07 Driver support
Ice and snow covering the sensors may
cause incorrect warning signals.
Activating/deactivating
The system is activated automatically when
the vehicle is started.
Park assist – limitations
Cleaning the sensors
The sensors must be cleaned regularly to
ensure that they work properly. Clean them
with water and a suitable car washing deter-
gent.
NOTE
–
Press the Park assist button on the center
console to temporarily deactivate the sys-
tem(s).
If the sensors are obstructed by e.g., dirt,
snow, or ice, this could result in false
warning signals from the park assist sys-
tem.
> The indicator light in the button will go
out when the system has been deacti-
vated.
Related information
Park assist – introduction (p. 232)
Park assist will be automatically reactivated
the next time the engine is started, or if the
button is pressed (the indicator light in the
button will illuminate).
•
Park assist – function (p. 232)
•
Park assist – operation (p. 234)
•
•
•
Park assist – troubleshooting (p. 236)
NOTE
Rear Park Assist Camera (PAC) – function
(p. 237)
Park assist is disengaged automatically
when the parking brake is applied.
Location of the front sensors
Related information
Park assist – introduction (p. 232)
•
Park assist – limitations (p. 235)
•
Park assist – function (p. 232)
•
Park assist – troubleshooting (p. 236)
•
Rear Park Assist Camera (PAC) – function
(p. 237)
•
07
Location of the rear sensors
235
English 
