2004-2009 Hyundai Tucson SUV FEATURES OF YOUR HYUNDAI -> CRUISE CONTROL User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

FEATURES OF YOUR HYUNDAI -> CRUISE CONTROL for Your Hyundai Tucson SUV First Generation (2004-2009)

1
FEATURES OF YOUR HYUNDAI
94
HEADLIGHT LEVELING DE-
VICE SYSTEM
B340G01O -GAT
(If installed)
OJM019051
To adjust the headlight beam level ac-
cording to the number of the passen-
gers and the loading weight in the lug-
gage area, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam
level. Always keep the headlight beam
at the proper leveling position, or head-
lights may dazzle other road users.
Listed below are the examples of proper
CRUISE CONTROL
B660A01S-GAT
(If installed)
The cruise control system provides
automatic speed control for your com-
fort when driving on freeways, tollroads,
or other noncongested highways. This
is designed to function above approxi-
mately 40 km/h (25 mph).
OJM019070
Main Switch
Switch position
0
0
1
1
2
3
Loading condition
Driver only
Driver + Front passenger
Driver + Front passenger
+ Farthest Rear Seat Full
Full Passengers
Full passengers +
Maximum Permissible
Loading
Driver + Maximum
permissible loading
switch settings. For loading conditions
other than those listed below, adjust
the switch position so that the beam
level may be the nearest as the condi-
tion obtained according to the list.
B660A02JM
Main Switch
Type A
Type B
1
FEATURES OF YOUR HYUNDAI
95
!
2. Accelerate to the desired cruising
speed above 40 km/h (25 mph).
3. Push the control switch downward to
"SET/COAST" or "−/SET" and re-
lease it.
If the "SET/COAST" or "−/SET"
switch is selected, the cruise "SET"
indicator light in the instrument clus-
ter will illuminate.
4. Remove your foot from the accelera-
tor pedal and the desired speed will
automatically be maintained.
5. To increase speed, depress the ac-
celerator pedal enough for the ve-
hicle to exceed the preset speed.
When you remove your foot from the
accelerator pedal, the vehicle will
return to the speed you have set.
WARNING:
To avoid accidental cruise control
engagement, keep the cruise con-
trol main switch off when not using
the cruise control.
B660C03E-AAT
To Cancel the Cruise Speed
To disengage the cruise control sys-
tem, pull the control switch toward the
steering wheel to the "CANCEL" posi-
tion. Additionally, the following actions
will disengage the system:
OJM019072
B660C02JM
Type B
Type A
B660B03E-GAT
To Set the Cruise Speed
1. Push in the cruise control main switch
on the end of the barrel. The
"CRUISE" indicator light in the in-
strument cluster will be illuminated.
This turns the system on.
OJM019071
B660B02JM
Type B
Type A
1
FEATURES OF YOUR HYUNDAI
96
o Depress the brake pedal.
o Depress the clutch pedal (Manual
transaxle).
o Shift the selector lever to "P" or "N"
position (Automatic transaxle).
o Decrease the vehicle speed to less
than 40 km/h (25 mph).
o Release the main switch.
B660D03E-AAT
To Resume the Preset Speed
The vehicle will automatically resume
the speed set prior to cancellation when
you push the control switch upward to
the "RES/ACC" or "+/RES" position
and release it, providing the vehicle
speed is above 40 km/h (25 mph).
OJM019073
B660D02JM
Type B
Type A
B660E02E-AAT
To Reset at a Faster Speed
1. Push the control switch upward to
the "RES/ACC" or "+/RES" position
and hold it.
If the control switch "RES/ACC" or
"+/RES" is selected, the cruise
"SET" indicator in the instrument
cluster will illuminate.
2. Accelerate to desired speed and re-
lease the control switch. While the
control switch is held, the vehicle will
gradually gain speed.
If the control switch "RES/ACC" or "+/
RES" is selected, the cruise "SET"
indicator in the instrument cluster will
illuminate.
1
FEATURES OF YOUR HYUNDAI
97
o Pay particular attention to the driv-
ing conditions whenever using the
cruise control system.
o During cruise-control driving
with a manual transaxle vehicle,
do not shift into neutral without
depressing the clutch pedal, or
the engine will be overrevved. If
this happens, depress the clutch
pedal or release the main switch.
o With the cruise control engaged,
when the brake pedal is applied,
it is normal to hear the cruise
control system deactivate. This
is an indication of normal system
operation.
o During normal cruise control
operation, when the "SET /
COAST" or "
−−
−−
−/SET" is activated or
reactivated after applying the
brakes, the cruise control will en-
ergize after approximately 3 sec-
onds. This delay is normal.
!
WARNING:
o Keep the main switch off when not
using the cruise control.
o Use the cruise control system
only when traveling on open high-
ways in good weather.
o Do not use the cruise control
when it may not be safe to keep
the car at a constant speed, for
instance, driving in heavy or vary-
ing traffic, or on slippery (rainy,
icy or snow-covered) or winding
roads or over 6% up-hill or down-
hill roads.
If the "SET/COAST" or "−/SET"
switch is selected, the cruise "SET"
indicator light in the instrument clus-
ter will illuminate.
2. When the desired speed is obtained,
release the control switch. While
the control switch is pushed, the
vehicle speed will gradually decrease.
B660F04E-AAT
To Reset at a Slower Speed
OJM019071
B660B02JM
Type B
Type A
1. Push the control switch downward to
"SET/COAST" or " ⎯ /SET" and
hold it. The vehicle will decelerate.

Related Topics

Popular Owner Manuals