2007-2012 Nissan X Trail SUV In case of emergency -> Flat tire User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In case of emergency -> Flat tire for Your Nissan X Trail SUV Second Generation (2007-2012)

(318,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-2 In case of emergency
T32A130827-1CA14978-018C-4DAF-9882-1F9A0A0A23F2
SIC2475
The hazard indicator flasher switch operates regard-
less of the ignition switch position except when the
battery is discharged.
The hazard indicator flasher is used to warn other
drivers when you have to stop or park under
emergency conditions.
When the hazard indicator flasher switch is pushed, all
turn signal lights will flash. To turn off the hazard
indicator flasher, push the hazard indicator flasher
switch again.
When an impact that could activate the supplemental
air bags is detected, the hazard warning flasher lights
blink automatically. If the hazard warning flasher switch
is pushed, the hazard warning flashers will turn off.
WARNING:
Do not turn the hazard warning flasher switch to
off until you can make sure that it is safe to do
so. Also, the hazard flasher warning may not
blink automatically depending on the force of
impact.
T32A130827-5BBC013D-2895-406E-B78D-DB3360F5A392
If you have a flat tire, follow the instructions as follows.
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (if equipped)
GUID-5E0339A0-2DD1-4BAB-A41C-59B791FC2152
WARNING:
. If the low tire pressure warning light illumi-
nates while driving, avoid sudden steering
maneuvers or abrupt braking, reduce vehicle
speed, pull off the road to a safe location
and stop the vehicle as soon as possible.
Driving with under-inflated tires may perma-
nently damage the tires and increase the
likelihood of tire failure. Serious v ehicle
damage could occur and may lead to an
accident and could result in serious personal
injury. Check the tire pressure for all four
tires. Adjust the tire pressure to the recom-
mended COLD tire pressure shown on the
tire placard to turn the low tire pressure
warning light off. If the light still illuminates
while driving after adjusting the tire pres-
sure, a tire may be flat. If you have a flat tire,
replace it with a spare tire (if equipped) as
soon as possible.
. When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after the 1 minute . Contact a
NISSAN dealer as soon as possible for tire
replacement and/or system resetting.
. Replac ing tires with those not originally
specified by NISSAN could affect the proper
operation of the TPMS.
The Tire Pressure Monitoring System (TPMS) monitors
tire pressure of all tires except the spare. When the low
tire pressure warning light is lit, one or more of your
tires is significantly under-inflated. If the vehicle is
being driven with low tire pressure, the TPMS will
activate and warn you of it by the low tire pressure
warning light (in the meter panel). This system will
activate only when the vehicle is driven at speeds
above 25 km/h (16 MPH).
For more details, see “Low tire pressure warning light”
(P.2-14) and “Tire Pressure Monitoring System
(TPMS)” (P.5-4).
STOPPING VEHICLE
T32A130827-40DAB509-FB3E-4FB9-8C5E-CC9C163BB1F4
WARNING:
. Be sure to apply the parking brake firmly.
. Be sure to move the shift lever to the “P”
(Park) position (Continuously Variable
Transmission model) or the shift lever to
the “R” (Reverse) position (Manual Transmis-
sion model).
. Never change tires when the vehicle is on a
slope, ice or slippery area. This is hazardous.
. Never change ti res when the oncoming
traffic is close to your vehicle. Call for
professional road assistance.
1. Safely move the vehicle off the road away from
traffic.
2. Turn on the hazard indicator flasher lights.
3. Park on a level surface.
4. Apply the parking brake.
5. Continuously Variable Transmission (CVT) model:
Move the shift lever to the “P” (Park) position.
Manual Transmission (MT) model: Move the shift
lever to the “R” (Reverse) position.
HAZARD INDICATOR FLASHER
SWITCH
FLAT TIRE
Condition: 'Except for China'/
(319,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6. Turn off the engine.
7. Open the hood and set up the triangle reflector (if
equipped):
.
To warn other traffic.
.
To signal professional road assistance person-
nel that you need assistance.
8. Have all passengers get out from the vehicle and
stand in a safe place, away from other traffic and
clear of the vehicle.
PREPARING TOOLS AND SPARE TIRE (if
equipped)
GUID-0B6A7447-E1F6-4F4F-A758-E815D16305E1
JVE0162X
Type A
JVE0218X
Type B
Remove the jack, necessary tools and the spare tire
from the storage area.
In case of emergency 6-3
Condition: 'Except for China'/
(320,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-4 In case of emergency
JVE0196X
1. Remove the storage door by pressing the two
release tabs simultaneously.
2. Unhook the clip restraining the jack and tool kit,
and then remove the tool kit.
3. Loosen the jack by turning the jack lever
*
1
as
shown in the illustration.
4. Turn the bottom
*
2
of the jack 90 degrees, tilt the
top
*
3
of the jack towards you, and then remove
the jack slowly. To store the jack, perform this in
the reverse order and then tighten the jack lever so
that it does not rattle.
CAUTION:
When removing the jack, be careful that your
hands do not hit against the vehicle. Otherwise,
this could result in personal injury.
NOTE:
. When storing the jack, do not overtighten
the jack lever using a screw driver. Doing so
could cause deformation of the installation
area for the jack.
. Do not allow the jack to contact the interior
parts. Doing so could cause damage to the
vehicle.
Spare tire (Two row model)
T32A130827-A83EF95B-4E15-4412-9826-D3EDCABF1A13
JVE0164X
The spare tire is located under the luggage floor-
boards.
Remove the luggage floorboards.
Condition: 'Except for China'/
(321,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SCE0367A
Remove the clamp holding the spare tire.
Spare tire (Three row model)
GUID-2B977AFD-78CE-45B8-AD6A-51FC23CEF1AF
JVE0166X
The spare tire is located under the luggage floor-
boards.
Fold the third row seats flat and then remove the
luggage floorboard
*
1
. For folding the third row
seats, see “Third row seats” (P.1-6).
Pull the strap
*
2
to raise the seat.
Remove the cover
*
3
.
SCE0367A
Remove the clamp holding the spare tire.
BLOCKING WHEELS
T32A130827-6A7B1011-550C-4358-9F60-727F236E60FB
MCE0001D
WARNING:
Be sure to block the ap pro priate wheel to
prevent the vehicle from moving, which may
cause personal injury.
Place suitable blocks
*
1
at both the front and back of
the wheel diagonally opposite the flat tire
*
A
to
prevent the vehicle from moving when it is jacked up.
In case of emergency 6-5
Condition: 'Except for China'/
(322,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
6-6 In case of emergency
REMOVING WHEEL COVER (if equipped)
GUID-3674401C-151D-43A1-9DF6-72964288CB88
SCE0630
WARNING:
Never use your hand s to remove the wheel
cover. This may cause personal injury.
To remove the wheel cover, use the jack rod
*
1
as
illustrated.
Apply cloth
*
2
between the wheel and jack rod to
prevent damaging the wheel and wheel cover.
REMOVING TIRE
T32A130827-A4847D33-094A-426F-AC3E-6A473AA5D740
JVE0165X
Jack-up points
Jacking up vehicle
T32A130827-DBAE999F-CE6C-44E9-9569-9ED9514CF77B
SCE0574
WARNING:
. Be sure to read and follow the instructions in
this section.
. DO NOT GET UNDER A VEHICLE THAT IS
SUPPORTED BY A JACK.
. Never use a jack which is not provided with
your vehicle.
. The jack, which is provided with your vehicle,
is designed only to lift your vehicle during a
tire change. Do not use the jack provided
with your vehicle on other vehicles.
. Never jack up the vehicle at a location other
than the jack-up point that is specified.
. Never lift the vehicle more than necessary.
. Never use blocks on or under the jack.
. Never start or run the engine while the
vehicle is on the jack. The vehicle may move
suddenly, and this may cause an accident.
. Never allow passengers to remain in the
vehicle while the tire is off the ground.
. Be sure to read the caution label attached to
the jack body before using.
1. Place the jack directly under the jack-up point as
illustrated so that the top of the jack contacts the
vehicle at the jack-up point.
The jack should be placed on firm level
ground.
2. Align the jack head between the two notches
located at the jack-up point of either the front or
the rear section.
3. Fit the groove of the jack head between the
notches as shown.
4. Loosen each wheel nut, counterclockwise, one or
two turns with the wheel nut wrench.
Do not remove the wheel nuts until the tire is
off the ground.
5. Carefully raise the vehicle until the clearance
between the tire and ground is achieved.
6. To lift the vehicle, securely hold the jack lever and
rod with both hands and turn the jack lever.
Condition: 'Except for China'/
(323,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Removing tire
T32A130827-9C928725-DE13-4524-B106-43CBCA933524
1. Remove the wheel nuts.
2. Remove the damaged tire.
CAUTION:
The tire is heavy. Be sure that your feet are clear
from the tire and use gloves as necessary to
avoid injury.
INSTALLING SPARE TIRE
T32A130827-435AF232-C329-432F-8AAD-7473B8100EC2
SCE0039
WARNING:
. Never use wheel nuts which are not provided
with your vehicle. Incorrect wheel nuts or
improperly tightened wheel nuts may cause
the wheel to become loose or come off. This
could cause an accident.
. Never use oil or grease on the wheel studs
or nuts. This may cause the wheel nuts to
become loose.
. The T-type spare tire is designed for emer-
gency use only.
1. Clean any mud or dirt from the surface between
the wheel and hub.
2. Carefully put the spare tire on and tighten the
wheel nuts with your fingers. Check that all the
wheel nuts contact the wheel surface horizontally.
3. Tighten the wheel nuts alternately and evenly in
the sequence illustrated (
*
1
-
*
5
), more than 2
times with the wheel nut wrench, until they are
tight.
4. Lower the vehicle slowly until the tire touches the
ground.
5. Tighten the wheel nuts securely, with the wheel
nut wrench, in the sequence illustrated.
6. Lower the vehicle completely.
Tighten the wheel nuts to the specified torque
with a torque wrench as soon as possible.
Wheel nut tightening torque:
108 N·m (11 kg-m, 80 ft-lb)
The wheel nuts must be kept tightened to
specification at all times. It is recommended
that the wheel nuts be tightened to specification
at each lubrication interval.
WARNING:
Retighten the wheel nuts when the vehicle has
been driven for 1,000 km (600 miles) (also in
cases of a flat tire, etc.).
For models equipped with Tire Pressure
Monitoring System (TPMS)
GUID-16DE3A91-C3BF-444C-BA0B-738A18EBBE53
. After adjusting the tire pressure, the TPMS must
be reset. See “Tire Pressure Monitoring System
(TPMS)” (P.6-2), “Tire Pressure Monitoring Sys-
tem (TPMS)” (P.5-4) and “Tire Pressure Monitor-
ing System (TPMS)” (P.8-36) for details about the
resetting procedure.
. After adjusting tire pressure to the COLD tire
pressure, the display of the tire pressures (if
equipped in the vehicle information display) may
show higher pre ssure than th e COLD tire
pressure after the vehicle has been driven more
than 1.6 km (1 mile). This is because the tire
pressurizes as the tire temperature rises. This
does not indicate a system malfunction.
STOWING DAMAGED TIRE AND TOOLS
T32A130827-5EF8CC3C-3891-4896-8173-496E49108424
WARNING:
. Be sure that the tire, jack and tools used are
properly stored after use. Such items can
become dangerous projectiles in an accident
or sudden stop.
. The T-type spare tire is designed for emer-
gency use only.
1. Securely store the damaged tire, jack and tools
used in the storage area in the reverse order of
removal. (See “Preparing tools and spare tire”
(P.6-3).)
2. Replace the luggage floorboards.
3. Close the back door.
In case of emergency 6-7
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals