07 Driver support
Collision warning – troubleshooting
(p. 218)
The camera’s limitations
The camera has the same limitations as the
human eye.
•
•
•
WARNING
The camera has the same type of limi-
tations as the human eye, i.e., it can-
not see as well in heavy snowfall or
rain, thick fog or in heavy blowing dust
or snow. In such conditions, systems
depending on the camera may experi-
ence greatly reduced functionality or
may be temporarily deactivated.
•
Collision warning – symbols and mes-
sages (p. 220)
The camera is used by Pedestrian and Cyclist
Detection with Full Auto Brake Collision warn-
ing – introduction (p. 209), Active High Beams
(Active high beams (AHB)* (p. 90)), Road Sign
Information (Road Sign Information (RSI)* –
introduction (p. 179)) and Driver Alert System
(Driver Alert System (p. 222)) with Lane
Road Sign Information (RSI)* – introduc-
tion (p. 179)
Driver Alert System (p. 222)
•
•
Active high beams (AHB)* (p. 90)
Never place any objects, decals, etc.,
on the windshield in front of the cam-
era. This could reduce or block the
camera’s function, and could cause
one or more of the systems that utilize
the camera to stop functioning.
•
•
Departure Warning or Lane Keeping Aid.
NOTE
To help protect the camera in very hot
•
conditions, it may be temporarily
switched off for approximately 15
minutes after the engine has been
started.
Strong sunlight, reflections from the
road surface, ice or snow covering the
road, a dirty road surface, or unclear
lane marker lines may drastically
reduce the camera’s capacity to
detect the side of a lane, a pedestrian,
a cyclist or another vehicle.
Keep the section of the windshield in
front of the camera clean and free of
ice, snow, or condensation.
•
Related information
Collision warning – introduction (p. 209)
•
Collision warning* – function (p. 211)
07
•
Collision warning* – operation (p. 212)
•
Collision warning* – Pedestrian detection
(p. 214)
•
Collision warning* – Cyclist detection
(p. 213)
•
Collision warning* – limitations (p. 215)
•
217
* Option/accessory, for more information, see Introduction.
English 
