Get Crankshaft group -> 1.3 Removing and installing poly V-belt Guide for Volkswagen Touareg SUV First Generation (2002-2010)

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

Specified torque for engine bracket

Specified torque for securing bolt -1-: 60 Nm.

Specified torque for securing nut -2-: 75 Nm.

1.3

Removing and installing poly V-belt

Special tools and workshop equipment required

♦ Locking pin -T10060 A-

Removing poly V-belt

– Remove noise insulation tray.

– Mark direction of rotation of poly V-belt.

– Turn spanner clockwise until tensioning element can be

locked using locking pin -T10060 A- .

– Remove poly V-belt.

Installing poly V-belt

Note

♦ Before installing poly V-belt, ensure that all ancillary assem‐

blies (alternator, air conditioner compressor, vane pump) are

secured tightly.

♦ Check that idler roller turns easily.

♦ When installing poly V-belt, check direction of belt rotation and

proper seating of belt in pulleys.

Rep. gr.13 - Crankshaft group

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

– Fit poly V-belt as illustrated.

After completing repairs always:

– Start engine and check that belt runs properly.

1.4

Checking alignment of poly V-belt

Note

Alignment of poly V-belt must always be checked to prevent dam‐

age if power-assisted steering vane pump, air conditioning sys‐

tem compressor or the respective brackets for power-assisted

steering or air conditioning system compressor have been re‐

newed.

Special tools and workshop equipment required

♦ Aligning gauge -3201-

♦ Torque wrench (5…50 Nm) -V.A.G 1331-

Procedure

– Remove power-assisted steering vane pump pulley.

– Remove poly V-belt ⇒ page 18 .

1. Dismantling and assembling engine

Crankshaft group -> 1.3 Removing and installing poly V-belt for Your Volkswagen Touareg SUV First Generation (2002-2010)

Related Topics

Crankshaft group

Popular Owner Manuals

Latest Owner Manuals