08
CAUTION
CAUTION
Securely install the sealant filling
hose to the valve. If not, sealant may
flow backward, possibly clogging
the filling hose.
Tyre pressure
Do not attempt to drive your vehicle
if the tyre pressure is below 200 kPa
(29 psi). This could result in an acci-
dent due to sudden tyre failure.
7. Switch off the compressor.
8. Detach the hoses from the sealant
bottle connector and from the tyre
valve.
Return the Tyre Mobility Kit to its stor-
age location in the vehicle.
WARNING
OAC3073013R
Carbon monoxide
5. Plug the compressor power cord (4)
into the vehicle power outlet.
Do not leave your vehicle running in
a poorly ventilated area for extended
periods of time. Carbon monoxide
poisoning and suffocation can
occur.
NOTICE
Only use the front passenger side
power outlet when connecting the
power cord.
6. With the ignition switch in the ON
position, switch on the compressor
and let it run for about 5~7 minutes
to fill the sealant up to proper pres-
sure. (refer to Tyre and Wheels,
chapter 2). The inflation pressure of
the tyre after filling is unimportant
and will be checked/corrected later.
Be careful not to overinflate the tyre
and stay away from the tyre when
filling it.
8-29
English 
