2020-2024 Cupra Formentor SUV Driving -> Operating mode selection User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Operating mode selection for Your Cupra Formentor SUV First Generation (2020-2024)

Start and driving  
Vehicle sound: Fault! Pedestrians can-  
not hear the vehicle. Visit a workshop  
Press button on the control panel of the  
The combustion engine starts when a kick-  
down occurs in E-MODE. However, E-MODE  
remains activated.  
upper centre console.  
Press the E-Mode or Hybrid function but-  
The warning lamp lights up yellow.  
ton in the infotainment system.  
Hybrid (use the battery's charge)1)  
There is a vehicle sound fault. Drive with ut-  
most care, as other road users may not be  
able to hear the electric vehicle. Go immedi-  
ately to a specialised workshop to have the  
fault repaired.  
Further information about the operating  
mode can be found in .  
This is the operating mode that allows you to  
save most fuel.  
E-MODE (electric driving)1)  
The operating mode control unit tries to  
make the most of the battery charge. For this  
purpose, with active directions the naviga-  
tion data are also accessed.  
In the E-MODE electric driving mode, the ve-  
hicle basically drives in electric only mode.  
To the extent possible, the vehicle's com-  
bustion engine is not used.  
Operating mode selection  
In this operating mode, the electric motor  
and the combustion engine share the work  
of driving the vehicle.  
Operating mode selection  
All of the following conditions must be met  
for E-MODE to be activated:  
3 Valid for: hybrid vehicles  
In hybrid operating mode, the power from  
the battery charge is used optimally. If route  
guidance is activated, the vehicle may au-  
tonomously recharge the high-voltage bat-  
tery using the combustion engine.  
The high voltage battery has a sufficient  
charge level.  
The vehicle has different operating modes  
so that it can always be optimally adjusted to  
every situation while driving. Once the drive  
system has been turned on, and provided  
that all of the operating conditions required  
for this purpose have been met, the E-  
MODE operating mode is always activated in  
the first instance for electric driving.  
The vehicle speed is lower than 130 km/h  
(80 mph).  
The high voltage battery temperature is  
Manual control of the battery charge  
above -10°C.  
Manual control of the battery charge is only  
possible in Hybrid operating mode. The op-  
tion selected by the user is only valid until the  
ignition is switched off or the vehicle is  
switched to Hybrid mode or E-MODE.  
If, while driving in E-MODE mode, the neces-  
sary conditions are no longer met, the com-  
bustion engine starts and electric driving is  
suspended. In this case, the display lights  
up on the instrument cluster display.  
Operating mode selection  
»
Switch on the drive system page 211 .  
›››  
1)  
The displayed symbol varies depending on the  
active operating mode and the charge level of  
the high-voltage battery.  
213  

Related Topics

Popular Owner Manuals