Get FEATURES OF YOUR HYUNDAI -> IMMOBILIZER SYSTEM Guide for Hyundai Tucson SUV First Generation (2004-2009)

FEATURES OF YOUR HYUNDAI

IMMOBILIZER SYSTEM

B880A01O-GAT

(If installed)

The immobilizer system is an anti-theft

device, designed to deter automobile

theft.

B030B01A-AAT

Record Your Key Number

A code number is stamped on the

number plate that came with the keys

to your Hyundai. This key number

plate should not be left with the keys

but kept in a safe place, not in the

vehicle. The key number should also

be recorded in a place where it can be

found in an emergency.

If you need additional keys, or if you

should lose your keys, your authorized

Hyundai dealer can make new keys if

you can supply the key number.

B030A01A-AAT

For greater convenience, the same

key operates all the locks in your

Hyundai. However, because the doors

can be locked without a key, carrying a

spare key is recommended in case

you accidentally lock one key inside

the car.

KEYS

OUN026060

OUN046100L

B885B04O-GAT

Keys

All of the locks fitted to the vehicle are

operated by the same key. However,

since it is possible to lock the doors

without the use of the key, care should

be exercised to ensure that the key

does not become locked inside the

vehicle by mistake.

B885B01JM

Master Key

FEATURES OF YOUR HYUNDAI

NOTE:

If you make your own duplicate key,

you will not be able to cancel the

system or start the engine.

CAUTION:

o The password should be re-

corded and kept in a safe place in

case the need to order further

keys arises.

o If you forget the password, con-

sult your authorized Hyundai

dealer.

o When starting the engine, do not

use the key with other immobi-

lizer keys around. Otherwise the

engine may not start or may stop

soon after it starts.

Keep each keys separately not to

have any malfunction after you

receive your new vehicle.

o Do not put metal accessories near

the key or ignition switch.

The engine may not start for the

metal accessories may interrupt

the transponder signal from nor-

mally transmitting.

B885C02A-GAT

Key Numbers

The vehicle key number is recorded

upon a metal tag attached to the keys

when the vehicle is first delivered to you.

The key number should be recorded and

kept in a safe place in case the need to

order further keys arises. New keys are

available from any Hyundai dealer by

quoting the relevant key number.

In the interest of security, the metal tag

attached to the keys which bears the key

number should be removed from the key

ring after you receive your new vehicle.

In addition, key numbers cannot be pro-

vided by Hyundai for security reasons.

If you need additional keys or if you

should lose your keys, your authorized

Hyundai dealer can make new keys.

OMC025002

WARNING:

In order to prevent theft of your ve-

hicle, do not leave spare keys any-

where in your vehicle. Your immobi-

lizer password is a customer unique

password and should be kept confi-

dential. Do not leave this number

anywhere in your vehicle.

FEATURES OF YOUR HYUNDAI

B880D01JM-GAT

Limp home procedures

(Gasoline Engine)

1. To set the password, you may turn

the ignition key "ON" and then turn

it "OFF" according to the digit num-

bers. For example, turn the ignition

key once for digit number "1", and

twice for "2", and so on. However,

for the digit number "0", you must

turn the ignition key for 10 times.

2. Wait for 3~10 seconds.

3. You may set the remaining number

of digits by following the same pro-

cedures 1 and 2.

4. If all of four digits have been tried

successfully, from this time, you

have to start your engine within 10

seconds. If you start your engine

after 10 seconds, your engine will

not start.

After doing the limp home procedure,

you have to consult with your autho-

rized Hyundai dealer as soon as pos-

sible.

CAUTION:

If you cannot start your engine in

spite of limp home procedure, have

your vehicle towed by an autho-

rized Hyundai dealer.

B885D01JM-GAT

Limp home procedures

(Diesel Engine)

In case the immobilizer warning indi-

cator blinks for five seconds when the

ignition key is turned to "ON" position,

this indicates that the immobilizer sys-

tem is out of order. And you cannot

start the engine without the limp home

procedures with ignition key.

The following procedure is how to start

the engine with the function of the limp

home (0, 1, 2, 3 as a sample pass-

word).

B885D01JM

B885D02JM

In case the immobilizer system is out of

order, you cannot start the engine

without the limp home procedures with

ignition key.

The following procedure is how to start

the engine with the function of the limp

home (0, 1, 2, 3 as a sample pass-

word).

NOTE:

You can get the limp home pass-

word when the vehicle is first deliv-

ered to you. If you do not have the

password, consult your authorized

Hyundai dealer.

Immobilizer warning indicator

FEATURES OF YOUR HYUNDAI

B030C01JM-AAT

ILLUMINATED IGNITION

SWITCH (If installed)

Whenever either front door is opened,

the ignition switch will be illuminated

for your convenience, provided the

ignition switch is not in the "ON" posi-

tion.

The light will go off approximately 10

seconds after closing the door or when

the ignition switch is turned on.

B030C01E-1

NOTE:

If the engine dies while driving after

limp home procedure, you can start

your engine within 8 seconds with-

out limp home procedure again.

5. If the immobilizer indicator blinks for

five seconds, you have to try the

limp home procedure again from

the beginning.

After doing the limp home procedure,

you have to consult with your autho-

rized Hyundai dealer as soon as pos-

sible.

CAUTION:

If you cannot start your engine in

spite of limp home procedure, have

your vehicle towed by an autho-

rized Hyundai dealer.

NOTE:

You can get the limp home pass-

word when the vehicle is first deliv-

ered to you. If you do not have the

password, consult your authorized

Hyundai dealer.

1. To set the password you may turn

the ignition key "ON" and then turn

it "OFF" according to the digit num-

bers, then the immobilizer indicator

will blink along with the operation of

the ignition key. For example, turn

the ignition key once for digit num-

ber "1", and twice for "2", and so on.

However, for the digit number "0",

you must turn the ignition key for 10

times.

2. Wait for 3~10 seconds.

3. You may set the remaining number

of digits by following the same pro-

cedures 1 and 2.

4. If all of four digits have been tried

successfully, turn the ignition key

"ON" and check that the immobi-

lizer indicator illuminates. From this

time, you have to start your engine

within 30 seconds. If you start your

engine after 30 seconds, your en-

gine will not start.

FEATURES OF YOUR HYUNDAI -> IMMOBILIZER SYSTEM for Your Hyundai Tucson SUV First Generation (2004-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals