Get Crankshaft group -> 1.4 Checking alignment of poly V-belt Guide for Volkswagen Touareg SUV First Generation (2002-2010)

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

– Fit poly V-belt as illustrated.

After completing repairs always:

– Start engine and check that belt runs properly.

1.4

Checking alignment of poly V-belt

Note

Alignment of poly V-belt must always be checked to prevent dam‐

age if power-assisted steering vane pump, air conditioning sys‐

tem compressor or the respective brackets for power-assisted

steering or air conditioning system compressor have been re‐

newed.

Special tools and workshop equipment required

♦ Aligning gauge -3201-

♦ Torque wrench (5…50 Nm) -V.A.G 1331-

Procedure

– Remove power-assisted steering vane pump pulley.

– Remove poly V-belt ⇒ page 18 .

1. Dismantling and assembling engine

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

– Remove idler roller -1-.

– Position aligning gauge -3201- on air conditioning system

compressor belt pulley.

Note

The air conditioning system compressor pulley must align with the

power-assisted steering vane pump pulley.

If belt pulleys do not align

– Compensate misalignment of pulleys using shims with thick‐

nesses of 0.6, 0.8, 1.0, 1.2, and 1.4 mm.

– Check alignment of belt pulleys again with aligning gauge

-3201-

– Install idler roller. Specified torque: 25 Nm

– Install poly V-belt ⇒ page 18 .

– Tighten power-assisted steering belt pulley securing bolts to

22 Nm.

Rep. gr.13 - Crankshaft group

Crankshaft group -> 1.4 Checking alignment of poly V-belt for Your Volkswagen Touareg SUV First Generation (2002-2010)