2007-2012 Nissan X Trail SUV Maintenance and do-it-yourself User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself for Your Nissan X Trail SUV Second Generation (2007-2012)

(337,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8 Maintenance and do-it-yourself
Maintenance requirements
....
.................................................................... 8-2
Scheduled maintenance
....
.................................................................. 8-2
General maintenance
....
....................................................................... 8-2
Where to go for service
....
.................................................................. 8-2
General maintenance
....
.............................................................................. 8-2
Explanation of general maintenance items
....
................................. 8-2
Maintenance precautions
....
................................................................ 8-4
Engine compartment check locations
....
................................................ 8-5
QR25DE engine model
....
................................................................... 8-6
MR20DD engine model
....
.................................................................. 8-7
R9M engine model
....
........................................................................... 8-8
Engine cooling system
....
........................................................................... 8-8
Checking engine coolant level
....
...................................................... 8-9
Changing engine coolant
....
................................................................ 8-9
Engine oil
....
................................................................................................ 8-10
Checking engine oil level
....
............................................................. 8-10
Changing engine oil and oil filter
....
............................................... 8-10
Protect environment
....
...................................................................... 8-13
Drive belt
....
................................................................................................. 8-14
Spark plugs (gasoline engine models)
....
........................................... 8-14
Iridium-tipped spark plugs
....
........................................................... 8-14
Brakes
....
...................................................................................................... 8-15
Checking parking brake
....
............................................................... 8-15
Checking foot brake pedal
....
.......................................................... 8-15
Brake booster
....
................................................................................. 8-15
Brake fluid
....
.............................................................................................. 8-16
Clutch fluid (if equipped)
....
................................................................... 8-17
Continuously Variable Transmission (CVT) fluid (if equipped)
....
.... 8-17
Air cleaner filter
....
..................................................................................... 8-17
Wiper blades
....
........................................................................................ 8-18
Windshield wiper blades
....
........................................................... 8-18
Rear window wiper blade
....
......................................................... 8-19
Window washer fluid
....
.......................................................................... 8-19
Battery
....
.................................................................................................... 8-20
Vehicle battery
....
.............................................................................. 8-20
Remote controller battery
....
.......................................................... 8-21
Intelligent Key battery
....
................................................................. 8-22
Variable voltage control system (if equipped)
....
.............................. 8-23
Fuses
....
....................................................................................................... 8-24
Engine compartment
....
................................................................... 8-24
Passenger compartment
....
............................................................ 8-24
Lights
....
...................................................................................................... 8-27
Headlights
....
..................................................................................... 8-27
Exterior lights
....
................................................................................ 8-28
Interior lights
....
................................................................................. 8-29
Light locations
....
.............................................................................. 8-30
Legal requirement to adjust headlight beam
....
........................ 8-33
Tires and wheels
....
.................................................................................. 8-36
Tire Pressure Monitoring System (TPMS) (if equipped)
....
.... 8-36
Tire inflation pressure
....
................................................................. 8-36
Types of tires
....
................................................................................ 8-36
Tire chains
....
..................................................................................... 8-36
Tire rotation
....
................................................................................... 8-37
Tire wear and damage
....
............................................................... 8-37
Tire age
....
.......................................................................................... 8-37
Changing tires and wheels
....
....................................................... 8-37
Wheel balance
....
............................................................................. 8-38
Spare tire (if equipped)
....
............................................................. 8-38
Condition: 'Except for China'/
(338,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-2 Maintenance and do-it-yourself
T32A130827-0502B887-9293-4255-B737-1A75B9EBE59B
Some day-to-day and regular maintenance is essential
to maintain your vehicle’s good mechanical condition,
as well as its emission and engine performance.
It is the owner’s responsibility to make sure that the
specified maintenance, as well as general mainte-
nance, is performed.
As the vehicle owner, you are the only one who can
ensure that your vehicle receives the proper main-
tenance care.
SCHEDULED MAINTENANCE
T32A130827-1AF9EFDF-11D3-4E79-A687-B18003567180
For your convenience, the required scheduled main-
tenance items are described and listed in a separate
Warranty Information and Maintenance booklet. You
must refer to that booklet to ensure that necessary
maintenance is performed on your vehicle at regular
intervals.
GENERAL MAINTENANCE
T32A130827-21A9ECDE-764E-448F-9627-03CACE492717
General maintenance includes those items which
should be checked during normal day-to-day operation
of the vehicle. They are essential if your vehicle is to
continue to operate properly. It is your responsibility to
perform these procedures regularly as prescribed.
Performing general maintenanc e checks requires
minimal mechanical skill and only a few genera l
automotive tools.
These checks and inspec tions can be done by
yourself, a qualified technician, or if you prefer, a
NISSAN dealer.
WHERE TO GO FOR SERVICE
T32A130827-E992BEEB-58F2-4980-B85D-7522676C7996
If maintenance service is required or your vehicle
appears to malfunction, have the systems checked and
tuned by an authorised NISSAN dealer.
T32A130827-33611883-3F4A-4D74-9C04-479B9B808DE3
During normal day-to-day operation of the vehicle,
general maintenance should be performed regularly as
prescribed in this section. If you detect any unusual
sounds, vibrations or smells, be sure to check for the
cause or have a NISSAN dealer do it promptly. In
addition, you should notify a NISSAN dealer if you think
that repairs are required.
When performing any checks or maintenance work,
closely observe “Maintenance precautions” (P.8-4).
EXPLANATION OF GENERAL MAINTE-
NANCE ITEMS
T32A130827-9E64D705-5D51-4EF3-B757-C014C6BA1081
Additional information on the following items
with “*” is found later in this section.
Outside vehicle
T32A130827-3B6990FC-07B7-4E4D-A8A2-E7502A73D704
The maintenance items listed here should be per-
formed from time to time, unless otherwise specified.
Doors and hood:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check that all doors and the hood operate smoothly as
well as the back door, trunk lid and hatch. Also make
sure that all latches lock securely. Lubricate if
necessary. Make sure that the secondary latch keeps
the hood from opening when the primary latch is
released. When driving in areas using road salt or
other corrosive materials, check lubrication frequently.
Lights*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Clean the headlights on a regular basis. Make sure that
the headlights, stop lights, tail lights, turn signal lights,
and other lights are all operating properly and installed
securely. Also check the aim of the headlights.
MAINTENANCE REQUIREMENTS GENERAL MAINTENANCE
Condition: 'Except for China'/
(339,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Tires*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the pressure with a gauge often and always
prior to long distance trips. Adjust the pressure in all
tires, including the spare, to the pressure specified.
Check carefully for damage, cuts or excessive wear.
Tire rotation*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
In the case that Two-Wheel Drive (2WD) and front &
rear tires are same size; Tires should be rotated every
10,000 km (6,000 miles).
Tires marked with directional indicators can only be
rotated between front and rear.
Make sure that the directional indicators point in the
direction of wheel rotation after the tire rotation is
completed.
In the case that Four-Wheel Drive (4WD) and front &
rear tires are same size; Tires should be rotated every
5,000 km (3,000 miles).
Tires marked with directional indicators can only be
rotated between front and rear.
Make sure that the directional indicators point in the
direction of wheel rotation after the tire rotation is
completed.
In the case that front tires are different size from rear
tires; Tires cannot be rotated.
However, the timing for tire rotation may vary according
to your driving habits and the road surface conditions.
Tire Pressure Monitoring System (TPMS) trans-
mitter components (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Replace the TPMS transmitter grommet seal, valve
core and cap when the tires are replaced due to wear
or age.
Wheel alignment and balance:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the vehicle should pull to either side while driving on
a straight and level road, or if you detect uneven or
abnormal tire wear, there may be a need for wheel
alignment. If the steering wheel or seat vibrates at
normal highway speed s , wheel balancing ma y be
needed.
Windshield:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Clean the windshield on a regular basis. Check the
windshield at least every six months for cracks or other
damage. Repair as necessary.
Wiper blades*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check for cracks or wear if not functioning correctly.
Replace as necessary.
Inside vehicle
T32A130827-92ACDC4E-987C-49DA-8D8E-20CE20E92881
The maintenance items listed here should be checked
on a regular basis, such as when performing periodic
maintenance, cleaning the vehicle, etc.
Accelerator pedal:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the pedal for smooth operation and make sure
that the pedal does not catch or require uneven effort.
Keep the floor mats away from the pedal.
Brake pedal*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the pedal for smooth operation and make sure
that it is the proper distance from the floor mat when
depressed fully. Check the brake booster function. Be
sure to keep the floor mats away from the pedal.
Parking brake*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the parking brake operation regularly. Check
that the lever (if equipped) or the pedal (if equipped)
has the proper travel. Also make sure that the vehicle is
held securely on a fairly steep hill when only the
parking brake is applied.
Seat belts:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check that all parts of the seat belt system (for
example, buckles, anchors, adjusters and retractors)
operate properly and smoothly, and are installed
securely. Check the belt webbing for cuts, fraying,
wear or damage.
Steering wheel:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check for changes in the steering condition, such as
excessive play, hard steering or strange noises.
Warning lights and chimes:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Make sure that all warning lights and chimes are
operating properly.
Windshield defogger:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check that the air comes out of the defogger outlets
properly and in good quantity when operating the
heater or air conditioner.
Windshield wiper and washer*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check that the wipers and washer operate properly
and that the wipers do not streak.
Under hood and vehicle
T32A130827-7742FF9D-6320-4F0D-86C0-408787680914
The maintenance items listed here should be checked
periodically (for example, each time you check the
engine oil or refuel).
Battery*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Except for maintenance free battery, check the fluid
level in each cell. It should be between the “UPPER”
and “LOWER” lines. Vehicles operated in h igh
temperatures or under severe conditions require
frequent checks of the battery fluid level.
Maintenance and do-it-yourself 8-3
Condition: 'Except for China'/
(340,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-4 Maintenance and do-it-yourself
Brake and clutch fluid level(s)*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
For Manual Transmission (MT) model; make sure that
the brake and clutch fluid levels are between the
“MAX” and “MIN” lines on the reservoirs.
Except for Manual Transmission (MT) model; make
sure that the brake fluid level is between the “MAX”
and “MIN” lines on the reservoir.
Coolant level*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the coolant level when the coolant is cold. Make
sure that the coolant level is between the “MAX” and
“MIN” lines on the reservoir.
Engine drive belts*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Make sure that drive belt(s) is/are not frayed, worn,
cracked or oily.
Engine oil level*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check the level after parking the vehicle (on a level
ground) and turning off the engine.
Fluid leaks:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check under the vehicle for fuel, oil, water or other fluid
leaks after the vehicle has been parked for a while.
Water dripping from the air conditioner after use is
normal. If you should notice any leaks or if fuel fumes
are evident, check for cause and have it corrected
immediately.
Window washer fluid*:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Check that there is adequate fluid in the reservoir.
MAINTENANCE PRECAUTIONS
T32A130827-106C2D29-B070-4D5F-A2F9-9FBEA180F240
When performing any inspection or maintenance work
on your vehicle, always take care to prevent serious
accidental injury to yourself or damage to the vehicle.
The following are general precautions which should be
closely observed.
WARNING:
. Park the vehicle on a level surface, apply the
parking brake securely and block the wheels
to prevent the vehicle from moving. Move
the shift lever to the “P” (Park) position
(Continuously Variable Transmission model)
or the shift lever to the “N” (Neutral) position
(Manual Transmission model).
. Be sure the ignition switch is in the “OFF” or
“LOCK” position when performing any parts
replacement or repairs.
. Do not work under the hood while th e
engine is hot. Always turn off the engine
and wait until it cools down.
. If you must work with the engine running,
keep your hands, clothing, hair and tools
away from moving fans, belts and any other
moving parts.
. It is advisable to secure or remove any loose
clothing and any jewelry, such as ri ngs,
watches, etc. before working on your vehi-
cle.
. If you must run the engine in an enclosed
space such as a garage, be sure there is
proper ventilat ion for exhaust gases to
escape.
. Never get under the vehicle while it is
supported by a jack.
. Keep smoking materials, flame and sparks
away from fuel and the battery.
. Never c onnect or disconnect either the
battery or a ny transistorized component
connector while the ignition switch is in the
“ON” position.
. On gasoline engine models with the Multi-
port Fuel Injection (MFI) system, the fuel
filter and fuel lines should be serviced by a
NISSAN dealer because the fuel lines are
under high pressure even when the engine is
turned off.
. Your vehicle is equipped with an automatic
engine cooling fan. It may come on at any
time without warning, even if the ignition
switch is in the “OFF” position and the
engine is not running. To avoid injury, always
disconnect the negative battery cable before
working near the fan.
. Always wear eye protection whenever you
work on your vehicle.
. Never leave the engine or transmission
related component harness connector dis-
connected while the ignition switch is in the
“ON” position.
. Avoid direct contact with used engine oil and
coolant. Improperly disposed engine oil,
engine coolant, and/or other vehicle fluids
can hurt the environment. Always conform to
local regulations for dis posal of vehicle
fluids.
This “8. Maintenance and do- it-yourself” section
provides instructions regarding only those items which
are relatively easy for an owner to perform.
You should be aware that incomplete or improper
Condition: 'Except for China'/
(341,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
servicing may result in operating difficulties or ex-
cessive emissions, and could affect your warranty
coverage. If in doubt about any servicing, have it
done by a NISSAN dealer.
T32A130827-A113C209-87FD-4373-810A-611E3D0BFDAF
JVM0384X
Remove the air duct if necessary.
To remove the air duct
*
A
:
1. Remove the clips
*
B
with a suitable tool.
2. Loosen the bolt
*
C
with a suitable tool.
3. Pull the air duct upward and then sideways.
To install the ai r duct, perform the installation
procedure in reverse order.
Maintenance and do-it-yourself 8-5
ENGINE COMPARTMENT CHECK
LOCATIONS
Condition: 'Except for China'/
(342,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-6 Maintenance and do-it-yourself
QR25DE ENGINE MODEL
GUID-60579DCB-DED7-4C83-9E15-6D17D2DCBE76
JVC0580X
1. Engine coolant reservoir
2. Brake fluid reservoir — RHD model
3. Engine oil filler cap
4. Brake fluid reservoir — LHD model
5. Air cleaner
6. Battery
7. Window washer fluid reservoir
8. Engine drive belts
9. Engine oil dipstick
10. Radiator cap
— Vehicle overheat
11. Fuse/fusible link box
Condition: 'Except for China'/
(343,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
MR20DD ENGINE MODEL
GUID-DAC519FA-B6D0-4F70-A137-166DA9B5D43B
JVC0592X
1. Engine coolant reservoir
2. Brake and clutch* fluid reservoir — RHD model
3. Brake and clutch* fluid reservoir — LHD model
4. Air cleaner
5. Fuse/fusible link box
6. Window washer fluid reservoir
7. Engine drive belts
8. Radiator cap
— Vehicle overheat
9. Engine oil dipstick
10. Engine oil filler cap
11. Battery
*: For Manual Transmission (MT) Model
Maintenance and do-it-yourself 8-7
Condition: 'Except for China'/
(344,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-8 Maintenance and do-it-yourself
R9M ENGINE MODEL
GUID-73E23682-0553-4D66-A576-1CF6FDE45B41
JVC0640X
1. Engine coolant reservoir
2. Brake and clutch* fluid reservoir — RHD model
3. Engine oil filler cap
4. Brake and clutch* fluid reservoir — LHD model
5. Air cleaner
6. Window washer fluid reservoir
7. Engine drive belts
8. Engine oil dipstick
9. Battery
10. Fuse/fusible link box
*: For Manual Transmission (MT) Model
T32A130827-19593050-B056-4531-8627-E20FFECA682D
WARNING:
. Never remove the radiator or coolant reser-
voir cap when the engine is hot. Serious
burns c ould be caused by high-pressure
fluid escaping from the radiator. Wait until
the engine and radiator cool down.
. Engine coolant is poisonous and should be
stored carefully in marked containers out of
the reach of children.
The engine cooling system is filled at the factory with a
high-quality, year-round, anti-freeze coolant solution.
The anti-freeze solution contains rust and corrosion
inhibitors, therefore additional cooling system additives
are not necessary.
CAUTION:
. Never use any cooling system additives such
as radiator sealer. Additives may clog the
cooling system and cause damage to the
engine, transmission and/or cooling system.
. When adding or replacing coolant, be sure
to use only Genuine NISSAN Engine Coolant
or equivalent in its quality with the proper
mixture ratio. Examples of the mixture ratio
of cool ant and water are shown in the
following table:
ENGINE COOLING SYSTEM
Condition: 'Except for China'/
(345,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Outside tem-
perature down
to
Engine coolant
(concentrated)
Demineralized
or distilled
water
8C
8F
−15 5 30%
70%
−35 −30 50%
50%
Use Genuine NISSAN Engine Coolant or equivalent in
its quality. Genuine NISSAN Engine Coolant is a pre-
mixed (mixture ratio 50%) type coolant.
The use of other types of coolant solutions may
damage the engine cooling system.
The radiator is equipped with a pressure cap. To
prevent engine damage, use only a Genuine NISSAN
radiator cap or its equivalent when replacement is
required.
CHECKING ENGINE COOLANT LEVEL
T32A130827-5C9918BA-FD7E-4C97-BD4E-184D4427F3F6
JVM0379X
QR25 and MR20 engine
JVM0438X
R9M engine
Check the coolant level in the reservoir tank when the
engine is cold. If the coolant level is below the MIN
level
*
2
, add coolant up to the MAX level
*
1
. If the
reservoir tank is empty, check the coolant level in the
radiator when the engine is cold. If there is
insufficient coolant in the radiator, fill the radiator with
coolant up to the filler opening and also add it to the
reservoir tank up to the MAX level
*
1
.
If the cooling system frequently requires cool-
ant, have it checked by a NISSAN dealer.
CHANGING ENGINE COOLANT
T32A130827-AD5DF877-1CDE-4E8A-AA98-E31DFED82EF8
Contact a NISSAN dealer if replacement is required.
Major engine cooling system repair should be per-
formed by a NISSAN dealer. The service procedures
can be found in the appropriate NISSAN Service
Manual.
Improper ser vicing can result in reduce d heater
performance and engine overheating.
WARNING:
. To avoid being scalded, never change the
coolant when the engine is hot.
. Never remove the radiator or coolant reser-
voir cap when the engine is hot. Serious
burns could be caused by high pressure fluid
escaping from the radiator.
. Avoid direct skin contact with used coolant.
If skin contact is made, wash thoroughly
with soa p or hand cl eaner as soon as
possible.
. Keep coolant out of the reach of children
and pets.
Engine coolant must be disposed of properly. Check
your local regulations.
Maintenance and do-it-yourself 8-9
Condition: 'Except for China'/
(346,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-10 Maintenance and do-it-yourself
T32A130827-7FBFDE42-D934-4EBF-A456-15EF83DB52FC
CHECKING ENGINE OIL LEVEL
T32A130827-832AD9AE-E088-46FB-B20C-ACC097451A7F
JVM0423X
QR25 and MR20 engine
JVM0435X
R9M engine
1. Park the vehicle on a level surface and apply the
parking brake.
2. Start the engine and warm it up until the engine
temperature reaches the normal operating tem-
perature (approximately 5 minutes).
3. Stop the engine.
4. Wait at least 10 minutes for the engine oil to drain
back to the oil pan.
5. Remove the dipstick and wipe it clean.
6. Reinsert the dipstick all the way.
7. Remove the dipstick and check the oil level. It
should be within the range
*
C
.
8. If the oil level is below
*
A
, remove the oil filler cap
and pour the recommended oil into the opening.
Do not overfill
*
B
.
When filling the engine oil, do not remove
the dipstick.
9. Recheck the oil level with the dipstick.
It is normal to add some oil between oil
maintenance intervals or during the break-in
period, depending on the severity of operat-
ing conditions.
CAUTION:
The oil level should be checked regularly.
Operating your vehicle with an insufficient
amount of oil can damage the engine, and such
damage is not covered by the warranty.
CHANGING ENGINE OIL AND OIL FILTER
T32A130827-17863BB7-3386-4EB2-B542-3228E21833C2
WARNING:
. Used oil must be disposed of properly. Never
pour or dump oil into the ground, canals,
rivers, etc. It should be disposed of at proper
waste facilities. NISSAN recommends hav-
ing your oil changed by a NISSAN dealer.
. Be careful not to burn yourself, as the
engine oil may be hot.
. Prolonged and repeated contact with used
engine oil may cause skin cancer.
. Avoid direct skin contact with used oil. If
contacted, wash thoroughly with soap or
hand cleaner and plenty of water as soon as
possible.
. Store used engine oil in marked containers
out of the reach of children.
Vehicle set-up
GUID-EF5792C3-0A80-4BDF-944F-8C21E6FF05DC
1. Park the vehicle on a level surface and apply the
parking brake.
2. Start the engine and warm it up until the engine
temperature reaches the normal operating tem-
perature (approximately 5 minutes).
3. Stop the engine.
4. Wait at least 10 minutes for the engine oil to drain
back to the oil pan.
5. Raise and support the vehicle using a suitable
floor jack and safety jack stands.
.
Place the safety jack stands under the vehicle
jack-up points.
.
A suitable adapter should be attached to the
jack stand saddle.
6. Remove the plastic engine undercover (if
equipped).
.
Remove the plastic clips from the undercover.
Engine oil and filter
T32A130827-6F86E2B7-D38C-4534-AFED-674BD03BA210
QR25DE and MR20DD engine:
ENGINE OIL
Condition: 'Except for China'/
(347,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVM0372X
QR25DE engine
JVM0399X
QR25DE engine
JVM0414X
MR20DD engine
Maintenance and do-it-yourself 8-11
Condition: 'Except for China'/
(348,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-12 Maintenance and do-it-yourself
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place a large drain pan under the drain plug.
2. Remove the drain plug with a wrench.
3. Remove the oil filler cap and completely drain the
oil.
If the oil filter is to be changed, remove and
replace it at this time.
CAUTION:
Waste oil must be disposed of properly. Check
your local regulations.
4. Remove the plastic cover over the oil filter location
by removing the small plastic clips as illustrated.
(For QR25DE engine)
5. Loosen the oil filter with an oil filter wrench.
6. Remove the oil filter by turning it by hand.
7. Wipe the engine oil filter mounting surface with a
clean cloth.
Be sure to remove any old gasket remaining on the
mounting surface.
8. Apply new engine oil to the gasket of the new oil
filter.
9. Screw in the oil filter until a slight resistance is felt
and then tighten an additional 2/3 of a turn to
secure the filter.
Oil filter tightening torque:
15 to 20 N·m
(1.5 to 2.0 kg-m, 11 to 15 ft-lb)
10. Clean and reinstall the drain plug and new washer.
Securely tighten the drain plug with a wrench. Do
not use excessive force.
Drain plug tightening torque:
29 to 39 N·m
(3.0 to 4.0 kg-m, 22 to 29 ft-lb)
11. Refill the recommended engine oil and quantity.
(See “Recommended Fluids/lubricants and capa-
cities” (P.9-2).)
When filling the engine oil, do not remove
the dipstick.
12. Securely install the oil filler cap.
13. Start the engine.
14. Check the drain plug for any sign of leakage.
15. Dispose of the used oil in the proper manner.
Check your local regulations.
16. Check the engine oil level according to the proper
procedure. (See “Checking engine oil level” (P.8-
10).)
R9M engine:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
Condition: 'Except for China'/
(349,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SDI2149
1 Oil filler element
2 O-ring
3 Oil filter cover
1. Place a large drain pan under the drain plug.
2. Remove the drain plug with a wrench.
3. Remove the oil filler cap and completely drain the
oil.
If the oil filter is to be changed, remove and
replace it at this time.
CAUTION:
Waste oil must be disposed of properly. Check
your local regulations.
4. Loosen the oil filter cover with a wrench.
5. Remove the engine oil filter cover then the oil filter
element.
6. Remove the rubber O-ring from the filter cover.
7. Wipe the entire oil filter cover with a clean cloth.
Be sure to remove any old O-ring remaining on the
mounting surface.
