised slightly, it
is not securely locked. Open it again
and close it with more force.
3. Go to the front of the vehicle, raise
the bonnet slightly, push up the sec-
ondary hood release lever (1) inside
of the bonnet centre and lift the bon-
net (2).
5-32
English 
