2004-2009 Hyundai Tucson SUV FEATURES OF YOUR HYUNDAI -> CHILD RESTRAINT SYSTEM User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

FEATURES OF YOUR HYUNDAI -> CHILD RESTRAINT SYSTEM for Your Hyundai Tucson SUV First Generation (2004-2009)

1
FEATURES OF YOUR HYUNDAI
31
!
WARNING:
o A child restraint system must be
placed in the rear seat. Never
install a child or infant seat on
the front passenger's seat.
Should an accident occur and
cause the passenger side airbag
to deploy, it could severely in-
jure or kill an infant or child seated
in an infant or child seat. Thus,
only use a child restraint in the
rear seat of your vehicle.
o Since a safety belt or child re-
straint system can become very
hot if it is left in a closed vehicle,
be sure to check the seat cover
and buckles before placing a
child there.
o When the child restraint system
is not in use, store it in the lug-
gage compartment or fasten it with
a safety belt so that it will not be
thrown forward in the case of a
sudden stop or an accident.
CHILD RESTRAINT SYSTEM
B230A05P-GAT
(If installed)
Children riding in the car should sit in
the rear seat and must always be
properly restrained to minimize the
risk of injury in an accident, sudden
stop or sudden maneuver. According
to accident statistics, children are safer
when properly restrained in the rear
seats than in the front seat. Larger
children not in a child restraint should
use one of the seat belts provided.
You are required by law to use safety
restraints for children. If small children
ride in your vehicle you must put them
in a child restraint system (safety seat).
Child restraint systems are designed to
be secured in vehicle seats by lap belts
or the lap belt portion of a lap/shoulder
belt, or by a tether anchor and/or ISOFIX
anchors (if installed).
Children could be injured or killed in a
crash if their restraints are not properly
secured. For small children and ba-
bies, a child seat or infant seat must be
used. Before buying a particular child
restraint system, make sure it fits your
car and seat belts, and fits your child.
Follow all the instructions provided by
the manufacturer when installing the
child restraint system.
o Children who are too large to be in
a child restraint should sit in the
rear seat and be restrained with
the available lap/shoulder belts.
Never allow children to ride in the
front passanger seat.
o Always make sure that the shoul-
der belt portion of the outboard
lap/shoulder belt is positioned
midway over the shoulder, never
across the neck or behind the
back. Moving the child closer to
the center of the each seat may
help provide a good shoulder
belt fit. The lap belt portion of the
lap/shoulder belt or the center
seat lap belt must always be po-
sitioned as low as possible on
the child's hips and as snug as
possible.
o If the seat belt will not properly fit
the child, Hyundai recommends
the use of an approved booster
seat in the rear seat in order to
raise the child's seating height
so that the seat belt will properly
fit the child.
1
FEATURES OF YOUR HYUNDAI
32
After installation of the child restraint
system, rock the child seat back and
forth, and side to side to ensure that it
is properly secured by the seat belt.
If the child seat moves, readjust the
length of the seat belt. Then, if
equipped, insert the child restraint
tether strap hook into the child re-
straint hook holder and tighten to se-
cure the seat. Always refer to the child
restraint system manufacturer's rec-
ommendation before installing the child
restraint system in your vehicle.
o Never allow a child to stand up or
kneel on the seat.
o Never use an infant carrier or
child safety seat that "hooks"
over a seatback; it may not pro-
vide adequate security in an ac-
cident.
o Never allow a child to be held in
a person's arms while they are in
a moving vehicle, as this could
result in serious injury to the
child in the event of an accident
or a sudden stop. Holding a child
in a moving vehicle does not
provide the child with any means
of protection during an accident,
even if the person holding the
child is wearing a seat belt.
o If the child restaint seat is not
anchored properly, the risk of a
child being seriously injured or
killed in a collision greatly in-
creases.
B235G02JM
B235G01JM
B235G01Y-GAT
Installation on Center Rear Seats
2 point static type
3 point type
Use the center seat belt for the rear to
secure the child restraint system as
illustrated.
1
FEATURES OF YOUR HYUNDAI
33
!
NOTE:
o Before installing the child re-
straint system, read the instruc-
tions supplied by the child re-
straint system manufacturer.
o If the seat belt does not operate
as described, have the system
checked immediately by your
authorized Hyundai dealer.
WARNING:
Do not install any child restraint
system in the front passenger seat.
Should an accident occur and cause
the passenger's side airbag to de-
ploy, it could severely injure or kill
an infant or child seated in an infant
or child seat. Therefore, only use a
child restraint system in the rear
seat of your vehicle.
OCM019300
B230G02A-GAT
Installation on the Outboard Rear
Seats
To install a child restraint system on the
outboard rear seats, extend the shoul-
der/lap belt from its retractor. Buckle
the seat belt and allow the seat belt to
take up any slack. Make sure that the
lap portion of the belt is tight around the
child restraint system and the shoulder
portion of the belt is positioned so that
it cannot interfere with the child's head
or neck. After installation of the child
restraint system, try to move it in all
directions to be sure the child restraint
system is securely installed.