8. Apply new engine oil to the O-ring.
Install the new O-ring on the new oil filter element.
9. Insert the oil filter element into the engine oil filter
cover.
10. Screw in the oil filter cover until a slight resistance
is felt, and then tighten the filter completely.
Oil filter cover tightening torque:
25 N·m
(2.6 kg-m, 18 ft-lb)
11. Clean and reinstall the drain plug and new washer.
Securely tighten the drain plug with a wrench. Do
not use excessive force.
Drain plug tightening torque:
50 N·m
(5.1 kg-m, 36.9 ft-lb)
12. Refill the recommended engine oil and quantity.
(See “Recommended Fluids/lubricants and capa-
cities” (P.9-2).)
13. Securely install the oil filler cap.
14. Start the engine.
15. Check the drain plug for any sign of leakage.
16. Dispose of the used oil in the proper manner.
Check your local regulations.
17. Check the engine oil level according to the proper
procedure. (See “Checking engine oil level” (P.8-
10).)
After operation
T32A130827-3D1A8691-255E-47E3-9C50-DDE5E8CFBD36
1. Lower the vehicle carefully to the ground.
2. Dispose of waste oil and filter properly.
PROTECT ENVIRONMENT
T32A130827-20860574-F3E8-4014-8CD9-B62C3473024F
It is illegal to pollute drains, watercourses and soil. Use
authorized waste collection facilities, including civil
amen ity sites and garages providing facilities for
disposal of used oil and used oil filters. If in doubt,
contact your local authority for advice on disposal.
The regulations concerning the pollution of the
environment will vary from country to country.
Maintenance and do-it-yourself 8-13
Condition: 'Except for China'/
(350,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-14 Maintenance and do-it-yourself
T32A130827-88FE8B68-7EC8-43A9-87D9-027F2C7FD6F9
JVM0398X
QR25DE engine
1. Crankshaft pulley
2. Drive belt auto-tensioner
3. Water pump
4. Alternator
5. Air conditioner compressor
SDI1881
MR20DD engine
1. Alternator
2. Drive belt auto-tensioner
3. Crankshaft pulley
4. Air conditioner compressor
5. Water pump
JVM0439X
R9M engine
1. Water pump
2. Idler pulley
3. Alternator
4. Crankshaft pulley
5. Drive belt auto-tensioner
6. Air conditioner compressor
Be sure the ignition switch is in the “OFF” position.
Visually inspect the belt for signs of unusual wear, cuts,
fraying or looseness. Check regularly for condition. If
the belt is in poor condition or loose, have it replaced
or adjusted by a NISSAN dealer.
GUID-15F30443-A743-4FB1-8DD2-0348CDB 56899
WARNING:
Be sure the engine and ignition switch are off
and that the parking brake is applied.
Replace the spark plugs according to the maintenance
log shown in a separate maintenance booklet.
If replacement is required, contact a NISSAN dealer.
IRIDIUM-TIPPED SPARK PLUGS
GUID-D0767371-DD30-47E5-8EA2-C3004E7D8 712
SDI2020
It is not necessary to replace the iridium-tipped spark
plugs as frequently as the conventional type of spark
plugs. These spark plugs are designed to last much
longer than the conventional type of spark plugs.
CAUTION:
. Do not reuse the iridium-tipped spark plugs
by cleaning or re-gapping.
. Always replace with the recommended ir-
idium-tipped spark plugs.
DRIVE BELT
SPARK PLUGS (gasoline engine
models)
Condition: 'Except for China'/
(351,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-25E4620C-DE5B-4B75-B071-642C43C0D27B
CHECKING PARKING BRAKE
T32A130827-B3B65B74-4F6E-4C29-8235-69F87496ED8E
Pedal type
GUID-7CD88690-D8CF-43E1-96DF-FC6437C41039
SDI1391D
From the released position, depress the parking brake
pedal slowly and firmly. If the number of clicks is out of
the range listed, see a NISSAN dealer.
6 to 7 clicks
Depressing force 196 N (20 kg, 44 lb)
Switch type
GUID-56D5F3BC-8A8D-4E65-8388-10DE21AC8A13
Periodically check the holding ability of the parking
brake by parking on a steep hill and restraining the
vehicle by using only the parking brake. If it does not
hold satisfactorily, see a NISSAN dealer.
CHECKING FOOT BRAKE PEDAL
T32A130827-1F622C6B-DF2B-4E16-B146-D21BEC4F89C4
DI1020MR
WARNING:
See a NISSAN dealer for a brake system check if
the foot brake pedal height does not return to
normal.
With the engine running, check the distance between
the upper surface of the pedal and the metal floor. If it
is out the range listed, see a NISSAN dealer.
Depressing force
490 N (50 kg, 110 lb)
LHD model RHD model
*
A
: 75 mm (3.0 in) or
more
*
A
: 85 mm (3.3 in) or
more
Self-adjusting brakes
T32A130827-D013BB8E-379E-4FA2-A485-E22643A173FA
Your vehicle is equipped with self-adjusting brakes.
The disc-type brakes self-adjust every time the foot
brake pedal is applied.
Brake pad wear warning
T32A130827-4DBFEE6A-552E-465B-9896-BF7E8484B818
The disc brake pads have audible wear warnings.
When a brake pad requires replacement, it will make a
high pitched scraping sound when the vehicle is in
motion. This scraping sound will first occur only when
the brake pedal is depressed. After more wear of the
brake pad, the sound will always be heard even if the
brake pedal is not depressed. Have the brakes
checked as soon as possible if the wear warning
sound is heard.
Under some driving or climate conditions, occasional
brake squeaks, squeals or other noises may be heard.
Occasional brake noise during light to moderate stops
is normal and does not affect the function or
performance of the brake system.
Proper brake inspection intervals should be followed.
For additional information, see a separate maintenance
booklet.
BRAKE BOOSTER
T32A130827-44610C9A-C5C7-4DF3-80B7-849 08CFA7E50
Check the brake booster function as follows:
1. With the engine off, depress and release the foot
brake pedal several times. When the brake pedal
movement (distance of travel) remains the same
from one pedal application to the next, continue on
to the next step.
2. While depressing the foot brake pedal, start the
engine. The pedal height should drop a little.
3. With the foot brake pedal depressed, stop the
engine. Keep the pedal depressed for about 30
seconds. The pedal height should not change.
Maintenance and do-it-yourself 8-15
BRAKES
Condition: 'Except for China'/
(352,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-16 Maintenance and do-it-yourself
4. Run the engine for 1 minute without depressing
the foot brake pedal, then turn it off. Depress the
foot brake pedal several times. The pedal travel
distance will decrease gradually with each de-
pression as the vacuum is released from the
booster.
If the brakes do not operate properly, have the brakes
checked by a NISSAN dealer.
T32A130827-1040D229-3352-4917-A316-DB46DD616FA8
WARNING:
. Use only new fluid from a sealed container.
Old, inferior, or contaminated fluid may
dama ge the b rake system. The use of
improper fluids can da mage the brake
system and affect the vehicle’s stopping
ability.
. Clean the filler cap before removing.
. Brake fluid is poisonous and should b e
stored carefully in marked containers out
of the reach of children.
CAUTION:
Do not spill the fluid on painted surfaces. This
will damage the paint. If fluid is spilled, wash it
off with plenty of water immediately.
JVM0422X
*
A
LHD models
*
B
RHD models
Check the fluid level in the reservoir. If the fluid is
below the MIN line
*
2
, the brake warning light will
illuminate. Add fluid up to the MAX line
*
1
. (See
“Recommended Fluids/lubricants and capacities” (P.9-
2) for recommended types of fluid.)
If the fluid must be added frequently, the system should
be thoroughly checked by a NISSAN dealer.
BRAKE FLUID
Condition: 'Except for China'/
(353,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-C7D597B5-5EE0-4D20-AB94-274D1A7623E0
WARNING:
. Use only new fluid from a sealed container.
Old, inferior, or contaminated fluid may
damage the clutch system.
. Clean the filler cap before removing.
. Clutch fluid is poisonous and should be
stored carefully in marked containers out of
the reach of children.
CAUTION:
Do not spill the clutch fluid on painted surfaces.
This will damage the paint. If clutch fluid is
spilled, wash it off with plenty of water immedi-
ately.
JVM0422X
*
A
LHD models
*
B
RHD models
Check the fluid level in the reservoir. If the fluid is
below the MIN line
*
2
, add fluid up to the MAX line
*
1
. (See “Recommended Fluids/lubricants and capa-
cities” (P.9-2) for the recommended types of fluid.)
If the fluid must be added frequently, the clutch system
should be thoroughly checked by a NISSAN dealer.
T32A130827-A09B9085-A503-4BD2-90B6-A9712DBC4699
Contact a NISSAN dealer if checking or replacement
is required.
CAUTION:
. Use only Genuine NISSAN CVT Fluid NS-3.
Do not mix with other fluids.
. Using transmission fluid other than Genuine
NISSAN CVT Fluid NS-3 will damage the
CVT, which is not covered by the warranty.
T32A130827-D2355B7A-043F-4BB2-9663-01336EFEC28F
JVM0378X
WARNING:
Operating the engine with the air cleaner filter
off can cause you or others to be burned. The air
cleaner filter not only cleans the intake air, it
also stops flame if the engine backfires. If the air
cleaner filter is not installed and the engine
backfires, you could be burned. Never drive with
the air cleaner filter off. Be cautious working on
the engine when the air cleaner filter is off.
To remove the filter, unlatch the retaining clips
*
1
, and
pull the cover
*
2
upward.
The viscous paper type filter element should not be
cleaned and reused. The dry paper type filter element
may be cleaned and reused. Replace the air filter
according to the maintenance log shown in a separate
maintenance booklet.
When replacing the air filter, wipe the inside of the air
cleaner housing and the cover with a damp cloth.
Maintenance and do-it-yourself 8-17
CLUTCH FLUID (if equipped)
CONTINUOUSLY VARIABLE
TRANSMISSION (CVT) FLUID (if
equipped)
AIR CLEANER FILTER
Condition: 'Except for China'/
(354,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-18 Maintenance and do-it-yourself
T32A130827-92A6E04C-A62D-49E8-AF64-DB 5B5FFE6ED7
WINDSHIELD WIPER BLADES
T32A130827-DF3D1435-AA51-4883-8010-DB50D9990E2E
Cleaning
T32A130827-8C27AFED-580F-433B-9CE9-DEA808733750
If the windshield does not become clear after using the
windshield washer or if the wiper blades chatter when
operating the windshield wipers, wax or other materials
may be on the windshield and/or wiper blades.
Clean the outside of the windshield surface with a
washer solution or mild detergent. Your windshield is
clean if beads do not form when rinsing with water.
Clean the blade by wiping it with a cloth soaked in a
washer solution or a mild detergent. Rinse the blade
with water. If your windshield is still not clear after
cleaning the blades and using the wipers, replace the
blades.
JVM0389X
Be careful not to clog the washer nozzle
*
A
. This may
cause improper windshield washer operation. If the
nozzle is clogged, remove any objects with a needle or
small pin
*
B
. Be careful not to damage the nozzle.
WIPER BLADES
Condition: 'Except for China'/
(355,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Replacing
T32A130827-42DE41B1-2781-4C58-9227-157AE89E65EF
SDI2359
Replace the wiper blades if they are worn.
Before replacing the wiper blades, the wiper should be
in the fully up position to avoid scratching the engine
hood or damaging the wiper arm. To pull up the wiper
arm, see “Wiper and washer switch” (P.2-47).
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab
*
A
, and then move
the wiper blade down the wiper arm to remove
*
1
.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm until
it clicks into place.
CAUTION:
. After wiper blade replacement, return the
wiper arm to its original position. Otherwise
the wiper arm or the engine hood may be
scratched and may cause damage when the
engine hood is opened.
. Worn wiper blades can damage the wind-
shield and impair driver vision.
REAR WINDOW WIPER BLADE
T32A130827-CB9D8342-2180-4FFF-9BDC-CF4DC13E7621
Contact a NISSAN dealer if checking or replacement
is required.
T32A130827-B990E0BD-E958-4300-AFB5-DA449BD53928
JVM0380X
WARNING:
Anti-freeze is poisonous and should be stored
carefully in marked containers out of the reach
of children.
To check the fluid level, use your finger to plug the
center hole
*
1
of the cap/tube assembly, then remove
it from the reservoir.
If there is no fluid in the tube, add fluid.
Add a washer solvent to the water for better cleaning.
In the winter season, add a windshield washer anti-
freeze. Follow the manufacturer’s instructions for the
mixture ratio.
Maintenance and do-it-yourself 8-19
WINDOW WASHER FLUID
Condition: 'Except for China'/
(356,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-20 Maintenance and do-it-yourself
T32A130827-D956DCD1-8BC7-44DD-92C0-14451F2C7BB2
SDI1573
VEHICLE BATTERY
T32A130827-2FD7FB13-E56B-4088-919A-39 C54C986E76
WARNING:
Do not operate the vehicle if the fluid in the
battery is low. Low battery fluid can cause a
higher load on the battery which can generate
heat, reduce battery life, and in some cases lead
to an explosion.
BATTERY
Condition: 'Except for China'/
(357,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Checking battery fluid level
T32A130827-C7602421-9FE8-4ABF-9401-FDF02316F502
DI0137MD
SDI1480D
Check the fluid level in each cell. The battery fluid level
should be between the UPPER LEVEL
*
1
and
LOWER LEVEL
*
2
lines.
If it is necessary to add fluid, add only demineralized/
distilled water to bring the level to the indicator in each
filler opening. Do not overfill.
1. Remove the cell plugs
*
3
(if equipped) using a
suitable tool.
2. Add demineralized/distilled water up to the
UPPER LEVEL
*
1
line.
If the side of the battery is not clear, check the
distilled water level by looking directly above the
cell; the condition
*
A
indicates OK and the
condition
*
B
needs more to be added.
3. Replace and tighten the cell plugs.
. Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
. Keep the battery surface clean and dry. Clean the
battery with a solution of baking soda and water.
. Make certain the terminal connections are clean
and securely tightened.
. If the vehicle is not to be used for more than 30
days, disconnect the negative (−) battery terminal
cable to prevent battery discharge.
Jump starting
T32A130827-B9E1C45F-8AA3-4F68-A3A1-97F3A11BE41D
If jump starting is necessary, see “Jump starting” (P.6-
8). If the engine does not start by jump starting or the
battery does not charge, the battery may have to be
replaced. Contact a NISSAN dealer for replacing the
battery.
REMOTE CONTROLLER BATTERY
T32A130827-4E0E6233-619D-449B-803A-3C1D1831CF27
Battery replacement
T32A130827-73896530-7C0A-4291-A663-1E8096A5284C
CAUTION:
. Be careful not to allow children to swallow
the battery and removed parts.
. An improperly disposed battery can harm
the environment. Always confirm local reg-
ulations for battery disposal.
. When changing batteries, do not let dust or
oil get on the components.
. There is danger of explosion if the lithium
battery is incorrectly replaced. Replace only
with the same or equivalent type.
JVM0381X
To replace the battery:
1. Insert a small screwdriver into the slit
*
A
to open
the lid. Use a cloth to protect the casing.
2. Replace the battery with a new one.
Recommended battery: CR2032 or equivalent
.
Do not touch the internal circuit and electric
terminals as doing so could cause a malfunc-
tion.
Maintenance and do-it-yourself 8-21
Condition: 'Except for China'/
(358,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-22 Maintenance and do-it-yourself
.
Make sure that the + side faces the bottom of
the case
*
B
.
3. Close the lid securely.
4. Operate the buttons to check its operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Note: Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
For Canada:
This device complies wit h Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
INTELLIGENT KEY BATTERY
T32A130827-0795585A-4590-40CB-B4DD-549A1FA4DDE8
Battery replacement
T32A130827-C7C6166A-C4F7-4BA4-94AA-A78E882D4D47
CAUTION:
. Be careful not to allow children to swallow
the battery and removed parts.
. An improperly disposed battery can harm
the environment. Always confirm local reg-
ulations for battery disposal.
. When changing batteries, do not let dust or
oil get on the components.
. There is danger of explosion if the lithium
battery is incorrectly replaced. Replace only
with the same or equivalent type.
JVM0317X
To replace the battery:
1. Release the lock knob at the back of the key and
remove the mechanical key. (See “Mechanical
key” (P.3-4).)
2. Insert a flat-blade screwdriver wrapped with a
cloth into the slit of the corner and twist it to
separate the upper part from the lower part.
3. Replace the battery with a new one.
.
Recommended battery: CR2032 or equivalent
.
Do not touch the internal circuit and electric
terminals as doing so could cause a malfunc-
tion.
Condition: 'Except for China'/
(359,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
.
Make sure that the + side faces the bottom of
the case.
SDI2452
4. Align the tips of the upper and lower parts
*
1
,
and then push them together until it is securely
closed
*
2
.
5. Operate the buttons to check its operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Note: Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
For Canada:
This device complies wit h Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
T32A130827-12416677-0A48-4E66-B067-4EB7C158E2E4
The variable voltage control system measures the
amount of electrical discharge from the battery and
controls voltage generated by the alternator.
CAUTION:
. Do not ground accessories directly to the
battery terminal. Doing so will bypass the
variable voltage control system and the
vehicle battery may not charge completely.
. Use electrical accessories with the engine
running to avoid discharging the vehicle
battery.
Maintenance and do-it-yourself 8-23
VARIABLE VOLTAGE CONTROL
SYSTEM (if equipped)
Condition: 'Except for China'/
(360,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-24 Maintenance and do-it-yourself
T32A130827-8AB0AAAB-E205-4819-9DC6-D43AB8CC9EC1
ENGINE COMPARTMENT
T32A130827-183829BC-8212-47E4-8904-A6 582E9358C5
JVM0386X
CAUTION:
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the e lectrical system or
cause a fire.
If any electrical equipment does not operate, check for
an open fuse.
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Open the engine hood.
4. Remove the air cleaner duct. (See “Engine
compartment check locations” (P.8-5).)
5. Remove the fuse/fusible link box cover by using a
suitable tool and pushing the tab.
6. Locate the fuse that needs to be replaced.
SDI1754
7. Remove the fuse using the fuse puller located in
the passenger compartment.
8. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
JVM0444X
The holder
*
1
also contains the fuses. For checking
and/or replacing, see a NISSAN dealer.
Fusible links
T32A130827-208E32EE-667A-42F8-A3BB-B5 52FCE416DA
If any electrical equipment does not operate and the
fuses are in good condition, check the fusible links. If
any of these fusible links are melted, replace only with
genuine NISSAN parts.
PASSENGER COMPARTMENT
T32A130827-AE5A32D9-86A8-49E9-9B78-3857F2C7C1FE
CAUTION:
Never use a fuse of a higher or lower amperage
rating than that specified on the fuse box cover.
This could damage the e lectrical system or
cause a fire.
If any electrical equipment does not operate, check for
an open fuse.
FUSES
Condition: 'Except for China'/
(361,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Outer side of the instrument panel
GUID-98D0498D-2955-47C0-AA09-13C3DDECAE27
JVM0387X
For all LHD model
JVM0445X
For Stop/Start System or Idling Stop System (if equipped)
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Remove the fuse box cover.
4. Locate the fuse that needs to be replaced.
5. Remove the fuse using the fuse puller
*
A
.
SDI1754
6. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
Maintenance and do-it-yourself 8-25
Condition: 'Except for China'/
(362,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-26 Maintenance and do-it-yourself
Glove box
GUID-15A32307-7137-4C89-A48B-85EC6F9F70D8
JVM0388X
RHD model
1. Be sure the ignition switch is in the “OFF”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Open the glove box and unlock the damper
*
1
.
4. Hold the glove bo x lid so that the di stance
between the upper end of the lid and the
dashboard is about 5 cm (2 in), and then pull off
the hinges
*
2
located on the underside of the lid.
5. Unlock the left and right stoppers
*
3
and remove
the glove box lid.
6. Locate the fuse that needs to be replaced.
7. Remove the fuse using the fuse puller.
SDI1754
8. If the fuse is open
*
A
, replace it with a new fuse
*
B
.
If the new fuse also opens, after installing, have the
electrical system checked, and if necessary repaired,
by a NISSAN dealer.
Extended storage fuse switch
GUID-4DACCDD0-02EB-4845-B9C4-BFD1EAF1C1EF
JVM0415X
Example
To reduce battery drain, the extended storage fuse
switch comes from the factory switched off. Prior to
delivery o f your vehicle, the sw itch is pushed in
(switched on) and should always remain on.
If the extended storage fuse switch is not pushed in
(switched on), the “Shipping Mode On Push Storage
Fuse” warning may appear in the vehicle information
display. See “Vehicle information display warnings and
indicators” (P.2-28).
If any electrical equipment does not operate, remove
the extended storage fuse switch and push it in again.
NOTE:
If the extended storage fuse switch malfunc-
tions, see a NISSAN dealer.
How to remove the extended storage fuse
switch:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. To remove the extended storage fuse switch, be
sure the ignition switch is in the “OFF” or “LOCK”
position.
2. Be sure the headlight switch is in the “OFF”
position.
Condition: 'Except for China'/
(363,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3. Remove the fuse box cover.
4. Pinch the locking tabs
*
1
found on each side of
the extended storage fuse switch.
5. Pull the extended storage fuse switch straight out
from the fuse box
*
2
.
How to remove the extended storage fuse
switch:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. To remove the extended storage fuse switch, be
sure the ignition switch is in the “OFF” or “LOCK”
position.
2. Be sure the headlight switch is in the “OFF”
position.
3. Remove the fuse box cover.
4. Pinch the locking tabs
*
1
found on each side of
the extended storage fuse switch.
5. Pull the extended storage fuse switch straight out
from the fuse box
*
2
.
T32A130827-A9037DC9-DD9B-4B9A-BE7E-9036F9796D86
HEADLIGHTS
T32A130827-ED0F3255-CEC5-401B-8EE0-63 DB4CAAD8B3
LED headlight bulb
T32A130827-EAA65B62-0E55-490E-990B-536AFDF2EB8D
If replacement is required, contact a NISSAN dealer.
Halogen headlight bulb
T32A130827-AAC92517-09B4-4636-9E2D-83C41DBC0FCC
The halogen headlight is a semi-sealed beam type
which uses replaceable headlight (halogen) bulbs.
They can be replaced from inside the engine compart-
ment without removing the headlight assembly.
CAUTION:
High-pressure halogen gas is sealed inside the
bulb. The bulb may break if the glass envelope is
scratched or the bulb is dropped.
Low-beam:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVM0395X
1. Disconnect the battery negative cable.
2. Disconnect the electrical connector
*
1
from
the rear end of the bulb.
3. Remove the headlight bulb
*
2
by turning it
counter clockwise. Do not shake or rotate the
bulb when removing it.
4. Install the new bulb in the reverse order of
removal.
Maintenance and do-it-yourself 8-27
LIGHTS
Condition: 'Except for China'/
(364,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-28 Maintenance and do-it-yourself
High-beam:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVM0396X
1. Disconnect the battery negative cable.
2. Turn the cove r
*
1
counter clockwise and
remove the cover.
3. Disconnect the electrical connector
*
2
from
the rear end of the bulb.
4. Remove the headlight bulb
*
3
by turning it
counter clockwise. Do not shake or rotate the
bulb when removing it.
5. Install the new bulb in the reverse order of
removal.
CAUTION:
. When handling the bulb, do not touch the
glass envelope.
. Use the same number and wattage as
originally installed:
Halogen headlight model
High beam bulb: 65W (H9)
Low beam bulb: 55W (H11)
. Do not leave the bulb out of the headlight
reflector for a long period of time as dust,
moisture and smoke may enter the headlight
body and affect the perfo rmance of the
headlight.
Aiming adjustment is not necessary if only the bulbs
are replaced. When aiming adjustment is necessary,
contact a NISSAN dealer.
Fog may temporarily form inside the lens of the exterior
lights in the rain or in a car wash. A temperature
difference between the inside and the outside of the
lens causes the fog. This is not a malfunction. If large
drops of water collect inside the lens, contact a
NISSAN dealer.
EXTERIOR LIGHTS
T32A130827-CDB84EFB-58D1-403B-9E3B-411F1E572715
Item Wattage (W)
Front turn signal light 21
Front clearance light/Daytime
running light*
LED
Front fog light (if equipped) 55
Side turn signal light* LED
Rear combination light
Turn signal 21
Stop 21
Tail light 5
Reverse light 16
Rear fog light (if equipped) 21
High-mounted stop light* LED
License plate light 5
*: See a NISSAN dealer for replacement.
Condition: 'Except for China'/
(365,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
INTERIOR LIGHTS
T32A130827-F1957544-EA31-4B98-9D49-891C8723F994
Item
Wattage (W)
Map lights
LED
Vanity mirror light
1.8
Console light
LED
Room light (if equipped)
8
Rear personal light (if equipped)
8
Luggage room light
5
Maintenance and do-it-yourself 8-29
Condition: 'Except for China'/
(366,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-30 Maintenance and do-it-yourself
LIGHT LOCATIONS
T32A130827-C58F69F9-14F3-457E-BBBC-8C6BABFB731F
JVM0383X
1. Front turn signal light
2. Headlight (high-beam)
3. Headlight (low-beam)
4. Front map light
5. Room light (if equipped)
6. Side turn signal light
7. Clearance light/Daytime running light
8. Front fog light (if equipped)
9. High-mounted stop light
10. Rear combination light (tail light, stop light, rear
turn signal light)
11. Rear personal light (if equipped)
12. Rear fog light (if equipped)
13. License plate light
14. Reverse light/Tail light
15. Luggage room light
Condition: 'Except for China'/
(367,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Replacement procedures
T32A130827-57D24B47-1FF9-4557-B091-1D11EF1DB1BE
SDI1679
: REMOVE
: INSTALL
All other lights are either type A, B, C, D, E or F. When
replacing a bulb, first remove the lens and/or cover.
JVM0397X
Front turn signal light
JVM0417X
Front fog light (if equipped)
Maintenance and do-it-yourself 8-31
Condition: 'Except for China'/
(368,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-32 Maintenance and do-it-yourself
JVM0418X
Rear combination light
JVM0424X
Reverse light/Tail light
JVM0419X
License plate light
Condition: 'Except for China'/
(369,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVM0420X
Rear fog light (if equipped)
SDI1839
Vanity mirror light
SDI1499A
Room light (if equipped)
SDI2031
Rear personal light (if equipped)
JVM0426X
Luggage room light
LEGAL REQUIREMENT TO ADJUST
HEADLIGHT BEAM
GUID-FE807A2B-15BC-4AAB-B280-06A5E1C16E30
When the vehicle is driven in a country where the
driving lane is different to your home country, affix an
opaque sticker on the headlight.
Maintenance and do-it-yourself 8-33
Condition: 'Except for China'/
(370,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-34 Maintenance and do-it-yourself
JVM0393X
Left-Hand Drive (LHD) model
Condition: 'Except for China'/
(371,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVM0394X
Right-Hand Drive (RHD) model
1. Place the ignition switch in the “OFF” position and
wait until the headlights cool down.
2. Prepare the stickers referring to the figure. Make
the stickers
*
A
that will be affixed to the surface
of the right side headlight and the left side
headlight.
NOTE:
.
Use an opaque material that prevents the
light from passing through it.
.
Note that other transparent materials do
not work effectively.
3. Affix the sticker by aligning the corner
*
B
of the
sticker with the position of the mark
*
C
that is
located on the surface of the headlight seen from
front.
Affix the sticker as illustrated by aligning the mark
*
C
with dividing lines
*
D
and
*
E
.
NOTE:
Align the mark
*
C
with the center mark
of the headlight bulb.
Maintenance and do-it-yourself 8-35
Condition: 'Except for China'/
(372,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-36 Maintenance and do-it-yourself
T32A130827-06008459-1ACE-4E73-93E7-4A322F46E805
If you have a flat tire, see “Flat tire” (P.6-2).
TIRE PRESSURE MONITORING SYSTEM
(TPMS) (if equipped)
GUID-F58BF3DF-6647-4E90-98C6-3B8E7713B953
The Tire Pressure Monitoring System (TPMS) monitors
tire pressure of all tires except the spare. When the low
tire pressure warning light is lit, one or more of your
tires is significantly under-inflated.
The TPMS will activate only when the vehicle is driven
at speeds above 25 km/h (16 MPH). Also, this system
may not detect a sudden drop in tire pressure (for
example a flat tire while driving).
For more details about the TPMS, see “Tire Pressure
Monitoring System (TPMS)” (P.6-2), “Tire Pressure
Monitoring System (TPMS)” (P.5-4) and “Tire Pressure
Monitoring System (TPMS)” (P.8-36).
For additional information, see “Low tire pressure
warning light” (P.2-14).
TIRE INFLATION PRESSURE
T32A130827-90622EBC-3A8D-41F6-8B20-6699CA22E4EE
Periodically check the pressure of the tires, including
the spare. An incorrect tire pressure may adversely
affect tire life and vehicle handling. The tire pressure
should be checked when tires are COLD. Tires are
considered COLD after the vehicle has been parked
for 3 or more hours, or driven less than 1.6 km (1 mile).
COLD tire pressures are shown on the tire placard.
Insufficient pressure can lead to an overheating of the
tire and subsequent internal damage. At high speeds,
this could result in tread separation and even bursting
of the tire.
TYPES OF TIRES
T32A130827-F4ADFA12-B902-4BB7-BDEB-65DF9756DE64
CAUTION:
When changing or replacing tires, be sure all
four tires are of the same type (that is, summer,
all season or snow) and construction. A NISSAN
dealer may be able to help you with information
about tire type, size, speed rating and avail-
ability.
Replacement tires may have a lower speed rating than
the factory equipped tires, and they may not match the
potential maximum vehicle speed. Never exceed the
maximum speed rating of the tire.
All season tires
T32A130827-E671C002-8738-4216-AEC8-6CD14C8720FA
NISSAN specifies all season tires on some models to
provide good performance all year, including snowy
and icy road conditions. All season tires are identified
by ALL SEASON and/or M&S on the tire sidewall.
Snow tires have better snow traction than all season
tires and may be more appropriate in some areas.
Summer tires
T32A130827-7935F4FA-4F3E-416C-8CF7-BB4329FCC988
NISSAN specifies summer tires on some models to
provide superior performance on dry roads. Summer
tire performance is substantially reduced in snow and
ice. Summer tires do not have the tire traction rating
M&S on the tire sidewall.
If you plan to operate your vehicle in snowy or icy
conditions, NISSAN recommends the use of snow or
all season tires on all four wheels.
Snow tires
T32A130827-D491D99F-2520-4F05-BD0B-08E3B4DCF929
If snow tires are needed, it is necessary to select tires
equivalent in size and load rating to the o riginal
equipment tires. If you do not, it can adversely affect
the safety and handling of your vehicle.
Generally, snow tires have lower speed ratings than
factory equipped tires and may not match the potential
maximum vehicle speed. Never exceed the maximum
speed rating of the tire. If you install snow tires, they
must be the same size, brand, construction and tread
pattern on all four wheels.
For additional traction on icy roads, studded tires may
be used. However, some states and provinces prohibit
their use. Check local, state and provincial laws before
installing studded tires. Skid and traction capabilities
of studded snow tires on wet or dry surfaces may be
poorer than that of non-studded snow tires.
TIRE CHAINS
T32A130827-00A7D296-B49D-4E98-B78C-D04C1A0CDB83
Use of tire chains may be prohibited according to
location. Check the local laws before installing tire
chains. When installing tire chains, make sure that they
are of proper size for the tires on your vehicle and are
installed according to the chain manufacturer’s in-
structions.
Use chain tensioners when recommended by the tire
chain manufacturer to ensure a tight fit. Loose end links
of the tire chains must be secured or removed to
prevent the possibility of whipping action damage to
the fenders or underbody. If possible, avoid fully
loading your vehicle when using tire chains. In addition,
drive at a reduced speed. Otherwise, your vehicle may
be damaged and/or vehicle handling and performance
may be adversely affected.
TIRES AND WHEELS
Condition: 'Except for China'/
(373,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Tire chains must be installed only on the front
wheels and not on the rear wheels. Do not use
the chains on dry roads.
Never install tire chains on a Temporary-use spare tire
(TEMPORARY USE ONLY) (if equipped).
Do not drive with tire chains on paved roads which are
clear of snow. Driving with chains in such conditions
can cause damage to the various mechanisms of the
vehicle due to some overstress.
TIRE ROTATION
T32A130827-CDFA213B-EF61-4DDD-81D2-937960565405
SDI1662
NISSAN recommends that tires be rotated every 5,000
km (3,000 miles) for Four-Wheel Drive (4WD) or every
10,000 km (6,000 miles) for Two-Wheel Drive (2WD)
model. However, the timing for tire rotation may vary
according to your driving habits and the road surface
conditions. (See “Flat tire” (P.6-2) for the tire replace-
ment.)
WARNING:
. After rotating the tires, adjust the tire
pressure.
. Retighten the wheel nuts when the vehicle
has been driven for 1,000 km (600 miles)
(also in cases of a flat tire, etc.).
. Do not include the spare tire in tire rotation.
. Incorrect tire selection, fitting, care, o r
maintenance can affect vehicle safety with
ris k of accid ent and injury. If in doubt,
consult a NISSAN dealer or the tire manu-
facturer.
For models equipped with Tire Pressure
Monitoring System (TPMS)
GUID-96E87808-A760-4760-BDC5-1A54CB45C74F
After the tires are rotated, the TPMS must be reset.
See “Tire Pressure Monitoring System (TPMS)” (P.5-
4) for details about the resetting procedure.
TIRE WEAR AND DAMAGE
T32A130827-D1D13486-EB41-427C-913C-3E156812DF12
SDI1663
*
1
Wear indicator
*
2
Wear indicator location mark
Tires should be periodically inspec ted for wear,
cracking, bulging or objects caught in the tread. If
excessive wear, cracks, bulging or deep cuts are
found, the tire should be replaced immediately.
The original tires have a built-in tread wear indicator.
When the wear indicator is visible, the tire should be
replaced.
Improper service of a spare tire may result in serious
personal injury. If it is necessary to repair the spare tire,
contact a NISSAN dealer.
TIRE AGE
T32A130827-4C752360-C652-47AC-9021-149E77E37E87
Never use a tire over six years old, regardless of
whether it has been used or not.
Tires degrade with age as well as with the vehicle
usage. Have your tires checked and balanced often by
a repair shop or, if you prefer, a NISSAN dealer.
CHANGING TIRES AND WHEELS
T32A130827-485EBE39-EDC3-4100-8516-A085FFEF9153
WARNING:
Do not install a deformed wheel or tire even if it
has been repaired. Such wheels or tires could
have structural damage and could fail without
warning.
When replacing a tire, use the same size, speed rating
and load carrying capacity as originally equipped. (See
“Tires and wheels” (P.9-7) for recommended types and
sizes of tires and wheels.) The use of tires other than
those recommended or the mixed use of tires of
different brands, construction (bias, bias-belted, or
radial), or tread patterns can adversely affect the ride,
braking, handling, ground clearance, body-to-tire
clearance, snow chain clearance, Tire Pressure Mon-
itoring System (TPMS), speedome ter calibration,
headlight aim and bumper height. Some of these
effects may lead to accidents and could result in
serious personal injury.
If the wheels are changed for any reason, always
replace with wheels which have the same offset
dimension. Wheels of a different offset could cause
early tire wear, possibly degraded vehicle handling
characteristics and/or interference with the brake
Maintenance and do-it-yourself 8-37
Condition: 'Except for China'/
(374,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-38 Maintenance and do-it-yourself
discs/drums. Such interference can lead to decreased
braking efficiency and/or early brake pad/shoe wear.
Confirm the following for the TPMS (if equipped).
WARNING:
. After a tire or a wheel is replaced, the TPMS
must be reset. (See “Tire Pressure Monitor-
ing System (TPMS)” (P.6-2), “Tire Pressure
Monitoring System (TPMS)” (P.5-4) and “Tire
Pressure Monitoring System (TPMS)” (P.8-
36) for details about the resetting proce-
dure.)
. When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after 1 minute. Contact a NISSAN
dealer as soon as possible for tire replace-
ment and/or system resetting.
. Replac ing tires with those not originally
specified by NISSAN could affect the proper
operation of the TPMS.
Four-Wheel Drive (4WD) model
T32A130827-29DD09B1-18AC-46B3-820F-49E30AE494CC
CAUTION:
Always use tir es of the s am e size, brand,
construction (bias, bias-belted or radial), and
tread pattern on all four wheels. Failure to do so
may result in a circumference difference be-
tween tires on the front and rear axles which will
cause excessive tire wear and may damage the
transmission, tra nsfer case a nd differential
gears.
Only use spare tires specified for each 4WD model.
WHEEL BALANCE
T32A130827-4BEEC603-E957-4D95-B9E4-AE2CE6D62E1A
Unbalanced wheels may affect vehicle handling and
tire life. Even with regular use, wheels can get out of
balance. Therefore, they should be balanced as
required.
SPARE TIRE (if equipped)
GUID-32AF256B-8AC0-45C9-B78B-A5C189481EE5
Temporary-use spare tire (if equipped)
T32A130827-F3871F85-6706-4E1F-ACDF-84DBB 55FE17B
The spare tire supplied with your vehicle varies
depending on the model. See “Tires and wheels”
(P.9-7) for applicable spare tire.
SDI1912
Spare tire label (if equipped)
A temporary-use spare tire (different size from the
original tire) is supplied with your vehicle.
Observe the following precautions if the spare tire
must be used, otherwise your vehicle could be
damaged or involved in an accident.
When a spare tire is mounted, the Tire Pressure
Monit oring System (TPMS) ( if equipped) will not
function.
CAUTION:
. The spare tire should be used only for
emergency. It should be replaced by the
standard tire at the first opportunity.
. Drive carefully while the spare tire is in-
stalled.
. Avoid sharp turns and abrupt braking while
driving.
. Peri odically check the T-type spare tire
inflation pressure, and always keep it at
420 kPa (4.2 kgf/cm
2
, 60 psi). (T155/90 D17
tire)
. Periodically check the spare tire inflation
pressure, and always keep it at 300 kPa (3.0
kgf/cm
2
, 44psi). (225/65 R17 tire)
. Do not drive your vehicle at speeds faster
than 80 km/h (50 MPH).
. Do not use tire chains on a spare tire. Tire
chains will not fit properly on the spare tire
and may cause damage to the vehicle.
. Because the spare tire is smaller than the
original tire, ground clearance is reduced. To
avoid damage to the vehicle do not drive
over obstacles. Also do not drive the vehicle
through an automatic car wash since it may
get caught.
. Do not use the spare tire on other vehicles.
. Do not use more than one spare tire at the
same time.
. Do not tow a trailer while the spare tire is
installed.
Condition: 'Except for China'/
(375,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Conventional spare tire (if equipped)
GUID-3E182B1A-8DEE-4148-861F-BC78EA9F82EE
A standard tire (the same size as the original tire) is
supplied with your vehicle.
Maintenance and do-it-yourself 8-39
Condition: 'Except for China'/
(376,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
8-40 Maintenance and do-it-yourself
MEMO
Condition: 'Except for China'/

Related Topics

In case of emergency
Hazard indicator flasher switch Flat tire Jump starting Push starting If your vehicle overheats Towing your vehicle
Appearance and care
Cleaning exterior Cleaning interior Corrosion protection Maintenance requirements General maintenance Explanation of general maintenance items Maintenance precautions Engine compartment check locations Engine cooling system Engine oil Drive belt Spark plugs (gasoline engine models) Brakes Brake fluid Clutch fluid (if equipped) Continuously Variable Transmission (CVT) fluid (if equipped) Air cleaner filter Wiper blades Window washer fluid Battery Variable voltage control system (if equipped) Fuses Lights Tires and wheels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot