2007-2012 Nissan X Trail SUV In case of emergency User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In case of emergency for Your Nissan X Trail SUV Second Generation (2007-2012)

(317,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6 In case of emergency
Hazard indicator flasher switch
....
............................................................ 6-2
Flat tire
....
....................................................................................................... 6-2
Tire Pressure Monitoring System (TPMS) (if equipped)
....
........ 6-2
Stopping vehicle
....
............................................................................... 6-2
Preparing tools and spare tire (if equipped)
....
............................. 6-3
Blocking wheels
....
................................................................................ 6-5
Removing wheel cover (if equipped)
....
........................................... 6-6
Removing tire
....
..................................................................................... 6-6
Installing spare tire
....
......................................................................... 6-7
Stowing damaged tire and tools
....
................................................ 6-7
Jump starting
....
............................................................................................ 6-8
Push starting
....
......................................................................................... 6-10
If your vehicle overheats
....
.................................................................... 6-10
Towing your vehicle
....
............................................................................. 6-11
Towing precautions
....
..................................................................... 6-11
Towing recommended by NISSAN
....
......................................... 6-11
Condition: 'Except for China'/
(318,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-2 In case of emergency
T32A130827-1CA14978-018C-4DAF-9882-1F9A0A0A23F2
SIC2475
The hazard indicator flasher switch operates regard-
less of the ignition switch position except when the
battery is discharged.
The hazard indicator flasher is used to warn other
drivers when you have to stop or park under
emergency conditions.
When the hazard indicator flasher switch is pushed, all
turn signal lights will flash. To turn off the hazard
indicator flasher, push the hazard indicator flasher
switch again.
When an impact that could activate the supplemental
air bags is detected, the hazard warning flasher lights
blink automatically. If the hazard warning flasher switch
is pushed, the hazard warning flashers will turn off.
WARNING:
Do not turn the hazard warning flasher switch to
off until you can make sure that it is safe to do
so. Also, the hazard flasher warning may not
blink automatically depending on the force of
impact.
T32A130827-5BBC013D-2895-406E-B78D-DB3360F5A392
If you have a flat tire, follow the instructions as follows.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (if equipped)
GUID-5E0339A0-2DD1-4BAB-A41C-59B791FC2152
WARNING:
. If the low tire pressure warning light illumi-
nates while driving, avoid sudden steering
maneuvers or abrupt braking, reduce vehicle
speed, pull off the road to a safe location
and stop the vehicle as soon as possible.
Driving with under-inflated tires may perma-
nently damage the tires and increase the
likelihood of tire failure. Serious vehicle
damage could occur and may lead to an
accident and could result in serious personal
injury. Check the tire pressure for all four
tires. Adjust the tire pressure to the recom-
mended COLD tire pressure shown on the
tire placard to turn the low tire pressure
warning light off. If the light still illuminates
while driving after adjusting the tire pres-
sure, a tire may be flat. If you have a flat tire,
replace it with a spare tire (if equipped) as
soon as possible.
. When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after the 1 minute. Contact a
NISSAN dealer as soon as possible for tire
replacement and/or system resetting.
. Replac ing tires with those not originally
specified by NISSAN could affect the proper
operation of the TPMS.
The Tire Pressure Monitoring System (TPMS) monitors
tire pressure of all tires except the spare. When the low
tire pressure warning light is lit, one or more of your
tires is significantly under-inflated. If the vehicle is
being driven with low tire pressure, the TPMS will
activate and warn you of it by the low tire pressure
warning light (in the meter panel). This system will
activate only when the vehicle is driven at speeds
above 25 km/h (16 MPH).
For more details, see “Low tire pressure warning light”
(P.2-14) and “Tire Pressure Monitoring System
(TPMS)” (P.5-4).
STOPPING VEHICLE
T32A130827-40DAB509-FB3E-4FB9-8C5E-CC9C163BB1F4
WARNING:
. Be sure to apply the parking brake firmly.
. Be sure to move the shift lever to the “P”
(Park) position (Continuously V ariable
Transmission model) or the shift lever to
the “R” (Reverse) position (Manual Transmis-
sion model).
. Never change tires when the vehicle is on a
slope, ice or slippery area. This is hazardous.
. Never change tires when the oncoming
traffic is close to your vehicle. Call for
professional road assistance.
1. Safely move the vehicle off the road away from
traffic.
2. Turn on the hazard indicator flasher lights.
3. Park on a level surface.
4. Apply the parking brake.
5. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position.
HAZARD INDICATOR FLASHER
SWITCH
FLAT TIRE
Condition: 'Except for China'/
(319,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6. Turn off the engine.
7. Open the hood and set up the triangle reflector (if
equipped):
.
To warn other traffic.
.
To signal professional road assistance person-
nel that you need assistance.
8. Have all passengers get out from the vehicle and
stand in a safe place, away from other traffic and
clear of the vehicle.
PREPARING TOOLS AND SPARE TIRE (if
equipped)
GUID-0B6A7447-E1F6-4F4F-A758-E815D16305E1
JVE0162X
Type A
JVE0218X
Type B
Remove the jack, necessary tools and the spare tire
from the storage area.
In case of emergency 6-3
Condition: 'Except for China'/
(320,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-4 In case of emergency
JVE0196X
1. Remove the storage door by pressing the two
release tabs simultaneously.
2. Unhook the clip restraining the jack and tool kit,
and then remove the tool kit.
3. Loosen the jack by turning the jack lever
*
1
as
shown in the illustration.
4. Turn the bottom
*
2
of the jack 90 degrees, tilt the
top
*
3
of the jack towards you, and then remove
the jack slowly. To store the jack, perform this in
the reverse order and then tighten the jack lever so
that it does not rattle.
CAUTION:
When removing the jack, be careful that your
hands do not hit against the vehicle. Otherwise,
this could result in personal injury.
NOTE:
. When storing the jack, do not overtighten
the jack lever using a screw driver. Doing so
could cause deformation of the installation
area for the jack.
. Do not allow the jack to contact the interior
parts. Doing so could cause damage to the
vehicle.
Spare tire (Two row model)
T32A130827-A83EF95B-4E15-4412-9826-D3EDCABF1A13
JVE0164X
The spare tire is located under the luggage floor-
boards.
Remove the luggage floorboards.
Condition: 'Except for China'/
(321,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SCE0367A
Remove the clamp holding the spare tire.
Spare tire (Three row model)
GUID-2B977AFD-78CE-45B8-AD6A-51FC23CEF1AF
JVE0166X
The spare tire is located under the luggage floor-
boards.
Fold the third row seats flat and then remove the
luggage floorboard
*
1
. For folding the third row
seats, see “Third row seats” (P.1-6).
Pull the strap
*
2
to raise the seat.
Remove the cover
*
3
.
SCE0367A
Remove the clamp holding the spare tire.
BLOCKING WHEELS
T32A130827-6A7B1011-550C-4358-9F60-727F236E60FB
MCE0001D
WARNING:
Be sure to block the a ppropriate wheel to
prevent the vehicle from moving, which may
cause personal injury.
Place suitable blocks
*
1
at both the front and back of
the wheel diagonally opposite the flat tire
*
A
to
prevent the vehicle from moving when it is jacked up.
In case of emergency 6-5
Condition: 'Except for China'/
(322,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-6 In case of emergency
REMOVING WHEEL COVER (if equipped)
GUID-3674401C-151D-43A1-9DF6-72964288CB88
SCE0630
WARNING:
Never use your hands to remove the wheel
cover. This may cause personal injury.
To remove the wheel cover, use the jack rod
*
1
as
illustrated.
Apply cloth
*
2
between the wheel and jack rod to
prevent damaging the wheel and wheel cover.
REMOVING TIRE
T32A130827-A4847D33-094A-426F-AC3E-6A473AA5D740
JVE0165X
Jack-up points
Jacking up vehicle
T32A130827-DBAE999F-CE6C-44E9-9569-9ED9514CF77B
SCE0574
WARNING:
. Be sure to read and follow the instructions in
this section.
. DO NOT GET UNDER A VEHICLE THAT IS
SUPPORTED BY A JACK.
. Never use a jack which is not provided with
your vehicle.
. The jack, which is provided with your vehicle,
is designed only to lift your vehicle during a
tire change. Do not use the jack provided
with your vehicle on other vehicles.
. Never jack up the vehicle at a location other
than the jack-up point that is specified.
. Never lift the vehicle more than necessary.
. Never use blocks on or under the jack.
. Never star t or run the engine whi le the
vehicle is on the jack. The vehicle may move
suddenly, and this may cause an accident.
. Never allow passengers to remain in the
vehicle while the tire is off the ground.
. Be sure to read the caution label attached to
the jack body before using.
1. Place the jack directly under the jack-up point as
illustrated so that the top of the jack contacts the
vehicle at the jack-up point.
The jack should be placed on firm level
ground.
2. Align the jack head between the two notches
located at the jack-up point of either the front or
the rear section.
3. Fit the groove of the jack head between the
notches as shown.
4. Loosen each wheel nut, counterclockwise, one or
two turns with the wheel nut wrench.
Do not remove the wheel nuts until the tire is
off the ground.
5. Carefully raise the vehicle until the clearance
between the tire and ground is achieved.
6. To lift the vehicle, securely hold the jack lever and
rod with both hands and turn the jack lever.
Condition: 'Except for China'/
(323,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Removing tire
T32A130827-9C928725-DE13-4524-B106-43CBCA933524
1. Remove the wheel nuts.
2. Remove the damaged tire.
CAUTION:
The tire is heavy. Be sure that your feet are clear
from the tire and use gloves as necessary to
avoid injury.
INSTALLING SPARE TIRE
T32A130827-435AF232-C329-432F-8AAD-7473B8100EC2
SCE0039
WARNING:
. Never use wheel nuts which are not provided
with your vehicle. Incorrect wheel nuts or
improperly tightened wheel nuts may cause
the wheel to become loose or come off. This
could cause an accident.
. Never use oil or grease on the wheel studs
or nuts. This may cause the wheel nuts to
become loose.
. The T-type spare tire is designed for emer-
gency use only.
1. Clean any mud or dirt from the surface between
the wheel and hub.
2. Carefully put the spare tire on and tighten the
wheel nuts with your fingers. Check that all the
wheel nuts contact the wheel surface horizontally.
3. Tighten the wheel nuts alternately and evenly in
the sequence illustrated (
*
1
-
*
5
), more than 2
times with the wheel nut wrench, until they are
tight.
4. Lower the vehicle slowly until the tire touches the
ground.
5. Tighten the wheel nuts securely, with the wheel
nut wrench, in the sequence illustrated.
6. Lower the vehicle completely.
Tighten the wheel nuts to the specified torque
with a torque wrench as soon as possible.
Wheel nut tightening torque:
108 N·m (11 kg-m, 80 ft-lb)
The wheel nuts must be kept tightened to
specification at all times. It is recommended
that the wheel nuts be tightened to specification
at each lubrication interval.
WARNING:
Retighten the wheel nuts when the vehicle has
been driven for 1,000 km (600 miles) (also in
cases of a flat tire, etc.).
For models equipped with Tire Pressure
Monitoring System (TPMS)
GUID-16DE3A91-C3BF-444C-BA0B-738A18EBBE53
. After adjusting the tire pressure, the TPMS must
be reset. See “Tire Pressure Monitoring System
(TPMS)” (P.6-2), “Tire Pressure Monitoring Sys-
tem (TPMS)” (P.5-4) and “Tire Pressure Monitor-
ing System (TPMS)” (P.8-36) for details about the
resetting procedure.
. After adjusting tire pressure to the COLD tire
pressure, the display of the tire pressures (if
equipped in the vehicle information display) may
show higher pre ssure than th e COLD tire
pressure after the vehicle has been driven more
than 1.6 km (1 mile). This is because the tire
pressurizes as the tire temperature rises. This
does not indicate a system malfunction.
STOWING DAMAGED TIRE AND TOOLS
T32A130827-5EF8CC3C-3891-4896-8173-496E49108424
WARNING:
. Be sure that the tire, jack and tools used are
properly stored after use. Such items can
become dangerous projectiles in an accident
or sudden stop.
. The T-type spare tire is designed for emer-
gency use only.
1. Securely store the damaged tire, jack and tools
used in the storage area in the reverse order of
removal. (See “Preparing tools and spare tire”
(P.6-3).)
2. Replace the luggage floorboards.
3. Close the back door.
In case of emergency 6-7
Condition: 'Except for China'/
(324,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-8 In case of emergency
NOTE:
When stowing the jack and tools, bundle and
fasten them using the band included with the
tool bag, before storing them. Otherwise the
tools may contact each other and produce noise.
T32A130827-A9A95FA9-77F4-4CCA-AD10-3D185CD2C553
WARNING:
. Incorrect jump starting can lead to a battery
explosion. The battery explosion may result
in severe injury or death. It may also result in
damage to the vehicle. Be sure to follow the
instructions in this section.
. Explosive hydrogen gas is always present in
the vicinity of the battery. Keep all sparks
and flames away from the battery.
. Always wear suitable eye protection and
remove rings, bracelets, and any other jew-
elry whenever working on or near a battery.
. Never lean over the battery while jump
starting.
. Nev er allow battery fluid to come into
contact with eyes, skin, clothes or the
vehicle’s painted surfaces. Battery fluid is a
corros ive sulfur ic acid which can cause
severe burns. If the fluid comes into contact
with anything, immediately flush the con-
tacted area with plenty of water.
. Keep the battery out of the reach of children.
. The booster battery must be rated at 12
volts. Use of an incorrectly rated battery will
damage your vehicle.
. Never attempt to jump start a frozen battery.
It could explode and cause serious injury.
JVE0160X
QR25 engine model
JVE0161X
MR20 engine model
JVE0193X
R9M engine model
JUMP STARTING
Condition: 'Except for China'/
(325,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1. If the booster battery is in another vehicle
*
B
,
position the two vehicles
*
A
and
*
B
to bring the
batteries into close proximity to each other.
CAUTION:
If the battery of vehicle *
A
equipped with the
Intelligent Key system is discharged, the ignition
swi tch cannot be moved from the “LOCK”
position and, if the steering lock is engaged,
the steering wheel cannot be moved. Connect
the jumper cables to the booster vehicle
*
B
before turning or pushing the ignition switch and
disengaging the steering lock.
2. Apply the parking brake.
3. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “N” (Neutral) position.
4. Switch off all unnecessary electrical sys tems
(headlights, heater, air conditioner, etc.).
5. Place the ignition switch in the “LOCK” position.
6. Remove the vent caps, if equipped, on the battery.
7. Cover the battery with a firmly wrung out moist
cloth to reduce the hazard of an explosion.
8. Connect the jumper cables in the sequence as
illustrated (
*
1
,
*
2
,
*
3
,
*
4
).
CAUTION:
. Always connect positive + to positive + and
negative 7 to body ground, NOT to the
battery’s negative 7.
. Be sure that the jumper cables do not touch
moving parts in the engine compartment.
. Be sure that the jumper cable’s clamps do
not contact any other metal.
9. Start the engine of the booster vehicle
*
B
and let
it run for a few minutes.
10. Depress the accelerator pedal of the booster
vehicle
*
B
at about 2,000 rpm.
11. Start the engine of the jumped vehicle
*
A
in the
normal manner.
CAUTION:
Never keep the starter motor engaged for more
than 10 seconds. If the engine does not start
right away, place the ignition switch “OFF” and
wait at least 10 seconds before trying again.
12. After the engine is started, carefully disconnect
the jumper cables in the opposite sequence from
that illustrated (
*
4
,
*
3
,
*
2
,
*
1
).
13. Remove and dispose of the cloth as it may be
contaminated with corrosive acid.
14. Replace the vent caps, if removed.
NOTE:
. For model with Stop/Start System or Idling
Stop System, use the special battery that is
enhanced in regard to the charge-discharge
capacity and life performance. Avoid using a
non-special battery for the Stop/Start Sys-
tem or Idling Stop System, as this may cause
early deterioration of the battery or a mal-
function of the Stop/Start System or Idling
Stop System. For the battery, it is recom-
mended to use Genuine NISSAN parts. For
more information, contact a NISSAN dealer.
. For model with Stop/Start System or Idling
Stop System, it may take some time until
Stop/Start System or Idling Stop System
activates when the battery is replaced or the
battery terminal is discon nected for ex-
tended periods and then reconnected.
In case of emergency 6-9
Condition: 'Except for China'/
(326,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-10 In case of emergency
T32A130827-F123FE9F-EA80-4BD4-8400-0FE8D527FD22
Do not attempt to start the engine by pushing the
vehicle.
CAUTION:
. Continuously Variable Transmission (CVT)/
Manual Transmission (MT) model cannot be
started by pushing. Attempting to do so may
cause damage to the transmission.
. Three-way catalyst equipped model should
not be started by pushing. Attempting to do
so may cause damage to the three-way
catalyst.
. Never try to start the engine by towing.
When the engine starts, the forward surge
could cause the vehicle to collide with the
towing vehicle.
. Stop/Start System or Idling Stop System
equipped model cannot be started by push-
ing the vehicle.
T32A130827-0650D05A-CC67-40AA-8C96-B273BCC7A50B
WARNING:
. Never continue driving if your vehicle over-
heats. Doing so could cause a vehicle fire.
. Never open the hood if steam is coming out.
. Never remove the radiator or coolant reser-
voir cap while the engine is hot. If the
radiator or coolant reservoir cap is removed
when the engine is hot, pressurized hot
water will spurt out and possibly cause
burning, scalding or serious injury.
. If steam or coolant is coming from the
engine, stand clear of the vehicle to prevent
getting burned.
. The engine cooling fan can start at any time
when the coolant temperature exceeds pre-
set degrees.
. Be careful not to allow your hands, hair,
jewelry or clothing to come into contact with,
or to get caught in the cooling fan or drive
belts.
If your vehicle is overheating (indicated by the high
temperature indicator), or if you feel a lack of engine
power, detect unusual noise, etc., take the following
steps:
1. Safely move the vehicle off the road away from
traffic.
2. Turn on the hazard indicator flasher lights.
3. Apply the parking brake.
4. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “N” (Neutral) position.
DO NOT STOP THE ENGINE.
5. Open all the windows.
6. Turn off the air conditioner. Move the temperature
control to maximum hot and the fan control to high
speed.
7. Get out from the vehicle.
8. Visually inspect and listen for steam or coolant
escaping from the radiator before opening the
hood. Wait until no steam or coolant can be seen
before proceeding.
9. Open the engine hood.
10. Visually inspect if the cooling fan is running.
11. Visually inspect the radiator and radiator hoses for
leakage.
If the cooling fan is not running or the coolant is
leaking, stop the engine.
12. After the engine cools down, check the coolant
level in the reservoir with the engine running. Do
not open the radiator cap.
13. Add coolant to the reservoir if necessary.
Have your vehicle inspected/repaired at a NISSAN
dealer.
PUSH STARTING IF YOUR VEHICLE OVERHEATS
Condition: 'Except for China'/
(327,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-5ADBFDCE-C556-495F-8294-4EF D4BFC5099
When towing your vehicle, local regulations for towing
must be followed. Incorrect towing equipment could
damage your vehicle. To assure proper towing and to
prevent accidental damage to your vehicle, NISSAN
recommends that you have professional road assis-
tance personnel tow your vehicle. It is advisable to
have the professional road assistant carefully read the
following precautions.
TOWING PRECAUTIONS
T32A130827-7E42C152-10BF-4374-A885-0A3D89794DC3
. Be sure that the transmission, steering system,
and drivetrain are in working condition before
towing. If any units are damaged, the vehicle must
be towed using a dolly or flatbed tow truck. (Two-
Wheel Drive (2WD) model)
. NISSAN recommends that your vehicle be towed
with the driving (front) wheels off the ground.
(Two-Wheel Drive (2WD) model)
. Always attach safety chains before towing.
. Never tow Four-Wheel Drive (4WD) model with
any of the wheels on the ground as this may cause
serious and expensive damage to the drivetrain.
TOWING RECOMMENDED BY NISSAN
T32A130827-4F07BA95-CC62-4AA4-95CD-C75F7896FA0C
Towing Two-Wheel Drive (2WD) model
T32A130827-20FA02AA-F817-48A2-B25D-1D1DCBE00315
JVE0167X
2WD model
JVE0168X
2WD model
Front wheels on the ground:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
NISSAN recommends that towing dollies be used
under the front wheels when towing your vehicle or the
vehicle be placed on a flatbed tow truck as illustrated.
CAUTION:
Never tow Continuously Variable Transmission
(CVT) model with the front wheels on the
ground. Doing so will cause serious and expen-
sive damage to the drivetrain.
Manual Transmission (MT) model:
If you have to tow a MT vehicle with front wheel on the
ground, perform the following procedures.
1. Place the ignition switch in the “OFF” position.
2. Secure the steering wheel in a straight-ahead
position with rope or a similar device.
3. Move the shift lever to the “N” (Neutral) position.
4. Release the parking brake.
5. Attach the safety chains whenever towing.
Rear wheels on the ground:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Place the ignition switch in the “OFF” position.
2. Move the shift lever to the “N” (Neutral) position.
3. Release the parking brake.
4. Attach safety chains whenever towing.
All four wheels on the ground:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
NISSAN recommends that the vehicle be placed on a
flatbed tow truck as illustrated.
CAUTION:
Never tow CVT model with all four wheels on the
ground. Doing so will cause serious and expen-
sive damage to the drivetrain.
Manual Transmission (MT) model:
If you have to tow a MT vehicle with all four wheels on
the ground, perform the following procedures.
CAUTION:
. Never tow a manual transmission model
ba ckward with all four wheels on the
ground.
In case of emergency 6-11
TOWING YOUR VEHICLE
Condition: 'Except for China'/
(328,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-12 In case of emergency
1. Place the ignition switch in the “OFF” position.
2. Move the shift lever to the “N” (Neutral) position.
3. Release the parking brake.
Towing Four-Wheel Drive (4WD) model
T32A130827-693E447E-03E7-4D37-A293-4348DD8C9B5B
JVE0169X
4WD model
JVE0170X
4WD model
NISSAN recommends that towing dollies be used
under the front or rear wheels when towing your
vehicle or the vehicle be placed on a flatbed tow truck
as illustrated.
CAUTION:
Never tow 4WD with any of the wheels on the
ground. Doing so will cause serious and expen-
sive damage to the drivetrain.
Freeing trapped vehicle
GUID-12A4552C-8AF3-492C-8958-3AD857FAAFD4
WARNING:
. Never allow anyone to stand near the towing
line during the pulling operation.
. Never spin the tires at high speed. This could
cause them to explode and result in serious
injury. Parts of the vehicle could also over-
heat and be damaged.
. Do not pull the vehicle using the rear hook
(except for Europe and Indonesia). The rear
hook is not designed to pull the vehicle out
in the event that the vehicle becomes
trapped.
In the event that your vehicle’s tires become trapped in
sand, snow, or mud, and the vehicle is unable to free
itself without being pulled, use the recovery hooks.
. Use the recovery hooks only. Do not attach the
pulling device to any other part of the vehicle body.
Otherwise, the vehicle body may be damaged.
. Use the recovery hooks to free a vehicle only.
. The recovery hooks are under tremendous stress
when used to free a trapped vehicle. Always pull
the pulling device straight out from the vehicle.
Never pull on the recovery hooks at an angle.
Front:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVE0158X
Front
SCE0833
Front
*
1
Remove the hook cover from the bumper with a
suitable tool.
*
2
Securely install the recovery hook as illustrated.
(The hook is stored in the storage area.)
Make sure that the recovery hook is properly secured
in its storage area after use.
Condition: 'Except for China'/
(329,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Rear:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVE0159X
Except for Europe and Indonesia
Except for Europe and Indonesia: Do not use the rear
hook to pull the vehicle.
JVE0192X
For Europe and Indonesia
The rear hook is designed as the recovery hook.
In case of emergency 6-13
Condition: 'Except for China'/
(330,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-14 In case of emergency
MEMO
Condition: 'Except for China'/

Related Topics

Hazard indicator flasher switch Flat tire Jump starting Push starting If your vehicle overheats Towing your vehicle
Appearance and care
Cleaning exterior Cleaning interior Corrosion protection
Maintenance and do-it-yourself
Maintenance requirements General maintenance Explanation of general maintenance items Maintenance precautions Engine compartment check locations Engine cooling system Engine oil Drive belt Spark plugs (gasoline engine models) Brakes Brake fluid Clutch fluid (if equipped) Continuously Variable Transmission (CVT) fluid (if equipped) Air cleaner filter Wiper blades Window washer fluid Battery Variable voltage control system (if equipped) Fuses Lights Tires and wheels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot