07 Driver support
||
Before a speed can be set, the cruise control
system must be engaged (put in standby
mode).
Adjusting the set speed
After a speed has been set, it can be
Related information
Cruise control (CC) – introduction (p. 181)
•
increased or decreased by using the
buttons.
or
Cruise control (CC) – deactivating
(p. 183)
•
–
Press the CRUISE button (1).
>
1.
The symbol
illuminates and the text
Press
or
briefly and release the
(---) mph (5) indicates that cruise con-
trol is in standby mode.
button to increase or decrease vehicle
speed by approximately 1 mph or 1 km/h.
> This will become the set speed when
the button is released.
NOTE
Putting cruise control in standby mode
does not set a cruising speed.
2. Press and hold one of these buttons to
increase/decrease the speed in 1-mph or
1-km/h increments. Release the button
when you have reached the desired
speed.
Setting a speed
Use the or buttons set the vehicle's
current speed. The set speed is shown in the
display.
NOTE
A temporary increase in speed by
•
NOTE
pressing the accelerator pedal, for less
than 1 minute (e.g. when passing
another car), does not affect the cur-
rent cruise control setting. The vehicle
will automatically return to the previ-
ously set speed when the accelerator
pedal is released.
Cruise control cannot be engaged at
speeds below 20 mph (30 km/h).
If one of the cruise control buttons is
07
•
kept depressed for more than approx.
1 minute cruise control is disengaged.
The engine must then be switched off
in order to reset cruise control.
182
English 
