Emergency situations
Distributing the sealant
Checking the tyre inflation
pressure
OLMF064106
9. Immediately drive about 4-6 miles
(7-10 km or, about 10min) to evenly
distribute the sealant in the tyre.
Do not exceed a speed of 50 mph (80
km/h). If possible, do not fall below a
speed of 12 mph (20 km/h).
Whilst driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull off
of the side of the road.
OAC3079012TU
1. After driving about 4-6 miles (7-10
km or about 10 min.), stop at a safety
location.
2. Connect the filling hose (3) of the
compressor directly to the tyre valve.
3. Plug the compressor power cord into
the vehicle power outlet.
4. Adjust the tyre inflation pressure to
the recomended tyre inflation.
Call for road side service or towing.
With the ignition swithched on, pro-
ceed as follows.
- To increase the inflation pres-
sure: Switch on the compressor.
To check the current inflation pres-
sure setting, briefly switch off the
compressor.
- To reduce the inflation pressure:
Press the button (9) on the com-
pressor.
8-30
English 
