Caddy California -> Gas cooker for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

Check that the gas hose is screwed securely onto the pressure regulator and onto the transition piece to the gas  
pipe. Make sure that the connections are airtight.  
1
3
Connect the pressure regulator→ Fig. 1  
with the union nut→ Fig. 1  
to the cylinder safety valve by turning  
it anti-clockwise.  
Check that the pressure regulator is properly screwed on to the cylinder safety valve and that the connection is  
airtight.  
Make sure that the gas hose is positioned without impediment and that it is not pinched or damaged at any point.  
Changing the gas cylinder  
First read the section on “Preparing to connect the gas cylinder” and follow the instructions carefully.  
2
Make sure that the cylinder safety valve→ Fig. 1  
is completely closed. This prevents gas from escaping  
3
accidentally when the union nut → Fig. 1  
is loosened.  
Completely unscrew the union nut of the pressure regulator from the cylinder safety valve by turning it clockwise.  
Loosen the securing strap.  
Remove the gas cylinder.  
Connect a new gas cylinder → Connecting a gas cylinder.  
DANGER  
Leaking gas can cause an explosion.  
If you smell gas while connecting the gas cylinder, take the following actions immediately:  
Ensure there is no source of fire, spark or open flame in the vicinity.  
Close the safety valve on the gas cylinder.  
Open doors and windows to air out the vehicle.  
If the source of the gas smell cannot be eliminated, do not connect the gas cylinder. Have the gas system  
checked by a qualified workshop.  
The gas system doesnot need to be checked when a gas cylinder is  
changed.  
Gas cooker  
Fig. 1 Gas cooker: controls on the mini-kitchen.  
333  
1
2
3
Burner.  
Piezo igniter.  
Control knob of the burner.  
Read the following information before using the gas cooker for the first time (→ Gas system).  
Using the gas cooker  
When using the gas cooker for the first time, you may smell gas briefly.  
Open all the gas shut-off valves before cooking.  
1
The pan supports on the gas cooker→ Fig. 1  
cleaning.  
are simply wedged into place and can easily be removed for  
Use only dry oven gloves and cloths when handling hot pots and pans→  
.
Turning on the gas flame  
Moisture and dirt can hamper the spark discharge→ Ignition spark.  
Assemble the hob (→ Folding mini fridge).  
Open the safety valve on the gas cylinder (→ Gas system).  
Open the gas shut-off valve (→ Gas system).  
Fold up the cover.  
3
Push in the control knob→ Fig. 1  
for the hob and turn it to the small flame symbol.  
2
Push in and hold the control knob and keep pressing the piezo igniter→ Fig. 1  
until the gas has been lit.  
Continue to press and hold the control knob for about 15 seconds to prevent the gas flame from going out again.  
Release the control knob.  
Use the control knob to set the gas flame to the desired strength.  
If you let go of the knob too quickly, the gas flame goes out. Then re-light the burner  
Energy-efficient usage  
For maximum energy efficiency when using the cooker, please follow these suggestions:  
Use pots and pans with a diameter of 16 – 20 cm.  
Use pots and pans with flat(not convex) bottoms.  
Centre pots and pans over the flame.  
The gas flame should not extend around the edge of the pot or pan.  
Turning off the gas flame  
Turn the control knob for the gas flame to the symbol showing the filled circle.  
Close the gas shut-off valve.  
Close the safety valve on the gas cylinder.  
Remove all objects from the gas cooker and allow the cooker to cool fully.  
Close the hob (→ Folding mini fridge).  
334