2026 Subaru Outback SUV Keys and Doors -> Memory Function (Power Rear Gate) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Keys and Doors -> Memory Function (Power Rear Gate) for Your Subaru Outback SUV Seventh Generation (2026)

(148,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
MANUAL OPERATION
s02au04
Opening the rear gate:
Lift the rear gate up to the midway
position. The rear gate will automatically
open from the midway position to the fully
open position.
Closing the rear gate:
S_204657-W
Pull down the rear gate when the rear
gate is opened. The rear gate will close
automatically.
This function is disabled as the factory
default setting. To use the function, it must
be enabled. Consult your SUBARU
dealer to have this function set to enabled
or disabled. When opening and closing
the rear gate with this function disabled,
make sure to use the power rear gate by
operating the button.
The rear gate can be lowered easily if you
pull down on the inside handle as shown
in the illustration.
CAUTION
. Never attempt to close the rear
gate by grabbing or pressing on the
outer metal surface or damage
may result.
. Always use the inside handle to
avoid damaging the exterior sur-
face of the gate.
NOTE
. If the rear gate is moved slowly, it may
not operate automatically open or
close.
. When leaving the vehicle, make sure
that all doors and the rear gate are
completely locked.
MEMORY FUNCTION
s02au06
The preferred rear gate height can be
registered.
Registration of the rear gate height:
1. Open the rear gate and stop it at the
preferable height.
2. Press and hold the power rear gate
button to register the height.
S_204658-W
Power rear gate button
An electronic chirp sounds for confirma-
tion.
The rear gate will stop at the registered
position when the memory function is on.
NOTE
. Register the rear gate height to turn on
the “Power Rear Gate Height Mem-
ory” automatically. Refer to “Vehicle”
�P206.
. To change the registered height, per-
form the registering procedure again.
. It is possible to register the height from
approximately 2 in (5 cm) or more from
the completely closed position.
KEYS AND DOORS
146
(149,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Deactivation of the memory function:
Deactivate the memory function to open
the rear gate fully. Perform either of the
following operation to deactivate the
memory function.
– Deactivate the “Power Rear Gate
Height Memory” function on the center
information display (CID). Refer to
“Vehicle” �P206.
– Register the position of the rear gate
at the fully open position.
Utilizing the memorized rear gate
height:
To open the rear gate and stop it at the
registered height, perform the following
procedure.
1. Check that “Power Rear Gate Height
Memory” is on. Refer to “Vehicle”
�P206.
2. Press and hold any of the power rear
gate buttons or briefly press the rear
gate opener button.
NOTE
The rear gate will open to the position that
is stored in the memory function even if
the rear gate is opened by the reverse
function.
REVERSE FUNCTION
s02au07
WARNING
. Do not let parts of your body get
caught when operating the reverse
function. If the reverse function
does not operate for some reason,
this may lead to serious injury or
accidents.
. The reverse function may not
operate if foreign objects are
caught in the rear gate just before it
closes completely. Be careful not to
catch your fingers and other body
parts.
. The reverse function may not
operate depending on the object
shape and the manner in which it
was caught. Be careful not to catch
your fingers and other body parts.
CAUTION
. If the reverse function is operated 3
times consecutively, automatic
opening and closing of the power
rear gate function will be canceled
and the rear gate will stop opening
or closing suddenly. However, the
rear gate may open or close
depending on the rear gate height
when automatic operation is
ceased. Be careful that the rear
gate does not hit anyone’s head or
face, etc. and that fingers and
baggage, etc. are not caught in it.
. Take care not to damage the touch
sensors. Otherwise, the reverse
function may cease to operate.
If, while opening or closing using power
rear gate, the rear gate catches persons
or baggage or hits an obstacle, an
electronic chirp will sound 3 times and the
rear gate will operate as follows.
When opening the rear gate:
The rear gate will automatically close.
When closing the rear gate:
The rear gate will automatically open.
S_204646-W
Touch sensor
– CONTINUED –
KEYS AND DOORS
147
2

Related Topics

Keyless Access with Push-Button Start System Safety Precautions (Keyless Access) Locking and Unlocking with "Keyless Access" Entry Function Unlock Using PIN Code Access Power Saving Function Power Saving Function of Access Key Fob Disabling Keyless Access Function Selecting Audible Signal Operation (Keyless Access) Selecting Hazard Warning Flasher Operation (Keyless Access) Warning Chimes and Warning Indicator (Keyless Access) When Access Key Fob Does Not Operate Properly (Keyless Access) Replacing Battery of Access Key Fob (Keyless Access) Replacing Access Key Fob Immobilizer Security Indicator Light (Immobilizer) Key Replacement Remote Keyless Entry System Locking the Doors Unlocking the Doors Unlocking the Rear Gate Setting Audible Signal Operation (Remote Keyless Entry) Selecting Hazard Warning Flasher Operation (Remote Keyless Entry) Vehicle Finder Function Sounding a Panic Alarm Replacing the Battery (Remote Keyless Entry) Replacing Lost Access Key Fobs Door Locks Locking and Unlocking from the Outside Locking and Unlocking from the Inside Automatic Door Locking/Unlocking Key Lock-In Prevention Function Battery Drainage Reduction Function Alarm System Alarm System Operation Arming the System Disarming the System Alarm System Setting If You Have Accidentally Triggered the Alarm System Child Safety Locks Windows Power Window Switches Operating the Window Locking the Passengers' Windows Initialization of Power Window Power Rear Gate Operating by the Power Rear Gate Button Operating by the Buttons on the Rear Gate Manual Operation (Power Rear Gate) Reverse Function (Power Rear Gate) Rear Gate Drop Prevention Function Selecting Audible Signal Operation (Power Rear Gate) Initialization of Power Rear Gate Moonroof (If Equipped) Moonroof Switches Sunshade

Popular Owner Manuals