Advertisement

Advertisement

Opening and closing -> Boot lid with Easy Open motion sensor for Your Volkswagen Transporter Van Seventh Generation (2021-2025)

2. Press the open boot lid up by hand to the stop. You will need to use increased force to do this.  
3. Press the button in the open boot lid for at least three seconds.  
The opening angle is reset to the factory setting and stored.  
The hazard warning lights flash and an acoustic signal sounds to confirm that the data has been stored.  
WARNING  
Serious injuries can occur if the boot lid is opened or closed incorrectly or without due care and attention.  
Never open the boot lid if it is covered by a large amount of snow or a load is attached to it. The boot lid may  
close under its own weight due to the additional load and cause serious injuries.  
Remove the snow or load before opening the boot lid.  
It may not be apparent that the boot lid is unlocked, for example when a loaded luggage carrier is attached to it. If  
unlocked, the boot lid may open suddenly while the vehicle is in motion.  
When closing the boot lid, make sure that no-one has their hands in the direct path of the boot lid as it moves.  
WARNING  
The Park Distance Control sensors cannot overcome system-related vehicle limitations.  
When opening the boot lid electrically, always monitor the area around the vehicle as small children, animals and  
objects will not always be detected by the Park Distance Control sensors.  
Certain surfaces of objects and clothes cannot reflect the signals from the sensors. The system is unable to  
detect these objects or people wearing this type of clothing as an obstacle, or they may be detected incorrectly.  
External sound sources may affect the signals of the sensors. This may prevent the system from recognising  
people or objects.  
Before opening or closing the boot lid, check whether there is enough clearance to open or close the boot lid,  
e.g. in garages.  
If the instrument cluster or infotainment system indicates that the Park Distance Control sensors are faulty,  
the sensors can no longer detect people or objects.  
Boot lid with Easy Open motion sensor  
Fig. 1 Sensor-controlled luggage compartment opener  
(Easy Open).  
118  
Fig. 2 Boot lid: Motion sensor for opening with Easy Open.  
The boot lid can be unlocked and opened with a foot movement if there is a valid vehicle key within the operating  
range of the boot lid (→ Keyless Access).  
1. Stand behind the vehicle. The sensor is located on theleft side of the vehicle under the bumper→ Fig. 2.  
2. Make a quick kicking movement with your foot and shin towards the bumper. The shin must be located in the  
1
upper sensor area and the foot in the lower area → Fig. 1  
.
2
3. Then quickly move your foot and shin away from the sensor area again  
Visual feedback is provided via the turn signals. The boot lid opens.  
.
During heavy rain, after driving through water or after washing the vehicle, the function of the sensor may be  
impaired.  
Activating or deactivating Easy Open  
Easy Open can be activated and deactivated in the Infotainment system:  
1. Select the Vehicle menu.  
2. Select the Exterior submenu.  
3. Swipe sideways and activate or deactivate Easy Open.  
Or:  
1. Swipe sideways and select theCentral locking menu option.  
2. Scroll down the list and activate or deactivate Easy Open.  
If Easy Open is activated, Easy Close is also active, depending on the vehicle equipment (→ Boot lid, automatic (Easy  
Close)).  
The Easy Open function is available only when Keyless Access is activated .  
CAUTION  
If a valid vehicle key is located close to the boot lid, the Easy Open function can sometimes be operated accidentally,  
causing the boot lid to open, e.g. when sweeping underneath the rear bumper, if a powerful jet of water or steam is  
directed at the bumper, or if maintenance and repair work is carried out in the area around the rear bumper. If the  
boot lid is opened by mistake it can injure anyone in its path and cause material damage.  
Always make sure that there are no valid vehicle keys left unattended in the operating range of the boot lid.  
Always switch off the Easy Open function via the Infotainment system before any maintenance or repair work is  
carried out.  
Always switch off the Easy Open function via the Infotainment system before washing the vehicle.  
Always switch off the Easy Open/Easy Close function via the Infotainment system before fitting a bicycle carrier  
119  
or attaching a trailer .  
Closing the boot lid automatically with Easy Close  
Fig. 1 Boot lid with sensor-controlled closing(Easy Close).  
Fig. 2 Boot lid: Motion sensor for closing with Easy Close.  
The Easy Close function can be activated only if there is a valid vehicle key in the operating range of the boot lid  
(→ Keyless Access).  
1. Make a quick kicking movement with your foot and shin towards the bumper→ Fig. 2. The shin must be located  
1
in the upper sensor area and the foot in the lower area → Fig. 1  
.
2
2. Then quickly move your foot and shin away from the sensor area again  
.
Easy Close is activatedfor around 20 seconds. An acoustic signal will sound to confirm activation.  
The boot lid will be closed as soon as all valid vehicle keys have been removed from the operating range of the boot  
lid.  
The boot lid will lock again automatically, provided that the vehicle had been locked beforehand and as long as there  
is no valid vehicle key inside the vehicle.  
Easy Close allows a maximum of one vehicle key to be locked into the boot.  
The closing operation will be interrupted as soon as a vehicle key comes within the operating range again. The boot  
lid will then open again.  
During heavy rain, after driving through water or after washing the vehicle, the function of the sensor may be  
impaired.  
Activating or deactivating Easy Close  
The Easy Close function can be activated and deactivated together with the Easy Open function in theVehicle menu  
in the Infotainment system (→ Boot lid, automatic (Easy Open)).  
120