北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The notifications regarding the map lights
and dome light are deactivated as the
factory setting. A SUBARU dealer can
activate the system. Contact your
SUBARU dealer for details.
ARMING THE SYSTEM
s02af04
The alarm system becomes armed when
the following operation is performed.
1. Close all windows and the moonroof (if
equipped) and turn the ignition switch
to the “OFF” position.
2. Carry the key and get out of the
vehicle.
3. Make sure that the engine hood is
locked.
4. Lock the doors using any of the
following methods.
. Locking using the remote keyless
entry system. For details, refer to
“Remote Keyless Entry System”
�P130.
. Locking using the keyless access
function. For details, refer to
“Locking the vehicle” �P121.
. Locking using the power door lock-
ing switch. For details, refer to
“Locking using power door locking
switch” �P133.
NOTE
S_204564-W
. All doors, the rear gate and fuel filler lid
will lock, an electronic chirp will sound
once, the hazard warning flashers will
flash once, and the security indicator
light will start flashing rapidly.
. If any of the doors or the rear gate is
not fully closed, an electronic chirp
sounds five times and the hazard
warning flashers flash five times to
alert you that the doors (or the rear
gate) are not properly closed. When
you close the door, doors will auto-
matically lock and the system will
automatically arm in 30 seconds.
5. Approximately 30 seconds later, the
system will enter surveillance state.
When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has
been armed for surveillance.
NOTE
. The system can be armed even if the
windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
. The 30-second standby time can be
eliminated if you prefer. Have it per-
formed by your SUBARU dealer.
. If any of the following actions is done
during the standby period, the system
will not switch to the surveillance state.
– Doors (including the rear gate) are
unlocked using the access key fob.
– Doors (including the rear gate) are
unlocked using the keyless access
function.
– Any door (including the engine
hood) is opened.
– Push-button ignition switch is
turned to the “ACC” position.
DISARMING THE SYSTEM
s02af05
Perform either of the following proce-
dures.
. Briefly press unlock/disarm button (for
less than 2 seconds) on the access
key fob.
. Carry the access key fob and perform
either of the following procedures.
– Grip the front door handle.
– Press the rear lock button.
– CONTINUED –
KEYS AND DOORS
137
2
English 
