Get FEATURES OF YOUR HYUNDAI -> AUTOMATIC HEATING AND COOLING CONTROL SYSTEM Guide for Hyundai Tucson SUV First Generation (2004-2009)

FEATURES OF YOUR HYUNDAI

107

AUTOMATIC HEATING AND COOLING CONTROL SYSTEM

B970A01Y-AAT

(If installed)

Your Hyundai is equipped with an auto-

matic heating and cooling control sys-

tem controlled by simply setting the

desired temperature.

B970B01JM

B970B02JM-GAT

Heating and Cooling Controls

1. Temperature Control Switch

2. Air Flow Control Switch

3. Display Window

4. Defroster Switch

5. Blower Fan Control Switch

6. AUTO (Automatic Control)Switch

7. OFF Switch

8. Air Conditioning Switch

9. Air lntake Control Switch

FEATURES OF YOUR HYUNDAI

108

NOTE:

o If the battery has been discharged

or disconnected, the temperature

mode will reset to Centigrade de-

grees.

This is a normal condition and

you can change the temperature

mode from Centigrade to Farenheit

as follows;

Press the "TEMP" down button

and "AUTO" button simulta-

neously for 3 secs. The display

shows that the unit of temperature

is adjusted to Centigrade or Fahr-

enheit.

(°C

→→

→°F or °F

→→

→°C)

B970C01JM-GAT

Automatic Operation

The FATC (Full Automatic Tempera-

ture Control) system automatically con-

trols heating and cooling by doing as

follows:

1. Push the "AUTO" button. The indica-

tor light will illuminate confirming that

the Face, Floor and/or Bi-Level

modes as well as the blower speed

and air conditioner will be controlled

automatically.

2. Push the "TEMP" button to set the

desired temperature.

The temperature will increase to the

maximum 32°C(90°F) by pushing the

" " button. Each push of the button

will cause the temperature to in-

crease by 0.5°C(1°F).

The temperature will decrease to the

minimum 17°C(62°F) by pushing the

" " button. Each push of the button

will cause the temperature to de-

crease by 0.5°C(1°F).

HJM2124-1

HJM2126-1

FEATURES OF YOUR HYUNDAI

109

B980B01Y-AAT

Fan Speed Control Switch

The fan speed can be set to the desired

speed by pressing the appropriate fan

speed control button. The higher the fan

speed is, the more air is delivered.

Pressing the "OFF" button turns off the

fan.

HJM2123-1

B980A01Y-AAT

MANUAL OPERATION

The heating and cooling system can be

controlled manually as well by pushing

buttons other than the "AUTO" button.

In this state, the system sequentially

works according to the order of buttons

selected.

The function of the buttons which are

not selected will be controlled automati-

cally.

Press the "AUTO" button in order to

convert to automatic control of the sys-

tem.

Photo sensor

HJM2086

o Never place anything covering the

sensor which is located on the

instrument panel to ensure better

control of the heating and cooling

system.

FEATURES OF YOUR HYUNDAI

110

B670C03Y-AAT

Air Intake Control Switch

This is used to select fresh outside air

or recirculation inside air.

To change the air intake control mode,

(Fresh mode, Recirculation mode) push

the control button.

FRESH MODE ( ) : The indicator

light on the button goes on when the air

intake control is fresh mode.

RECIRCULATION MODE ( ) : The

indicator light on the button is illumi-

nated when the air intake control is

recirculation mode.

With the "Fresh" mode selected, air

enters the vehicle from the outside and

is heated or cooled according to the

function selected.

With the "Recirculation" mode selected,

and air from within the passenger com-

partment will be drawn through the heat-

ing system and heated or cooled ac-

cording to the function selected.

NOTE:

It should be noted that prolonged

operation of the heating system in

"recirculation" mode will give rise to

fogging of the windshield and side

windows and the air within the pas-

senger compartment will become

stale. In addition, prolonged use of

the air conditioning with the "Recir-

culation" mode selected may result

in the air within the passenger com-

partment becoming excessively dry.

B670C01JM

B980D01Y-AAT

Heating and Cooling System Off

Press the "OFF" button to stop the

operation of the heating and cooling

system.

FEATURES OF YOUR HYUNDAI

111

HJM2114

Bi-Level

When selecting the "Bi-Level" mode,

the indicator light will come on and the

air will be discharged through the face

vents and the floor vents.

HJM2111

Face-Level

When selecting the "Face" mode, the

indicator light will come on, causing air

to be discharged through the face level

vents.

B980E01E-GAT

Air Flow Control

HJM2128-1

This is used to direct the flow of air. Air

can be directed to the floor, dashboard

outlets, or windshield. Four symbols

are used to represent Face, Bi-Level,

Floor and Floor-Defrost air position.

FEATURES OF YOUR HYUNDAI

112

HJM2113

HJM2112

Floor-Level

When selecting the "Floor-Level" mode,

the indicator light will come on and the

air will be discharged through the floor

vents, windshield defroster nozzle, side

defroster nozzle and side ventilator.

Floor-Defrost Level

When selecting the "Floor-Defrost"

mode, the indicator light will come on

and the air will be discharged through

the windshield defrost vents, the floor

vents and side defroster nozzle and

side ventilator .

B980F01JM-GAT

Defrost Switch

When the "Defrost" button is pressed,

the ( ) mode will be automatically

selected and the air will be discharged

through the windshield defrost nozzle,

side defroster nozzle and side ventila-

tor. To assist in defrosting, the air

conditioning will operate if ambient tem-

perature is higher than 2°C, and auto-

matically turns off if the ambient tem-

perature drops below 2°C.

HJM2138-1

FEATURES OF YOUR HYUNDAI -> AUTOMATIC HEATING AND COOLING CONTROL SYSTEM for Your Hyundai Tucson SUV First Generation (2004-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals