2004-2009 Hyundai Tucson SUV FEATURES OF YOUR HYUNDAI -> THEFT-ALARM SYSTEM User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

FEATURES OF YOUR HYUNDAI -> THEFT-ALARM SYSTEM for Your Hyundai Tucson SUV First Generation (2004-2009)

1
FEATURES OF YOUR HYUNDAI
11
THEFT-ALARM SYSTEM
NOTE:
o When pushing the front portion
of the driver's or front passenger's
door lock switch, all vehicle doors
will lock. If any door is open when
the switch is depressed, the door
will remain locked when closed.
o When pushing the rear portion of
the switch, all vehicle doors will
unlock.
o The central door locking is oper-
ated by turning the key in the
driver's door lock toward the front
or rear of the vehicle.
o If the door is locked/unlocked mul-
tiple times in rapid succession
with either the vehicle key or door
lock switch, the system may stop
operating temporarily in order to
protect the circuit and prevent
damage to system components.
B070A01A-AAT
(If installed)
This system is designed to provide
protection from unauthorized entry into
the car. This system is operated in
three stages: the first is the "Armed"
stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage.
If triggered, the system provides an
audible alarm with blinking of the turn
signal lights.
B070B01O-AAT
Armed Stage
B070B02JM
UNLOCK
LOCK
Park the car and stop the engine. Arm
the system as described below.
1) Remove the ignition key from the
ignition switch.
2) Make sure that the hood and tail
gate are closed and latched.
3) Lock the doors using the transmitter
of the keyless entry system.
After completion of the steps above,
the turn signal lights will blink once to
indicate that the system is armed.
NOTE:
1) If any door, the tail gate or engine
hood remains open, the system
will not be armed.
2) If this happens, rearm the system
as described above.
CAUTION:
Do not arm the system until all
passengers have left the car. If the
system is armed while a
passenger(s) remains in the car,
the alarm may be activated when
the remaining passenger(s) leaves
the car.
!
1
FEATURES OF YOUR HYUNDAI
12
CAUTION:
Only the transmitter can disarm the
armed stage. If the transmitter does
not disarm the system, it is neces-
sary to take the following steps;
1. Unlock and open the door with the
key, which will cause the alarm to
be activated.
2. Insert the key in the ignition key
cylinder and turn the ignition key
to "START" position.
After completing the steps above,
the system will be disarmed.
!
B070D02JM
B070D02HP-AAT
Disarmed Stage
B070C01JM-AAT
Alarm Stage
The alarm will be activated if any of the
following occurs while the car is parked
and the system is armed.
1) A front or rear door is opened with-
out using the transmitter.
2) The tail gate is opened without us-
ing the transmitter.
3) The hood is opened.
The siren will sound and the turn signal
lights will blink continuously for about
30 seconds (E.C only/ Except E.C:
This will repeat 3 times). To turn off the
system, unlock the door or tail gate
with the transmitter.
The system will be disarmed when the
driver's or passenger's door is un-
locked by depressing the "UNLOCK"
button on the transmitter.
After completing the step above, the
turn signal lights will blink twice to
indicate that the system is disarmed.
If any door, tail gate or engine hood is
not opened within 30 seconds, the
system will be rearmed.
!
CAUTION:
Avoid trying to start the engine while
the system is armed.
1
FEATURES OF YOUR HYUNDAI
13
B070E02JM
B070F02A-GAT
KEYLESS ENTRY SYSTEM
(If installed)
Locking doors
1. Close all doors.
2. Push the 'LOCK' button on the trans-
mitter.
3. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Unlocking doors
1. Push the 'UNLOCK' button on the
transmitter.
2. At the same time all doors unlock,
the turn signal lights will blink twice
to indicate that the system is dis-
armed.
B070E03HP-GAT
Replacing the battery
When the transmitter's battery begins
to get weak, it may take several pushes
on the button to lock or unlock the
doors. Replace the battery as soon as
possible.
Battery type : CR2032
Replacement instructions:
1. Carefully separate the case with a
blade screwdriver as shown in the
illustration.
NOTE:
o The transmitter will not work if any
of following occur:
- The ignition key is in ignition
switch.
- You exceed the operating dis-
tance limit (10 m).
- The battery in the transmitter is
weak.
- Other vehicles or objects may
be blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a
radio transmitter such as a radio
station or an airport which can
interfere with normal operation
of the transmitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, con-
tact an authorized Hyundai Dealer.
o Keep the transmitter away from
water or any liquid. If the keyless
entry system is inoperative due to
exposure to water or liquids, it will
not be covered by your manufac-
turer vehicle warranty.

Related Topics

Popular Owner Manuals