Get Keys and Doors -> Unlock Using PIN Code Access Guide for Subaru Outback SUV Seventh Generation (2026)

(124,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

. Press the rear lock button.

An electronic chirp will sound once and

the hazard warning flashers will flash

once.

NOTE

After touching the door lock sensor to lock

all of the doors (including the rear gate), if

you touch the door lock sensor once more

to attempt the lock operation without first

unlocking the doors, nothing will happen,

even if the door lock sensor is touched. In

this case, perform the unlocking opera-

tion once first. You can then touch the

door lock sensor to lock the doors.

Unlocking the vehicle

s02ap0110

S_204642-W

Front door handle sensor

Rear gate opener button

To unlock the door, carry the access key

fob with you and perform one of the

following operations:

. Grip the door handle.

. Press the rear gate opener button.

An electronic chirp will sound twice and

the hazard warning flashers will flash

twice.

Door unlock selection function

s02ap0105

When you use the keyless access func-

tion to unlock the vehicle, gripping the

driver’s door handle or the front passen-

ger’s handle will cause trigger different

unlock operations as described below.

When the driver’s door handle is

gripped:

The driver’s door and the fuel filler lid will

unlock.

When the front passenger’s door

handle is gripped:

All the doors (including the rear gate) and

the fuel filler lid will unlock.

The settings can be changed with the

following methods.

. The setting can be changed by oper-

ating the center information display.

For details, refer to “Vehicle” �P206.

. The setting can be changed by a

SUBARU dealer.

UNLOCK USING PIN CODE AC-

CESS

s02ap21

S_204643-W

Rear lock button

While all the doors (including the rear

gate and the fuel filler lid) are locked, you

can unlock them without a key by press-

ing the rear lock button.

NOTE

PIN Code Access will be helpful if the key

is accidentally left in the vehicle. It is

recommended that a 5-digit security code

(PIN code) is registered.

KEYS AND DOORS

122

(125,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

Registration for a PIN code

s02ap2102

Steps Operation

Time from the previous

step

1 Turn off the ignition switch. —

2 Close all the doors (including the rear gate). —

Press and hold the “

” button on the access key fob,

then press and hold the rear lock button until a chirp

sounds intermittently.

—

4 Press the “

” button on the access key fob. Within 30 seconds

Input the PIN code using the rear lock button within 30

seconds after the chirp sound of step 4.

For example, to register “32468” as the PIN code,

perform the following procedure.

Within 30 seconds

(1) Press the button three times.

(2) After a chirp sounds once, press the button twice.

(3) After a chirp sounds once, press the button four times.

(4) After a chirp sounds once, press the button six times.

(5) After a chirp sounds once, press the button eight times.

Perform step 5 again within approximately 30 seconds

after the chirp starts sounding intermittently.

—

All doors will be unlocked and locked. Then the PIN code

will be registered.

—

NOTE

. Press the “

” button within 30 seconds of step 6 to end the preparation mode and

move on to the registration stage. Unless the “

” button is pressed within 30

seconds after step 6, the PIN code registration will be canceled.

. Press the rear lock button ten times to enter “0”.

. Change the PIN code frequently to protect your vehicle from theft.

. If you have lent your vehicle to another person, confirm that the PIN code has not

been changed or deleted. If the PIN code has been changed or deleted, reregister a

new PIN code.

. If you make an error during the registration procedure, press the “

” or “ ” button

on the access key fob. Then start over from step 1.

. To protect your vehicle from theft, you cannot register “00000” to “99999” or “12345”

as a PIN code.

. Do not register your vehicle license plate number or simple numbers such as

“11122” or “12121” as a PIN code. Doing so will increase the risk of vehicle theft.

. When you try to register “22222”, the registered PIN code will be deleted. You

cannot unlock the doors by PIN Code Access until a new code is registered.

. After registering a new PIN code, make sure that you can unlock the doors using the

PIN code.

. The PIN code cannot be deleted while the keyless access function is disabled by

operating the access key fob.

– CONTINUED –

KEYS AND DOORS

123

(126,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

. Reregister the PIN code in the following case.

– When you forget the PIN code

– When you want to change the PIN code

KEYS AND DOORS

124

(127,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

Unlocking

s02ap2103

Perform steps (1) to (5) of step 5

described in “Registration for a PIN

code”.

NOTE

. You cannot unlock by PIN Code

Access in the following cases.

– When the access key fob is within

the operating ranges

– When the ignition switch is in the

“ACC” or “ON” position

. If you make an operation error during

the unlocking procedure, start over

with the unlocking procedure after

waiting for 5 seconds or longer.

. To protect your vehicle from theft, a

buzzer will sound if incorrect PIN

codes are entered five times continu-

ously. If this occurs, you cannot unlock

the doors by PIN Code Access for 5

minutes.

POWER SAVING FUNCTION

s02ap23

To protect the access key fob battery and

the vehicle battery, the keyless access

function will be disabled as follows.

. When the keyless access function and

the remote keyless entry system have

not been used:

(1) 5 days after the push-button igni-

tion switch has been turned off,

communication between the an-

tennas and the access key fob will

be stopped.

(2) 9 days after step (1), the sensors

(both lock sensor and unlock

sensor) on the front passenger’s

door will be disabled.

. When the access key fob has been left

in the operating range for 10 minutes

or longer while all doors are locked,

the keyless access function will be

disabled.

Recovery from power saving

mode

s02ap2301

When one of the following operations is

performed, the keyless access function

will be recovered.

. Unlock by gripping the door handle

(only when the sensors on the front

passenger’s door are not disabled) or

pressing rear gate opener button on

the rear gate.

. Lock or unlock by the remote keyless

entry system.

. Open a door and then close it.

. Turn the push-button ignition switch to

the “ON” position.

POWER SAVING FUNCTION OF

ACCESS KEY FOB

s02ap26

This function stops the access key fob

from receiving signals and helps minimize

the battery consumption of the access

key fob.

1. Press the “

” button twice while

holding the “

” button.

2. Confirm that the LED indicator blinks 4

times to notify that the setting is

complete.

S_204473-W

LED indicator

When the access key fob is in the power

save mode, the keyless access function

and push-button start system will not be

available. To cancel the power save

mode, press one of the buttons on the

– CONTINUED –

KEYS AND DOORS

125

Keys and Doors -> Unlock Using PIN Code Access for Your Subaru Outback SUV Seventh Generation (2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals