Get Keys and Doors -> Disabling Keyless Access Function Guide for Subaru Outback SUV Seventh Generation (2026)

(128,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

access key fob.

DISABLING KEYLESS ACCESS

FUNCTION

s02ap07

When the vehicle is not going to be used

for a long time, or when you choose not to

use the keyless access function, the

keyless access function can be disabled.

WARNING

If you have an implanted pacemaker

or an implanted defibrillator, perform

the procedure “By operating the dri-

ver’s door” �P127 to disable the

keyless access function. If you per-

form the procedure “By operating the

access key fob” �P126, the operation

of an implanted pacemaker or im-

planted defibrillator may be affected

by the radio waves from the transmit-

ting antennas installed on the vehicle.

NOTE

. If the access key is kept in or comes

near the vehicle, the system becomes

active and both the vehicle and access

key batteries’ energy will be con-

sumed. If this occurs frequently or

continuously, both the vehicle and

access key batteries can become fully

drained.

. The locking and unlocking function by

the remote keyless entry system is not

disabled.

. To start the engine while the functions

are disabled, perform the procedure

described in “Starting Engine”

�P452.

By operating the access key fob

s02ap0703

To disable the keyless access function by

operating the access key fob, register a

PIN code for PIN Code Access. For

details about registering a PIN code, refer

to “Unlock Using PIN Code Access”

�P122.

1. Open the driver’s door.

2. Rotate the lock lever forward.

S_204379-MW

3. Press and hold the “ ” button and

“

” button on the access key fob

simultaneously for more than 5 sec-

onds.

S_204380-MW

A chirp sound will be heard, and the

function will be disabled.

KEYS AND DOORS

126

(129,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

By operating the driver’s door

s02ap0704

S_204381-MW

To disable the keyless access function by operating the driver’s door, perform the

following procedures.

Steps Operation Time Status

1 Sit in the driver’s seat, and close the door. — Close

2 Push “

” on the power door locking switch. — Close

3 Open the driver’s door. Within 5 sec. Close?Open

Push “

” on the power door locking switch

twice.

Within 5 sec. Open

5 Close and open the driver’s door twice. Within 10 sec.

Open?Close?Open?

Close?Open

Push “

” on the power door locking switch twice

while the door is open.

Within 10 sec. Open

7 Close and open the driver’s door once. Within 10 sec. Open?Close?Open

8 Close the door. Within 5 sec.

Open?Close

A chirp will sound and the functions will be disabled.

NOTE

In steps 4 and 6, press the power door locking switch firmly. If the switch is not pressed

firmly, the functions may not be disabled.

– CONTINUED –

KEYS AND DOORS

127

(130,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

Enabling functions

s02ap0702

When the procedure to disable the func-

tions is performed again, a chirp sound

will be heard, and the functions are

enabled.

NOTE

. The keyless access function will be

enabled only if you perform the pro-

cedure in the same manner you

disabled the function (for example,

when disabling by operating the dri-

ver’s door, the function will not be

enabled even if you operate the

access key fob).

. Press the push-button ignition switch if

you do not know the procedure in

which the keyless access function was

disabled.

– When disabling by operating the

driver’s door: A chirp will not be

heard.

– When disabling by operating the

access key fob: A chirp will be

heard.

SELECTING AUDIBLE SIGNAL

OPERATION

s02ap12

Using an electronic chirp, the system will

give you an audible signal when the doors

are locked or unlocked. If desired, you

can turn the audible signal off by operat-

ing the center information display. For

details, refer to “Vehicle” �P206.

Furthermore, the volume setting of the

audible signal can also be changed by a

SUBARU dealer. Consult your SUBARU

dealer for details.

SELECTING HAZARD WARN-

ING FLASHER OPERATION

s02ap18

Using the hazard warning flasher, the

system will give you a visible signal when

the doors are locked or unlocked. If

desired, you can turn the hazard warning

flashers off by operating the center

information display. For details, refer to

“Vehicle” �P206. The setting can also be

changed by a SUBARU dealer. Consult

your SUBARU dealer for details.

WARNING CHIMES AND

WARNING INDICATOR

s02ap06

The keyless access with push-button

start system is equipped with a warning

chime and the access key warning

indicator in order to minimize improper

operations and help protect your vehicle

from theft.

For details, refer to “Warning Chimes and

Warning Indicator of the Keyless Access

with Push-Button Start System” �P176.

WHEN ACCESS KEY FOB

DOES NOT OPERATE PROP-

ERLY

s02ap08

Refer to “If Access Key Fob Does Not

Operate Properly” �P451.

REPLACING BATTERY OF AC-

CESS KEY FOB

s02ap09

Refer to “Replacing Battery of Access

Key Fob” �P507.

REPLACING ACCESS KEY FOB

s02ap13

Access key fobs can be replaced at

SUBARU dealers. For more details, con-

tact a SUBARU dealer.

KEYS AND DOORS

128

Keys and Doors -> Disabling Keyless Access Function for Your Subaru Outback SUV Seventh Generation (2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals