2002-2010 Volkswagen Touareg SUV Crankshaft group -> 1.2 Assembly overview - part II, cylinder block User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Crankshaft group -> 1.2 Assembly overview - part II, cylinder block for Your Volkswagen Touareg SUV First Generation (2002-2010)

Touareg 2003 ➤  
8-cylinder injection engine - Edition 11.2011  
1.2  
Assembly overview - part II, cylinder block  
1 - 10 Nm  
2 - Cover  
❑ With connection for  
crankcase breather  
3 - Connecting hose  
❑ For crankcase ventila‐  
tion.  
4 - Clip  
5 - Baffle plate  
❑ With seal.  
❑ Renew.  
6 - Oil return supply valve  
❑ For cylinder head, right  
7 - O-ring  
❑ Renew.  
8 - 20 Nm  
❑ The specified torque in‐  
fluences the function of  
the knock sensor.  
9 - Knock sensor 1 (G61)  
10 - Knock sensor 2 (G66)  
11 - Plug, 35 Nm  
12 - Seal  
❑ Renew.  
13 - Engine bracket  
❑ Engine bracket and  
specified torques  
⇒ page 18  
1
14 - 40 Nm + / turn (90°) fur‐  
4
ther  
❑ Renew.  
15 - Banjo bolt, 30 Nm  
16 - 10 Nm  
17 - Coolant drain pipe  
18 - Cylinder block  
19 - Thermostat  
❑ Removing and installing ⇒ page 89  
20 - Thermostat housing  
21 - Oil return supply valve  
❑ For cylinder head, left  
1. Dismantling and assembling engine  
17  
Touareg 2003 ➤  
8-cylinder injection engine - Edition 11.2011  
Specified torque for engine bracket  
Specified torque for securing bolt -1-: 60 Nm.  
Specified torque for securing nut -2-: 75 Nm.  
1.3  
Removing and installing poly V-belt  
Special tools and workshop equipment required  
♦ Locking pin -T10060 A-  
Removing poly V-belt  
– Remove noise insulation tray.  
– Mark direction of rotation of poly V-belt.  
lk  
– Turn spanner clockwise until tensioning element can be  
locked using locking pin -T10060 A- .  
– Remove poly V-belt.  
Installing poly V-belt  
Note  
♦ Before installing poly V-belt, ensure that all ancillary assem‐  
blies (alternator, air conditioner compressor, vane pump) are  
secured tightly.  
♦ Check that idler roller turns easily.  
♦ When installing poly V-belt, check direction of belt rotation and  
proper seating of belt in pulleys.  
18  
Rep. gr.13 - Crankshaft group  

Related Topics

Crankshaft group
1 Dismantling and assembling engine 1.1 Assembly overview - part I, toothed belt drive 1.3 Removing and installing poly V-belt 1.4 Checking alignment of poly V-belt 2 Removing and installing sealing flange and drive plate 2.1 Assembly overview 2.2 Removing and installing drive plate 2.3 Removing and installing sealing flange at drive plate end 2.4 Renewing crankshaft oil seal, vibration damper end

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot