2020-2024 Cupra Formentor SUV Driving -> Parking System Plus User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Parking System Plus for Your Cupra Formentor SUV First Generation (2020-2024)

Driving  
Parking aid plus assists the driver by giving  
visual and audio warnings about obstacles  
detected in front of and behind the vehicle.  
Parking Aid operation  
If you use high-pressure or vapour equip-  
ment for cleaning, do not apply it directly,  
unless you do so very briefly, and always  
keep a distance of more than 10 cm away.  
Manually connecting and disconnecting  
the parking aid  
The bumpers are fitted with sensors. When  
an obstacle is detected, it is indicated by au-  
dible signals and in the Infotainment system  
Fitting certain accessories to the front of  
Press the function button > Assistants >  
Parking > Park distance control.  
the vehicle, such as a plate holder with ad-  
vertising, may interfere with the operation  
of the Park Assist.  
Fig. 183.  
›››  
Automatic connection of Parking Aid  
When moving close to an obstacle, it is pos-  
sible to know if the obstacle is in front of the  
vehicle or behind it by choosing different  
sounds.  
We recommend that you practice parking  
Select reverse gear.  
in an area without traffic.  
OR: if you drive forward at a speed of less  
The volume and tone of the signals and  
than 15 km/h (9 mph) and you encounter an  
obstacle, it is detected when it is optically  
approx. less than 95 cm. away, or acoustical-  
ly approx. 50 cm. away. If the automatic con-  
nection is activated, a reduced display is  
shown.  
indications can be changed page 285 .  
›››  
Please observe information on towing a  
The approximate measurement range of the  
sensors is:  
trailer page 285 .  
›››  
A
1.20 m  
B
0.60 m  
OR: if the vehicle moves back a certain dis-  
Parking System Plus  
C
1.60 m  
tance (between approx. 10 and 20 cm ap-  
prox depending on whether or not an obsta-  
cle is detected)  
D
0.60 m  
Description  
As you approach the obstacle, the frequency  
of the audible signals will increase. The signal  
will sound continuously at around 0.30 m:  
Stop!  
Automatic disconnection of Parking Aid  
Drive forward at 15 km/h (9 mph) or faster.  
OR: press the parking lock button P.  
If the separation is maintained, the warning  
volume is reduced after about 2.5 seconds.  
Temporary suppression of sound in Park-  
ing Aid  
Press the function button.  
OR: activate the electronic parking brake.  
Fig. 183 Parking aid view on the Infotain-  
ment system display.  
282  
Help with parking and manoeuvring  
Change from reduced view to full view  
It only operates every time the speed is re-  
duced below 15 km/h (9 mph) for the first  
time.  
front are at a distance of less than 50 cm. ap-  
prox.  
Engage the reverse gear if your vehicle is  
equipped with a reversing camera.  
CAUTION  
If disabled using the button in the info-  
tainment system (> Assistants > Parking >  
Park distance control) to be automatically  
activated again, one of the following actions  
must be taken:  
OR: press the car icon on the reduced  
view.  
The automatic connection of the Parking  
Aid only works when you are driving slowly.  
If driving style is not adapted to the circum-  
stances, an accident and serious injury or  
damage may be caused.  
OR: if the vehicle moves back a certain dis-  
tance (between approx. 10 and 20 cm ap-  
prox depending on whether or not an obsta-  
cle is detected).  
Switch off the ignition and switch it on  
again.  
Switch to the reverse assist image (Rear  
View Camera “RVC”)  
OR: drive forward at over 15 km/h (9 mph)  
approx.  
Visual indication segments  
Select reverse gear.  
OR: activate or deactivate the parking lock  
button P  
OR: press the RVC button on the Infotain-  
ment System screen1)  
.
OR: switch the automatic activation on and  
off in the Infotainment system.  
A short confirmation signal will be heard and  
the button symbol will light up when the sys-  
tem is switched on.  
The automatic activation of the parking aid  
can be switched on and off in the Infotain-  
ment system page 85 page 89 :  
›››  
›››  
Automatic activation  
Switch the ignition on.  
Press the function button > Assistants >  
Fig. 184 Parking aid view on the Infotain-  
ment system display.  
When the Plus Parking Aid connects auto-  
matically, a diagram of the vehicle and the  
segments will appear on screen. This func-  
tion will be available unless the user has de-  
activated it.  
Parking > Park distance control.  
Select Automatic activation. If the box is  
The optical indication of the segments works  
as follows:  
checked, the function is connected.  
»
If activated automatically, an audible sound  
warning will only be given when obstacles in  
1)  
The RVC button will only be displayed when  
reverse gear is engaged.  
283  
Driving  
White and segments: the obstacle is  
more than approx. 30 cm away from the  
path or in the direction opposite to trav-  
el. They are also displayed when the  
electronic parking brake is activated.  
> Assistants > Parking > Park distance  
control:  
Trailer mode  
On vehicles with a factory-mounted trailer  
hook, when the trailer is connected, the rear  
sensors will not activate when reverse gear is  
engaged or button is pressed in the Info-  
tainment system (> Assistants > Parking >  
Park distance control). Therefore, any ob-  
jects behind or to the side of the vehicle will  
not be indicated on the screen and no audio  
signals will sound.  
Setup  
Automatic activa-  
On/off  
Yellow segments: the obstacles lie on  
the vehicle’s path and are at a distance  
of less than approx. 30 cm away.  
tion  
Volume in the front and rear  
area.  
Front volume  
Red segments: obstacles are less than  
approx. 30 cm away.  
Rear volume  
Volume in the rear area.  
When the parking aid is  
switched on, the volume of  
the audio source will be re-  
duced, depending on the se-  
lected option.  
A wake will indicate the anticipated forward  
or backward trajectory, depending on the  
engaged gear.  
The screen will only display objects detected  
at the front, and the vehicle's trajectory will  
be hidden.  
Adjust volume  
If an obstacle is located in the vehicle’s way,  
the corresponding audible warning will  
sound.  
Manoeuvre braking function  
Error messages  
When the penultimate segment is displayed,  
the vehicle has reached the collision zone. In  
the collision zone, the obstacles are repre-  
sented in red (including those out of the  
The emergency braking function is used to  
minimise damage in the event of a collision.  
If a an error or fault message appears on the  
instrument cluster in Park Assist, there is a  
fault.  
Depending on the equipment, if the Parking  
Aid is active, the braking while manoeuvring  
function activates emergency braking when  
it detects an obstacle in the vehicle’s path  
that could cause a collision, driving forwards  
or in reverse.  
path). Stop the vehicle!  
in Introduction  
›››  
If the fault doesn't disappear before discon-  
necting the ignition, it will not be indicated  
next time the parking aid is connected.  
on page 281,  
page 281 !  
in Introduction on  
›››  
If a rear sensor is faulty, only the obstacles in  
Setting the indications and audio  
signals  
A
B
the areas  
and  
are displayed Fig. 183 .  
The function will not brake if the Parking Aid  
is activated automatically. For the system to  
operate, manoeuvring speed must be be-  
tween 2.5-7 km/h (1.5-4 mph) for the front  
area and between 1.5-7 km/h (1-4 mph) for  
the rear.  
›››  
If a front sensor is faulty, only the obstacles in  
C
D
the areas  
and  
will be displayed. Symbol  
The indications and acoustic signals are set  
in the Infotainment system: function button  
is displayed.  
We recommend taking the vehicle to a spe-  
cialised workshop to have the fault repaired.  
284  

Related Topics

Popular Owner Manuals