FOX 2004 ➤
3 - Cyl. injection engine - Edition 12.2009
♦ Install clean parts only: Remove parts from the packaging im‐
mediately before installation. Do not use parts that have been
kept out of the packaging (for example, in tool boxes).
♦ With system open: Do not work wit compressed air. Do not
move the vehicle.
1.4
Fuel pump (pre-supply pump) -G6- - re‐
move and install
Special tools and workshop equipment required
♦ Spanner -VW 5321/9- or Spanner -T10334-
♦ Torque wrench - 40 to 200 Nm (enc. 1/2") -VAG 1332-
lk
1.4.1
Removal
– Take safety precautions before starting removal works
⇒ page 65 .
– Follow cleaning rules ⇒ page 65 .
– First, check if the vehicle has code radio; if so, check the re‐
spective anti-theft code.
– With ignition off, disconnect earth strap from Battery -A- .
– Fold rear seat forwards.
– Remove Fuel pump (pre-supply pump) -G6- access cover.
WARNING
Fuel supply hose is under pressure. Before loosening hose
junctions, place a cloth around them. Next, eliminate pressure
by removing hose carefully.
– Remove return -1- and supply -2- pipes and connector -3- from
Fuel pump (pre-supply pump) -G6- .
66
Rep. Gr.20 - Supply system - tank, Fuel pump (pre-supply pump) G6
English 