If you need to tighten the belt, pull more
webbing toward the retractor.
On outboard rear
seats
B230H02JM-GAT
Child Seat Restraint Suitability
For Seat Position Using The Seat
Belt
Use child safety seats that have been
officially approved and are appropriate
for your children.
When using the child safety seats,
refer to the following table.
Rear
Center
Age Group
Seating Position
L1, L2,
L3, L4
X
XX
XX
XX
Rear
Outboard
Front
Passenger
0 : Up to 10 kg
(0 ~ 9 months)
0+ : Up to 13 kg
(0 ~ 2 years)
I : 9kg to 18kg
(9 months ~
4 years)
II & III : 15kg to
36kg
(4 ~ 12 years)
X
L1, L2,
L3, L4
L3, L5,
L6, L7, L8
L6, L9
L1 : Suitable for Bebe confort ELIOS
(E2 037014) approved for the use
in this mass group
L2 : Suitable for PegPerego primo
Viaggio (E13 030010) approved
for the use in this mass group
1
FEATURES OF YOUR HYUNDAI
34
B230B02A-GAT
Using a Child Restraint System
with "Tether Anchorage" sys-
tem (If installed)
For small children and babies, the use
of a child seat or infant seat is strongly
recommended. This child seat or in-
fant seat should be of appropriate size
for the child and should be installed in
accordance with the manufacturer's
instructions. It is further recommended
that the seat be placed in the vehicle's
rear seat since this can make an im-
portant contribution to safety. Your
vehicle is provided with three child
restraint hook holders for installing the
child seat or infant seat.
L3 : Suitable for Bebe confort iSEOS
(E2 039014) approved for the use
in this mass group
NOTE:
Use it after adjusting headrest to
lowest level.
L4 : Suitable for GRACO Autobaby
(E11 03. 44.160/E11 03.44.161)
approved for the use in this mass
group
L5 : Suitable for Romer Lord Plus (E1
03301136) approved for the use in
this mass group
L6 : Suitable for Euro Kids Star
(E1 03301128/E1 03301129)
approved for the use in this mass
group
L7 : Suitable for BeSafe iZi COMFORT
(E4 03443206) approved for this
use in this mass group
NOTE:
Use it after removing headrest or
adjusting headrest to lowest level.
L8 : Suitable for MAXI-COSI Priori XP
(E1 03301153) approved for the
use in this mass group
L9 : Suitable for Bebe confort HiPSOS
(E2 031011) approved for this use
in this mass group
NOTE:
Use it after removing headrest.
X : Seat position not suitable for chil-
dren in this mass group
1
FEATURES OF YOUR HYUNDAI
35
B230C05JM
Tether
anchor cover
Child Restraint
Hook Holder
To install the child restraint seat
1. Open the tether anchor cover on the
rear luggage compartment floor.
B230C06O-GAT
Securing a child Restraint Sys-
tem with "Tether Anchorage"
System
Three child restraint hook holders are
located on the rear luggage compart-
ment floor.
B230C04JM
This symbol indicates the location of
each user ready tether anchorage.
Rear luggage compartment floor
B230B01JM
Front of Vehicle
Child
restraint
hook
holders
Tether strap
hook
1
FEATURES OF YOUR HYUNDAI
36
ISOFIX Anchor
Position Indicator
ISOFIX Anchor
OJM019034
On each side of the rear seat, between
the cushion and backrest, are located
a pair of ISOFIX anchorage points
together with a top tether mounting on
the luggage compartment. During the
installing, the seat has to be engaged
at the anchorage-points in a way you
can hear it clicking (check by pulling!)
and has to be fixed with the Top Tether-
belt on the belonging point in the lug-
gage compartment. The installing and
the use of a child-seat has to be done
according to the installing-manual,
which is added to the ISOFIX-seat.
2. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head-
rests, route the tether strap under
the headrest and between the head-
rest posts, otherwise route the tether
strap over the top of the seatback.
3. Connect the tether strap hook to the
child restraint hook holder and
tighten to secure the seat.
!
WARNING:
Install the Child Restraint Seat fully
rearward against the seatback, with
the seatback reclined two positions
from the most upright latched posi-
tion.
B230D02JM-GAT
Using a Child Restraint System
with "ISOFIX" System and
"Tether Anchorage" System
ISOFIX is a standardised method of
fitting child seats that eliminates the
need to use the standard adult seat
belt to secure the seat in the vehicle.
This enables a much more secure and
positive location with the added benefit
of easier and quicker installation.
B230D01JM
1
FEATURES OF YOUR HYUNDAI
37
CAUTION:
Do not allow the rear seat belt web-
bing to get scratched or pinched by
the ISOFIX-seat latch and ISOFIX
anchor during the installation.
!
NOTE:
An ISOFIX-child-seat can only be
installed if the seat has a vehicle-
specific approval according to ECE-
R44. Before using the ISOFIX-child-
seat, which was bought for another
car, ask your Hyundai-dealer
whether this seat-type is approved
and recommended for your
Hyundai.
B230D03JM
1. To engage the child restraint seat to
the ISOFIX anchor, insert the child
restraint seat latch into the ISOFIX
anchor. Listen for the audible "click"
sound.
To secure the child restraint seat
!
WARNING:
o Do not install a child safety seat
at the center of the rear seat
using the vehicle's ISOFIX an-
chors. The ISOFIX anchors are
only provided for the left and
right outboard rear seating posi-
tions. Do not misuse the ISOFIX
anchors by attempting to attach a
child sefety seat in the middle of
the rear seat position to the ISOFIX
anchors.
In a crash, the child seat ISOFIX
attachments may not be strong
enough to secure the child re-
straint seat properly in the center
of the rear seat and may break,
causing serious injury or death.
2. Connect the tether strap hook to the
child restraint hook holder and tighten
to secure the seat. Refer to "Secur-
ing a Child Restraint System with the
Tether Anchorage System" on page
1-35.
1
FEATURES OF YOUR HYUNDAI
38
!
WARNING:
To obtain maximum benefit from a
pre-tensioner seat belt:
1. The seat belt must be worn cor-
rectly.
2. The seat belt must be adjusted to
the correct position.
1LDE3100
Driver's airbag
1
2
Passenger's
airbag
The seat belt pre-tensioner system
consists mainly of the following compo-
nents.
Their locations are shown in the illus-
tration.
1. SRS airbag warning light
2. Retractor pre-tensioner assembly
3. SRS control module
3
o When using the vehicle’s “ISOFIX”
system to install a child restraint
system in the rear seat, all unused
vehicle rear seat belt metal latch
plates or tabs must be latched
securely in their seat belt buckles
and the seat belt webbing must be
retracted behind the child restraint
to prevent the child from reaching
and taking hold of unretracted seat
belts. Unlatched metal latch plates
or tabs may allow the child to
reach the unretracted seat belts
which may result in strangulation
and a serious injury or death to the
child in the child restraint.
o Do not mount more than one child
restraint to a single tether or to a
child restraint lower anchorage
point. The improper increased load
may cause the anchorage points
or tether anchor to break, causing
serious injury or death.
o Attach the ISOFIX or ISOFIX-com-
patible child seat only to the ap-
propriate locations shown.
o Always follow the installation and
use instructions provided by the
manufacturer of the child restraint.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position. In certain frontal colli-
sions, the pre-tensioner will activate
and pull the seat belt into tighter contact
against the occupant's body.
HXG229
B180B03JM-GAT
Pre-tensioner Seat Belt
(If installed)
Your Hyundai vehicle is equipped with
driver's and front passenger's pre-
tensioner seat belts. The purpose of
the pre-tensioner is to make sure that
the seat belts fit tightly against the
occupant's body in certain frontal col-
lisions.
The pre-tensioner seat belts can be
activated with the airbags.
1
FEATURES OF YOUR HYUNDAI
39
CAUTION:
o Because the sensor that activates
the SRS airbag is connected with
pre-tensioner seat belt, the SRS
airbag warning light on the
instrument panel will come on
for approximately 6 seconds af-
ter the ignition key has been turned
to the "ON" position, and then it
should turn off.
o If pre-tensioner seat belt is not
working properly, this warning
light will illuminate even if there is
no malfunction of the SRS airbag.
If the SRS airbag warning light
does not illuminate when the igni-
tion key is turned to "ON", or if it
remains illuminated after coming
for approximately 6 seconds, or if
it illuminates while the vehicle is
being driven, please have an au-
thorized Hyundai dealer inspect
the pre-tensioner seat belts and
SRS airbag system as soon as
possible.
!
AIR
BAG
NOTE:
o Both the driver's and front
passenger's pre-tensioner seat
belts will be activated in certain
frontal collisions. The pre-
tensioner seat belts can be acti-
vated with the airbags. The pre-
tensioners will be activated even
if the seat belts are not being
worn at the time of the collision.
o When the pre-tensioner seat belts
are activated, a loud noise may
be heard and fine dust, which
may appear to be smoke, may be
visible in the passenger compart-
ment. These are normal operat-
ing conditions and are not haz-
ardous.
o Although it is harmless, the fine
dust may cause skin irritation
and should not be breathed for
prolonged periods. Wash your
hands and face thoroughly after
an accident in which the pre-
tensioner seat belts were activated.
!
WARNING:
o Pre-tensioners are designed to
operate only one time. After acti-
vation, pre-tensioner seat belts
must be replaced. All seat belts, of
any type, should always be re-
placed after they have been worn
during a collision.
o The pre-tensioner seat belt as-
sembly mechanisms become hot
during activation. Do not touch
the pre-tensioner seat belt as-
semblies for several minutes after
they have been activated.
o Do not attempt to inspect or re-
place the pre-tensioner seat belts
yourself. This must be done by an
authorized Hyundai dealer.
o Do not strike the pre-tensioner
seat belt assemblies.
o Do not attempt to service or re-
pair the pre-tensioner seat belt
system in any manner.

Related Topics

Popular Owner Manuals