2007-2012 Nissan X Trail SUV Maintenance and do-it-yourself -> Lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Lights for Your Nissan X Trail SUV Second Generation (2007-2012)

(363,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3. Remove the fuse box cover.
4. Pinch the locking tabs
*
1
found on each side of
the extended storage fuse switch.
5. Pull the extended storage fuse switch straight out
from the fuse box
*
2
.
How to remove the extended storage fuse
switch:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. To remove the extended storage fuse switch, be
sure the ignition switch is in the “OFF” or “LOCK”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Remove the fuse box cover.
4. Pinch the locking tabs
*
1
found on each side of
the extended storage fuse switch.
5. Pull the extended storage fuse switch straight out
from the fuse box
*
2
.
T32A130827-A9037DC9-DD9B-4B9A-BE7E-9036F9796D86
HEADLIGHTS
T32A130827-ED0F3255-CEC5-401B-8EE0-63DB4CAAD8B3
LED headlight bulb
T32A130827-EAA65B62-0E55-490E-990B-536AFDF2EB8D
If replacement is required, contact a NISSAN dealer.
Halogen headlight bulb
T32A130827-AAC92517-09B4-4636-9E2D-83C41DBC0FCC
The halogen headlight is a semi-sealed beam type
which uses replaceable headlight (halogen) bulbs.
They can be replaced from inside the engine compart-
ment without removing the headlight assembly.
CAUTION:
High-pressure halogen gas is sealed inside the
bulb. The bulb may break if the glass envelope is
scratched or the bulb is dropped.
Low-beam:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVM0395X
1. Disconnect the battery negative cable.
2. Disconnect the electrical connector
*
1
from
the rear end of the bulb.
3. Remove the headlight bulb
*
2
by turning it
counter clockwise. Do not shake or rotate the
bulb when removing it.
4. Install the new bulb in the reverse order of
removal.
Maintenance and do-it-yourself 8-27
LIGHTS
Condition: 'Except for China'/
(364,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-28 Maintenance and do-it-yourself
High-beam:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVM0396X
1. Disconnect the battery negative cable.
2. Turn the cover
*
1
counter clockwise and
remove the cover.
3. Disconnect the electrical connector
*
2
from
the rear end of the bulb.
4. Remove the headlight bulb
*
3
by turning it
counter clockwise. Do not shake or rotate the
bulb when removing it.
5. Install the new bulb in the reverse order of
removal.
CAUTION:
. When handling the bulb, do not touch the
glass envelope.
. Use the sa me number and wattage as
originally installed:
Halogen headlight model
High beam bulb: 65W (H9)
Low beam bulb: 55W (H11)
. Do not leave the bulb out of the headlight
reflector for a long period of time as dust,
moisture and smoke may enter the headlight
body and affect the performance of the
headlight.
Aiming adjustment is not necessary if only the bulbs
are replaced. When aiming adjustment is necessary,
contact a NISSAN dealer.
Fog may temporarily form inside the lens of the exterior
lights in the rain or in a car wash. A temperature
difference between the inside and the outside of the
lens causes the fog. This is not a malfunction. If large
drops of water collect inside the lens, contact a
NISSAN dealer.
EXTERIOR LIGHTS
T32A130827-CDB84EFB-58D1-403B-9E3B-411F1E572715
Item Wattage (W)
Front turn signal light 21
Front clearance light/Daytime
running light*
LED
Front fog light (if equipped) 55
Side turn signal light* LED
Rear combination light
Turn signal 21
Stop 21
Tail light 5
Reverse light 16
Rear fog light (if equipped) 21
High-mounted stop light* LED
License plate light 5
*: See a NISSAN dealer for replacement.
Condition: 'Except for China'/
(365,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
INTERIOR LIGHTS
T32A130827-F1957544-EA31-4B98-9D49-891C8723F994
Item
Wattage (W)
Map lights
LED
Vanity mirror light
1.8
Console light
LED
Room light (if equipped)
8
Rear personal light (if equipped)
8
Luggage room light
5
Maintenance and do-it-yourself 8-29
Condition: 'Except for China'/
(366,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-30 Maintenance and do-it-yourself
LIGHT LOCATIONS
T32A130827-C58F69F9-14F3-457E-BBBC-8C6BABFB731F
JVM0383X
1. Front turn signal light
2. Headlight (high-beam)
3. Headlight (low-beam)
4. Front map light
5. Room light (if equipped)
6. Side turn signal light
7. Clearance light/Daytime running light
8. Front fog light (if equipped)
9. High-mounted stop light
10. Rear combination light (tail light, stop light, rear
turn signal light)
11. Rear personal light (if equipped)
12. Rear fog light (if equipped)
13. License plate light
14. Reverse light/Tail light
15. Luggage room light
Condition: 'Except for China'/
(367,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Replacement procedures
T32A130827-57D24B47-1FF9-4557-B091-1D11EF1DB1BE
SDI1679
: REMOVE
: INSTALL
All other lights are either type A, B, C, D, E or F. When
replacing a bulb, first remove the lens and/or cover.
JVM0397X
Front turn signal light
JVM0417X
Front fog light (if equipped)
Maintenance and do-it-yourself 8-31
Condition: 'Except for China'/
(368,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-32 Maintenance and do-it-yourself
JVM0418X
Rear combination light
JVM0424X
Reverse light/Tail light
JVM0419X
License plate light
Condition: 'Except for China'/
(369,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVM0420X
Rear fog light (if equipped)
SDI1839
Vanity mirror light
SDI1499A
Room light (if equipped)
SDI2031
Rear personal light (if equipped)
JVM0426X
Luggage room light
LEGAL REQUIREMENT TO ADJUST
HEADLIGHT BEAM
GUID-FE807A2B-15BC-4AAB-B280-06A5E1C16E30
When the vehicle is driven in a country where the
driving lane is different to your home country, affix an
opaque sticker on the headlight.
Maintenance and do-it-yourself 8-33
Condition: 'Except for China'/
(370,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-34 Maintenance and do-it-yourself
JVM0393X
Left-Hand Drive (LHD) model
Condition: 'Except for China'/
(371,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVM0394X
Right-Hand Drive (RHD) model
1. Place the ignition switch in the “OFF” position and
wait until the headlights cool down.
2. Prepare the stickers referring to the figure. Make
the stickers
*
A
that will be affixed to the surface
of the right side headl ight and the left side
headlight.
NOTE:
.
Use an opaque material that prevents the
light from passing through it.
.
Note that other transparent materials do
not work effectively.
3. Affix the sticker by aligning the corner
*
B
of the
sticker with the position of the mark
*
C
that is
located on the surface of the headlight seen from
front.
Affix the sticker as illustrated by aligning the mark
*
C
with dividing lines
*
D
and
*
E
.
NOTE:
Align the mark
*
C
with the center mark
of the headlight bulb.
Maintenance and do-it-yourself 8-35
Condition: 'Except for China'/

Related Topics

In case of emergency
Hazard indicator flasher switch Flat tire Jump starting Push starting If your vehicle overheats Towing your vehicle
Appearance and care
Cleaning exterior Cleaning interior Corrosion protection
Maintenance and do-it-yourself
Maintenance requirements General maintenance Explanation of general maintenance items Maintenance precautions Engine compartment check locations Engine cooling system Engine oil Drive belt Spark plugs (gasoline engine models) Brakes Brake fluid Clutch fluid (if equipped) Continuously Variable Transmission (CVT) fluid (if equipped) Air cleaner filter Wiper blades Window washer fluid Battery Variable voltage control system (if equipped) Fuses Tires and wheels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot