2007-2012 Nissan X Trail SUV Maintenance and do-it-yourself -> Fuses User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Fuses for Your Nissan X Trail SUV Second Generation (2007-2012)

(360,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-24 Maintenance and do-it-yourself
T32A130827-8AB0AAAB-E205-4819-9DC6-D43AB8CC9EC1
ENGINE COMPARTMENT
T32A130827-183829BC-8212-47E4-8904-A6582E9358C5
JVM0386X
CAUTION:
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electric al system or
cause a fire.
If any electrical equipment does not operate, check for
an open fuse.
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Open the engine hood.
4. Remove the air cleaner du ct. (See “Engine
compartment check locations” (P.8-5).)
5. Remove the fuse/fusible link box cover by using a
suitable tool and pushing the tab.
6. Locate the fuse that needs to be replaced.
SDI1754
7. Remove the fuse using the fuse puller located in
the passenger compartment.
8. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
JVM0444X
The holder
*
1
also contains the fuses. For checking
and/or replacing, see a NISSAN dealer.
Fusible links
T32A130827-208E32EE-667A-42F8-A3BB-B552FCE416DA
If any electrical equipment does not operate and the
fuses are in good condition, check the fusible links. If
any of these fusible links are melted, replace only with
genuine NISSAN parts.
PASSENGER COMPARTMENT
T32A130827-AE5A32D9-86A8-49E9-9B78-3857F2C7C1FE
CAUTION:
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the electrical system or
cause a fire.
If any electrical equipment does not operate, check for
an open fuse.
FUSES
Condition: 'Except for China'/
(361,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Outer side of the instrument panel
GUID-98D0498D-2955-47C0-AA09-13C3DDECAE27
JVM0387X
For all LHD model
JVM0445X
For Stop/Start System or Idling Stop System (if equipped)
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Remove the fuse box cover.
4. Locate the fuse that needs to be replaced.
5. Remove the fuse using the fuse puller
*
A
.
SDI1754
6. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
Maintenance and do-it-yourself 8-25
Condition: 'Except for China'/
(362,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-26 Maintenance and do-it-yourself
Glove box
GUID-15A32307-7137-4C89-A48B-85EC6F9F70D8
JVM0388X
RHD model
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Open the glove box and unlock the damper
*
1
.
4. Hold the glove bo x lid so that the distance
between the upper end of the lid and the
dashboard is about 5 cm (2 in), and then pull off
the hinges
*
2
located on the underside of the lid.
5. Unlock the left and right stoppers
*
3
and remove
the glove box lid.
6. Locate the fuse that needs to be replaced.
7. Remove the fuse using the fuse puller.
SDI1754
8. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
Extended storage fuse switch
GUID-4DACCDD0-02EB-4845-B9C4-BFD1EAF1C1EF
JVM0415X
Example
To reduce battery drain, the extended storage fuse
switch comes from the factory switched off. Prior to
delivery of your vehicle, the switch is pushed in
(switched on) and should always remain on.
If the extended storage fuse switch is not pushed in
(switched on), the “Shipping Mode On Push Storage
Fuse” warning may appear in the vehicle information
display. See “Vehicle information display warnings and
indicators” (P.2-28).
If any electrical equipment does not operate, remove
the extended storage fuse switch and push it in again.
NOTE:
If the extended storage fuse switch malfunc-
tions, see a NISSAN dealer.
How to remove the extended storage fuse
switch:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. To remove the extended storage fuse switch, be
sure the ignition switch is in the “OFF” or “LOCK”
position.
2. Be sure the headlight switch is in the “OFF”
position.
Condition: 'Except for China'/

Related Topics

In case of emergency
Hazard indicator flasher switch Flat tire Jump starting Push starting If your vehicle overheats Towing your vehicle
Appearance and care
Cleaning exterior Cleaning interior Corrosion protection
Maintenance and do-it-yourself
Maintenance requirements General maintenance Explanation of general maintenance items Maintenance precautions Engine compartment check locations Engine cooling system Engine oil Drive belt Spark plugs (gasoline engine models) Brakes Brake fluid Clutch fluid (if equipped) Continuously Variable Transmission (CVT) fluid (if equipped) Air cleaner filter Wiper blades Window washer fluid Battery Variable voltage control system (if equipped) Lights Tires and wheels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot