Get Getting to know your vehicle -> Rear view Guide for Renault Scenic 4 Door Fifth Generation (2023-2026)

REAR VIEW

For safety reasons, car-

ry out any adjustments

while the vehicle is sta-

tionary.

Objects observed in

the rear view mirror

glass are actually clos-

er than they appear.

Rear view mirrors

Exterior rear view mirrors with

electrical adjustment:

2

For your safety, take this into

account in order to correctly as-

sess the distance before any

manoeuvre.

Electrical folding mirrors

The door mirrors will fold-out auto-

matically when the vehicle is un-

locked. The door mirrors fold in when

the vehicle is locked.

You can deactivate/activate auto-

matic folding of the door mirrors

ꢀ 139.

Rear view mirrors which tilt in re-

verse gear

You can force folding by pressing

the switch 1 . In this situation, the

door mirrors will remain folded until

the 1 button is pressed again, re-

gardless of automatic folding.

Select the door mirror using on of the

switches 3 , then use the switch 2 to

adjust it to the desired position.

Special case

When the rear view mirror has been

manually deployed or folded back, it

is possible to reset it to a usage posi-

tion.

Heated rear view mirrors

While the engine is running, mirror

de-icing is activated simultaneously

with the rear screen de-icing/

demisting.

To do this, press the switch 1 . A me-

chanical noise from the rear view

mirror unit will be heard.

If a tapping noise cannot be heard,

press the switch 1 again until the

tapping noise can be heard from the

door mirror.

For vehicles equipped with the

driver’s seat with position memory,

you can enter a specific setting for

the rear view mirrors when reversing

and store the position.

1 4 8 - G e t t i n g t o k n o w y o u r v e h i c l e

REAR VIEW

With the vehicle at a standstill and

reverse gear engaged, select the

door mirror using one of the switch-

es 3 , then use the switch 2 to adjust

it to the required position.

Select "Recall".

When driving at night, to avoid being

dazzled by the headlights of the ve-

hicle behind, shift the small lever 4

located behind the rear view mirror.

The positions of the exterior rear

view mirrors in forward gear, reverse

and of the front seats are recalled.

2

Auto-dimming rear view mirror 5

Returning to the driving position

For safety reasons, car-

ry out any adjustments

while the vehicle is sta-

tionary.

It is possible to move from the re-

verse gear to a forward gear:

– approximately nine seconds after

the reverse gear has been disen-

gaged when the speed is lower than

6 mph (10 km/h);

Interior rear view mirror

Its position can be adjusted.

– with the forward gear engaged

when the speed is greater than 6

mph (10 km/h);

Rear view mirror with lever 4

– when the engine is stopped.

Position memory

– Adjust the door mirrors (see previ-

ous paragraphs);

– refer to the multimedia instruc-

tions to access the settings memory.

Save the settings.

The positions of the exterior rear

view mirrors in forward and reverse

gear, and the position of the driver's

seat are saved simultaneously.

The rear view mirror automatically

darkens when you are being fol-

lowed by a vehicle using main beam

headlights or in very bright lighting.

Camera rear view

Depending on the vehicle, your rear

view mirror may be fitted with a dis-

play of the rear surroundings trans-

mitted by the camera fitted behind

the rear screen.

Recalling the memorised posi-

tion

Refer to the multimedia manual to

access recall of the saved position.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 4 9

REAR VIEW

For more information, please see

ꢀ 150.

This function is an ad-

ditional aid. It cannot,

Camera rear view

Operating principle

therefore, under any

circumstances replace

the vigilance or the responsibili-

ty of the driver.

2

The driver should always be

ready for sudden incidents

while driving: always ensure

that there are no small, narrow

moving obstacles (such as a

child, animal, pushchair, bicycle,

stone, post, etc.) in the blind

spot when manoeuvring.

When the ignition is switched on, the

rear view mirror 2 mounted on the

roof centre console displays the

view behind the vehicle that is trans-

mitted by the camera 1 .

Adjusting the rear view mirror 2

If reflections reduce the visibility of

the view transmitted by the camera,

you can adjust the rear view mirror 2

to the left, right, upwards or down-

wards.

Note:

– the camera display 1 is transmit-

ted only if the rear view mirror is in

"screen" mode.

Depending on the vehicle, the rear

view may be displayed by the cam-

era 1 .

Direct rear view by mirror remains

available at all times.

The camera 1 is fitted behind the

rear screen, in the wiping area.

Make sure that the camera 1 is not

obscured (by dirt, mud, snow, con-

densation, etc.).

1 5 0 - G e t t i n g t o k n o w y o u r v e h i c l e

REAR VIEW

Operation

Switching off the function

Depending on your vision,

an adaptation time may

be necessary to focus on

the camera view display.

Objects which appear on the

edge of the door mirror 2 may

be distorted.

2

In very bright light (snow, vehi-

cle in sunshine, etc.), the cam-

era view may be partially dis-

turbed.

In low brightness or poor weath-

er, the image on the screen may

be distorted.

The camera's field of vision does not

cover the entire area behind the ve-

hicle, especially in the blind spot

area A .

The display switches off immediate-

ly after the ignition is switched off.

Note: the "mirror" mode can be acti-

vated using the lever 3 .

G e t t i n g t o k n o w y o u r v e h i c l e - 1 5 1

REAR VIEW

Operation

Adjusting the display and the

camera

d) adjusting the angle of rotation;

e) activating/deactivating the set-

tings menu display on the rear view

mirror;

2

f) selecting a language;

g) activating/deactivating button

backlighting.

Exit from the settings menu occurs

automatically after approximately

five seconds if no button is pressed.

For safety reasons,

carry out any adjust-

ments while the vehicle

is stationary.

Use the lever 3 to switch between

Adjust the system field of vision

and the door mirrors before dri-

ving. Be sure to adjust the cen-

tral rear view mirror before

switching to "screen" mode.

"mirror" mode and "screen" mode.

Press button 5 for "Menu" to access

the settings menu.

The green LED 4 as well as the pic-

togram displayed at the top right of

the rear view mirror indicates that

the screen mode is operating prop-

erly.

Repeatedly press buttons 6 and 7 to

scroll through the settings options.

Press the "OK" button 8 to access

the desired setting.

It disappears if you switch to "mir-

ror" mode or in the event of a fault.

Use buttons 6 and 7 " to adjust or ac-

tivate/deactivate the desired set-

ting.

Selecting the settings:

a) adjusting the brightness;

Each time the vehicle is

started, the function re-

turns to the settings

b) adjusting the vertical viewing an-

gle;

saved at the last engine stop.

c) adjusting the horizontal viewing

angle;

1 5 2 - G e t t i n g t o k n o w y o u r v e h i c l e

REAR VIEW

Special features related to the

reverse gear

Operating faults

2

When the system detects an operat-

When the vehicle is reversing, pay

attention to the images transmitted

by the reversing camera (multime-

dia screen 9 ) in addition to the infor-

mation available through the rear

view mirror ꢀ 275 as there remains a

rear view blind spot.

ing fault, the rear view mirror 2 turns

black, the symbol

displayed at

the top right of the rear view mirror

disappears and the LED 4 goes out.

This may be caused by a fault af-

fecting the camera or screen (clear-

ness, fixed image, delayed commu-

nication etc.).

If the black background persists,

switch to "mirror" mode and consult

an approved dealer.

G e t t i n g t o k n o w y o u r v e h i c l e - 1 5 3

Getting to know your vehicle -> Rear view for Your Renault Scenic 4 Door Fifth Generation (2023-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals