[ Edit: 2014/ 11/ 7 Model: T32-A ]
Replacing
T32A130827-42DE41B1-2781-4C58-9227-157AE89E65EF
SDI2359
Replace the wiper blades if they are worn.
Before replacing the wiper blades, the wiper should be
in the fully up position to avoid scratching the engine
hood or damaging the wiper arm. To pull up the wiper
arm, see “Wiper and washer switch” (P.2-47).
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab
*
A
, and then move
the wiper blade down the wiper arm to remove
*
1
.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm until
it clicks into place.
CAUTION:
. After wiper blade replacement, return the
wiper arm to its original position. Otherwise
the wiper arm or the engine hood may be
scratched and may cause damage when the
engine hood is opened.
. Worn wiper blades can damage the wind-
shield and impair driver vision.
REAR WINDOW WIPER BLADE
T32A130827-CB9D8342-2180-4FFF-9BDC-CF4DC13E7621
Contact a NISSAN dealer if checking or replacement
is required.
T32A130827-B990E0BD-E958-4300-AFB5-DA449BD53928
JVM0380X
WARNING:
Anti-freeze is poisonous and should be stored
carefully in marked containers out of the reach
of children.
To check the fluid level, use your finger to plug the
center hole
*
1
of the cap/tube assembly, then remove
it from the reservoir.
If there is no fluid in the tube, add fluid.
Add a washer solvent to the water for better cleaning.
In the winter season, add a windshield washer anti-
freeze. Follow the manufacturer’s instructions for the
mixture ratio.
Maintenance and do-it-yourself 8-19
WINDOW WASHER FLUID
Condition: 'Except for China'/
English 
