Activating single door unlocking in the central locking settings in the Infotainment system may restrict automatic
unlocking.
Unlocking and opening the sliding door
The vehicle is unlocked if you press the button in the sliding door handle when the vehicle is locked.
If the vehicle is equipped with electric sliding doors, the corresponding sliding door opens automatically.
Unlocking the boot lid
The boot lid is automatically unlocked if the vehicle is locked and a vehicle key is located in the operating range of the
boot lid and the automatic unlock function is set.
If the Passive Entry function is set, the boot lid unlocks only after it has been opened using the handle on the boot lid
(→ Boot lid, mechanical).
Locking the vehicle
You can only lock the vehicle using the front door handles, not the sliding door handle.
1. Park the vehicle.
B
2. Tap the sensor → Fig. 1
on the outside of the door handle.
All turn signals flash once.
The unlock function is deactivated for a few seconds so that you can check that the vehicle has been locked properly.
Temporarily deactivating the keyless locking and starting system Keyless Access
You can deactivate Keyless Access temporarily to prevent unauthorised third parties from unlocking and starting the
vehicle:
1. Lock the vehicle with the button in the vehicle key.
B
2. Tap the sensor on the outside of the door handle once within five seconds→ Fig. 1
door handle.
. Do not reach into the
Keyless Access is deactivated temporarily.
3. Check deactivation, wait ten seconds and pull the door handle again.
It should not be possible to open the door.
When the vehicle is next unlocked, it can be unlocked only using the vehicle key. The keyless locking and starting
system Keyless Access is reactivated the next time the vehicle is unlocked.
Permanently deactivating Keyless Access
You can deactivate Keyless Access permanently in the Infotainment system to prevent the vehicle from being
unlocked and started by unauthorised third parties:
Troubleshooting
Keyless Access not working
The sensors may have limited functionality if they become very dirty or icy.
1. Clean the sensors.
97
English 